mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Larry Finger <Larry.Finger@lwfinger.net>
To: Punit Vara <punitvara@gmail.com>
Cc: florian.c.schilhabel@googlemail.com, gregkh@linuxfoundation.org,
	sudipm.mukherjee@gmail.com, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org, dogukan.ergun@gmail.com,
	stillcompiling@gmail.com, Joe Perches <joe@perches.com>
Subject: Re: [PATCH] Staging: rtl8712: rtl871x_ioctl_linux.c Move constant to right side of the comparision
Date: Sat, 26 Sep 2015 12:45:46 -0500	[thread overview]
Message-ID: <5606D9CA.1040502@lwfinger.net> (raw)
In-Reply-To: <1443286161-3003-1-git-send-email-punitvara@gmail.com>

On 09/26/2015 11:49 AM, Punit Vara wrote:
> This patch is to the rtl871x_ioctl_linux.c that fixes up following
> warning reported by checkpatch.pl :
>
> - Comparisons should place the constant on the right side of the test
>
> Signed-off-by: Punit Vara <punitvara@gmail.com>

This warning is crap. WTF difference does it make???? The compiler does not 
care, and any reader with any piece of a brain is not going to be confused!

This patch and all others like it are just meaningless source churning!

This author has made such a royal mess of his patches that I recommend that ALL 
of them be dropped. In addition, we should continue to drop his changes until he 
learns how to use git to generate N/M patches, and until he reads the 
documentation on patch submission.

Larry

> ---
>   drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 16 ++++++++--------
>   1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> index 143be0f..6d7f8f7 100644
> --- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> +++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> @@ -957,7 +957,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
>   	if (IS_ERR(ext))
>   		return PTR_ERR(ext);
>
> -	if (0 == strcasecmp(ext, "RSSI")) {
> +	if (strcasecmp(ext, "RSSI") == 0) {
>   		/*Return received signal strength indicator in -db for */
>   		/* current AP */
>   		/*<ssid> Rssi xx */
> @@ -974,7 +974,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
>   		} else {
>   			sprintf(ext, "OK");
>   		}
> -	} else if (0 == strcasecmp(ext, "LINKSPEED")) {
> +	} else if (strcasecmp(ext, "LINKSPEED") == 0) {
>   		/*Return link speed in MBPS */
>   		/*LinkSpeed xx */
>   		union iwreq_data wrqd;
> @@ -982,30 +982,30 @@ static int r871x_wx_set_priv(struct net_device *dev,
>   		int mbps;
>
>   		ret_inner = r8711_wx_get_rate(dev, info, &wrqd, extra);
> -		if (0 != ret_inner)
> +		if (ret_inner != 0)
>   			mbps = 0;
>   		else
>   			mbps = wrqd.bitrate.value / 1000000;
>   		sprintf(ext, "LINKSPEED %d", mbps);
> -	} else if (0 == strcasecmp(ext, "MACADDR")) {
> +	} else if (strcasecmp(ext, "MACADDR") == 0) {
>   		/*Return mac address of the station */
>   		/* Macaddr = xx:xx:xx:xx:xx:xx */
>   		sprintf(ext, "MACADDR = %pM", dev->dev_addr);
> -	} else if (0 == strcasecmp(ext, "SCAN-ACTIVE")) {
> +	} else if (strcasecmp(ext, "SCAN-ACTIVE") == 0) {
>   		/*Set scan type to active */
>   		/*OK if successful */
>   		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
>
>   		pmlmepriv->passive_mode = 1;
>   		sprintf(ext, "OK");
> -	} else if (0 == strcasecmp(ext, "SCAN-PASSIVE")) {
> +	} else if (strcasecmp(ext, "SCAN-PASSIVE") == 0) {
>   		/*Set scan type to passive */
>   		/*OK if successful */
>   		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
>
>   		pmlmepriv->passive_mode = 0;
>   		sprintf(ext, "OK");
> -	} else if (0 == strncmp(ext, "DCE-E", 5)) {
> +	} else if (strncmp(ext, "DCE-E", 5) == 0) {
>   		/*Set scan type to passive */
>   		/*OK if successful */
>   		r8712_disconnectCtrlEx_cmd(padapter
> @@ -1015,7 +1015,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
>   			, 5000 /*u32 firstStageTO */
>   		);
>   		sprintf(ext, "OK");
> -	} else if (0 == strncmp(ext, "DCE-D", 5)) {
> +	} else if (strncmp(ext, "DCE-D", 5) == 0) {
>   		/*Set scan type to passive */
>   		/*OK if successfu */
>   		r8712_disconnectCtrlEx_cmd(padapter
>


  reply	other threads:[~2015-09-26 17:45 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-26 16:49 Punit Vara
2015-09-26 17:45 ` Larry Finger [this message]
2015-09-26 17:54   ` punit vara
2015-09-26 18:11     ` Joshua Clayton
2015-09-28  8:35     ` Dan Carpenter
2015-09-28 11:18   ` Sudip Mukherjee
2015-09-28 13:46     ` punit vara
2015-09-28 14:56     ` Larry Finger
2015-09-28 15:19       ` Sudip Mukherjee
2015-09-29 20:24       ` Tillmann Heidsieck
2015-09-30  9:34         ` Dan Carpenter
2015-10-09 14:54           ` Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5606D9CA.1040502@lwfinger.net \
    --to=larry.finger@lwfinger.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=dogukan.ergun@gmail.com \
    --cc=florian.c.schilhabel@googlemail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=punitvara@gmail.com \
    --cc=stillcompiling@gmail.com \
    --cc=sudipm.mukherjee@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome