From: "Nuno Sá" <noname.nuno@gmail.com>
To: "Angelo Dureghello" <adureghello@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Jonathan Corbet" <corbet@lwn.net>,
"Olivier Moysan" <olivier.moysan@foss.st.com>,
"Michael Hennerich" <Michael.Hennerich@analog.com>
Cc: linux-iio@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/5] iio: dac: adi-axi-dac: add cntrl chan check
Date: Mon, 07 Apr 2025 17:11:48 +0100 [thread overview]
Message-ID: <55fea555e7fc756d26220b6c9a06053f8ae5dc56.camel@gmail.com> (raw)
In-Reply-To: <20250407-wip-bl-ad3552r-fixes-v3-1-61874065b60f@baylibre.com>
On Mon, 2025-04-07 at 10:52 +0200, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@baylibre.com>
>
> Add validity check on CNTRL_X channels (valid as 0 to 15).
>
> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
> ---
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> drivers/iio/dac/adi-axi-dac.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/iio/dac/adi-axi-dac.c b/drivers/iio/dac/adi-axi-dac.c
> index
> 892d770aec69c4259de777058801c9ab33c79923..f86acb98b0cffb09bf4d4626f932bf1edc91
> 1e2b 100644
> --- a/drivers/iio/dac/adi-axi-dac.c
> +++ b/drivers/iio/dac/adi-axi-dac.c
> @@ -84,6 +84,7 @@
> #define AXI_DAC_CHAN_CNTRL_7_REG(c) (0x0418 + (c) * 0x40)
> #define AXI_DAC_CHAN_CNTRL_7_DATA_SEL GENMASK(3, 0)
>
> +#define AXI_DAC_CHAN_CNTRL_MAX 15
> #define AXI_DAC_RD_ADDR(x) (BIT(7) | (x))
>
> /* 360 degrees in rad */
> @@ -186,6 +187,9 @@ static int __axi_dac_frequency_get(struct axi_dac_state
> *st, unsigned int chan,
> u32 reg, raw;
> int ret;
>
> + if (chan > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> if (!st->dac_clk) {
> dev_err(st->dev, "Sampling rate is 0...\n");
> return -EINVAL;
> @@ -230,6 +234,9 @@ static int axi_dac_scale_get(struct axi_dac_state *st,
> int ret, vals[2];
> u32 reg, raw;
>
> + if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> if (tone_2)
> reg = AXI_DAC_CHAN_CNTRL_3_REG(chan->channel);
> else
> @@ -264,6 +271,9 @@ static int axi_dac_phase_get(struct axi_dac_state *st,
> u32 reg, raw, phase;
> int ret, vals[2];
>
> + if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> if (tone_2)
> reg = AXI_DAC_CHAN_CNTRL_4_REG(chan->channel);
> else
> @@ -291,6 +301,9 @@ static int __axi_dac_frequency_set(struct axi_dac_state
> *st, unsigned int chan,
> u16 raw;
> int ret;
>
> + if (chan > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> if (!sample_rate || freq > sample_rate / 2) {
> dev_err(st->dev, "Invalid frequency(%u) dac_clk(%llu)\n",
> freq, sample_rate);
> @@ -342,6 +355,9 @@ static int axi_dac_scale_set(struct axi_dac_state *st,
> u32 raw = 0, reg;
> int ret;
>
> + if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> ret = iio_str_to_fixpoint(buf, 100000, &integer, &frac);
> if (ret)
> return ret;
> @@ -385,6 +401,9 @@ static int axi_dac_phase_set(struct axi_dac_state *st,
> u32 raw, reg;
> int ret;
>
> + if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> ret = iio_str_to_fixpoint(buf, 100000, &integer, &frac);
> if (ret)
> return ret;
> @@ -493,6 +512,9 @@ static int axi_dac_data_source_set(struct iio_backend
> *back, unsigned int chan,
> {
> struct axi_dac_state *st = iio_backend_get_priv(back);
>
> + if (chan > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> +
> switch (data) {
> case IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE:
> return regmap_update_bits(st->regmap,
> @@ -521,6 +543,8 @@ static int axi_dac_set_sample_rate(struct iio_backend
> *back, unsigned int chan,
> unsigned int freq;
> int ret, tone;
>
> + if (chan > AXI_DAC_CHAN_CNTRL_MAX)
> + return -EINVAL;
> if (!sample_rate)
> return -EINVAL;
> if (st->reg_config & AXI_DAC_CONFIG_DDS_DISABLE)
next prev parent reply other threads:[~2025-04-07 16:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-07 8:52 [PATCH v3 0/5] iio: ad3552r-hs: add support for internal ramp generator Angelo Dureghello
2025-04-07 8:52 ` [PATCH v3 1/5] iio: dac: adi-axi-dac: add cntrl chan check Angelo Dureghello
2025-04-07 16:11 ` Nuno Sá [this message]
2025-04-07 8:52 ` [PATCH v3 2/5] docs: iio: add documentation for ad3552r driver Angelo Dureghello
2025-04-07 8:52 ` [PATCH v3 3/5] iio: backend: add support for data source get Angelo Dureghello
2025-04-07 16:12 ` Nuno Sá
2025-04-07 8:52 ` [PATCH v3 4/5] iio: dac: adi-axi-dac: add " Angelo Dureghello
2025-04-07 16:13 ` Nuno Sá
2025-04-07 8:52 ` [PATCH v3 5/5] iio: dac: ad3552r-hs: add support for internal ramp Angelo Dureghello
2025-04-07 16:21 ` Nuno Sá
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55fea555e7fc756d26220b6c9a06053f8ae5dc56.camel@gmail.com \
--to=noname.nuno@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=adureghello@baylibre.com \
--cc=corbet@lwn.net \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®