From: Alim Akhtar <alim.akhtar@samsung.com>
To: amit daniel kachhap <amit.daniel@samsung.com>
Cc: linux-scsi@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
vinholikatti@gmail.com, JBottomley@odin.com,
Seungwon Jeon <tgih.jun@samsung.com>
Subject: Re: [PATCH 02/10] scsi: ufs: add quirk to contain unconformable utrd field
Date: Fri, 28 Aug 2015 15:03:33 +0530 [thread overview]
Message-ID: <55E02AED.8060209@samsung.com> (raw)
In-Reply-To: <CADGdYn4NFms4bjOf+EBnzH3umz4wSPSn9dGGnVgNbs3v6u4m+g@mail.gmail.com>
Hi Amit,
Thanks for your review comments.
On 08/26/2015 11:43 AM, amit daniel kachhap wrote:
> Few minor comments below,
>
> On Fri, Aug 21, 2015 at 2:57 PM, Alim Akhtar <alim.akhtar@samsung.com> wrote:
>> From: Seungwon Jeon <tgih.jun@samsung.com>
>>
>> UTRD(UTP Transfer Request Descriptor)'s field such as offset/length,
>> especially response's has DWORD expression. This quirk can be specified
>> for host controller not to conform standard.
>>
>> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> ---
>> drivers/scsi/ufs/ufshcd.c | 28 +++++++++++++++++++++-------
>> drivers/scsi/ufs/ufshcd.h | 7 +++++++
>> 2 files changed, 28 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index b0ade73..f882bf0 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -1009,7 +1009,7 @@ ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
>> *
>> * Returns 0 in case of success, non-zero value in case of failure
>> */
>> -static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
>> +static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>> {
>> struct ufshcd_sg_entry *prd_table;
>> struct scatterlist *sg;
>> @@ -1023,8 +1023,13 @@ static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
>> return sg_segments;
>>
>> if (sg_segments) {
>> - lrbp->utr_descriptor_ptr->prd_table_length =
>> - cpu_to_le16((u16) (sg_segments));
>> + if (hba->quirks & UFSHCI_QUIRK_BROKEN_UTRD)
>> + lrbp->utr_descriptor_ptr->prd_table_length =
>> + cpu_to_le16((u16)(sg_segments *
>> + sizeof(struct ufshcd_sg_entry)));
>> + else
>> + lrbp->utr_descriptor_ptr->prd_table_length =
>> + cpu_to_le16((u16) (sg_segments));
>>
>> prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
>>
>> @@ -1347,7 +1352,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>>
>> /* form UPIU before issuing the command */
>> ufshcd_compose_upiu(hba, lrbp);
>> - err = ufshcd_map_sg(lrbp);
>> + err = ufshcd_map_sg(hba, lrbp);
>> if (err) {
>> lrbp->cmd = NULL;
>> clear_bit_unlock(tag, &hba->lrb_in_use);
>> @@ -2035,12 +2040,21 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
>> cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
>>
>> /* Response upiu and prdt offset should be in double words */
> This comment can be moved below for the else case.
ok
>> - utrdlp[i].response_upiu_offset =
>> + if (hba->quirks & UFSHCI_QUIRK_BROKEN_UTRD) {
>> + utrdlp[i].response_upiu_offset =
>> + cpu_to_le16(response_offset);
>> + utrdlp[i].prd_table_offset =
>> + cpu_to_le16(prdt_offset);
>> + utrdlp[i].response_upiu_length =
>> + cpu_to_le16(ALIGNED_UPIU_SIZE);
>> + } else {
>> + utrdlp[i].response_upiu_offset =
>> cpu_to_le16((response_offset >> 2));
>> - utrdlp[i].prd_table_offset =
>> + utrdlp[i].prd_table_offset =
>> cpu_to_le16((prdt_offset >> 2));
>> - utrdlp[i].response_upiu_length =
>> + utrdlp[i].response_upiu_length =
>> cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
>> + }
>>
>> hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
>> hba->lrb[i].ucd_req_ptr =
>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>> index c40a0e7..1fa5ac1 100644
>> --- a/drivers/scsi/ufs/ufshcd.h
>> +++ b/drivers/scsi/ufs/ufshcd.h
>> @@ -459,6 +459,13 @@ struct ufs_hba {
>> */
>> #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION UFS_BIT(5)
>>
>> + /*
>> + * This quirk needs to be enabled if host controller doesn't conform
>> + * with UTRD. Some fields such as offset/length might not be in double word,
>> + * but in byte.
>> + */
>> + #define UFSHCI_QUIRK_BROKEN_UTRD UFS_BIT(6)
> This macro name may be given more meaningful name such as
> UFSHCI_QUIRK_BYTE_ALIGN_UTRD or something similar.
ok, will change
>> +
>> unsigned int quirks; /* Deviations from standard UFSHCI spec. */
>>
>> wait_queue_head_t tm_wq;
>> --
>> 1.7.10.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2015-08-28 9:42 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 9:27 [PATCH 00/10] exynos-ufs: add support for Exynos Alim Akhtar
2015-08-21 9:27 ` [PATCH 01/10] phy: exynos-ufs: add UFS PHY driver for EXYNOS SoC Alim Akhtar
2015-08-23 22:45 ` Alexey Klimov
2015-08-28 13:01 ` Alim Akhtar
2015-08-26 6:09 ` amit daniel kachhap
2015-09-18 5:35 ` Kishon Vijay Abraham I
2015-10-01 4:28 ` Alim Akhtar
2015-08-21 9:27 ` [PATCH 02/10] scsi: ufs: add quirk to contain unconformable utrd field Alim Akhtar
2015-08-26 6:13 ` amit daniel kachhap
2015-08-28 9:33 ` Alim Akhtar [this message]
2015-08-21 9:27 ` [PATCH 03/10] scsi: ufs: add quirk to fix mishandling utrlclr/utmrlclr Alim Akhtar
2015-08-21 9:27 ` [PATCH 04/10] scsi: ufs: add quirk not to allow reset of interrupt aggregation Alim Akhtar
2015-08-26 6:16 ` amit daniel kachhap
2015-09-17 8:30 ` Alim Akhtar
2015-08-21 9:27 ` [PATCH 05/10] scsi: ufs: add quirk to enable host controller without hce Alim Akhtar
2015-08-21 9:27 ` [PATCH 06/10] scsi: ufs: add specific callback for nexus type Alim Akhtar
2015-08-21 9:27 ` [PATCH 07/10] scsi: ufs: add add specific callback for hibern8 Alim Akhtar
2015-08-26 6:21 ` amit daniel kachhap
2015-09-17 8:31 ` Alim Akhtar
2015-08-21 9:27 ` [PATCH 08/10] scsi: ufs: make ufshcd_config_pwr_mode of non-static func Alim Akhtar
2015-08-26 6:23 ` amit daniel kachhap
2015-09-17 8:33 ` Alim Akhtar
2015-08-21 9:28 ` [PATCH 09/10] scsi: ufs: return value of pwr_change_notify Alim Akhtar
2015-08-26 6:25 ` amit daniel kachhap
2015-09-17 8:33 ` Alim Akhtar
2015-08-21 9:28 ` [PATCH 10/10] scsi: ufs-exynos: add UFS host support for Exynos SoCs Alim Akhtar
2015-08-26 6:42 ` amit daniel kachhap
2015-09-17 5:34 ` Alim Akhtar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55E02AED.8060209@samsung.com \
--to=alim.akhtar@samsung.com \
--cc=JBottomley@odin.com \
--cc=amit.daniel@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=tgih.jun@samsung.com \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome