Re: [PATCH] cpufreq: imx6q-cpufreq: Fix speed grading check for imx6qp

["Stefan Riedmüller" <s.riedmueller@phytec.de>]

Hi,

On 19.12.2017 18:02, Lucas Stach wrote:
> Am Dienstag, den 19.12.2017, 16:56 +0100 schrieb Stefan Riedmueller:
>> Add compatibility for the i.MX 6QuadPlus to make it behave like the
>> i.MX 6Quad, as both SOCs use the same operating points. Otherwise the
>> i.MX 6QuadPlus tries to run with 1.2 GHz even though it only
>> supports 1 GHz.
> There is already an applied patch to fix this issue:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/commit/?h=bleeding-edge&id=ccc153a6de1f7741b5ef7c996f9be133772b2092
>
> Regards,
> Lucas
Sorry, I missed that.
So please drop this patch.

Thanks,
Stefan
>> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
>> ---
>>   drivers/cpufreq/imx6q-cpufreq.c | 8 +++++---
>>   1 file changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
>> index 628fe89..5ca1988 100644
>> --- a/drivers/cpufreq/imx6q-cpufreq.c
>> +++ b/drivers/cpufreq/imx6q-cpufreq.c
>> @@ -218,7 +218,7 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
>>>   	 * SPEED_GRADING[1:0] defines the max speed of ARM:
>>>   	 * 2b'11: 1200000000Hz;
>>>   	 * 2b'10: 996000000Hz;
>>> -	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
>>> +	 * 2b'01: 852000000Hz; -- i.MX6Q/QP Only, exclusive with 996MHz.
>>>   	 * 2b'00: 792000000Hz;
>>>   	 * We need to set the max speed of ARM according to fuse map.
>>>   	 */
>> @@ -227,13 +227,15 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
>>>   	val &= 0x3;
>>   
>>>   	if ((val != OCOTP_CFG3_SPEED_1P2GHZ) &&
>>> -	     of_machine_is_compatible("fsl,imx6q"))
>>> +	    (of_machine_is_compatible("fsl,imx6q") ||
>>> +	     of_machine_is_compatible("fsl,imx6qp")))
>>>   		if (dev_pm_opp_disable(dev, 1200000000))
>>>   			dev_warn(dev, "failed to disable 1.2GHz OPP\n");
>>>   	if (val < OCOTP_CFG3_SPEED_996MHZ)
>>>   		if (dev_pm_opp_disable(dev, 996000000))
>>>   			dev_warn(dev, "failed to disable 996MHz OPP\n");
>>> -	if (of_machine_is_compatible("fsl,imx6q")) {
>>> +	if (of_machine_is_compatible("fsl,imx6q") ||
>>> +	    of_machine_is_compatible("fsl,imx6qp")) {
>>>   		if (val != OCOTP_CFG3_SPEED_852MHZ)
>>>   			if (dev_pm_opp_disable(dev, 852000000))
>>>   				dev_warn(dev, "failed to disable 852MHz OPP\n");