Re: [PATCH] net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello!

On 8/18/2017 9:55 AM, Stephan Gatzka wrote:

> When using MII/GMII/SGMII in the Altera SoC, the phy needs to be
> wired through the FPGA. To ensure correct behavior, the appropriate
> bit in the System Manager FPGA Interface Group register needs to be
> set.
> 
> Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
> ---
>   drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> index 17d4bba..d7c231b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> @@ -269,7 +269,10 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
>   	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
>   	ctrl |= val << reg_shift;
>   
> -	if (dwmac->f2h_ptp_ref_clk) {
> +	if ((dwmac->f2h_ptp_ref_clk) ||
> +	    (phymode == PHY_INTERFACE_MODE_MII) ||
> +	    (phymode == PHY_INTERFACE_MODE_GMII) ||
> +	    (phymode == PHY_INTERFACE_MODE_SGMII)) {

    Inner parens not needed at all (especially the first pair).

[...]

MBR, Sergei