Re: [PATCH v2 1/2] dt-bindings:iio:adc: add max14001

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 05/06/2023 15:07, Kim Seer Paller wrote:
> The MAX14001 is configurable, isolated 10-bit ADCs for multi-range
> binary inputs.
> 
> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

You missed at least DT list (maybe more), so this won't be tested.
Please resend and include all necessary entries.

Subject - ignored comments.

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> ---
>  .../bindings/iio/adc/adi,max14001.yaml        | 55 +++++++++++++++++++
>  MAINTAINERS                                   |  7 +++
>  2 files changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
> new file mode 100644
> index 000000000..1b17f5dc0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX14001 ADC
> +
> +maintainers:
> +  - Kim Seer Paller <kimseer.paller@analog.com>
> +
> +description: |
> +    Single channel 10 bit ADC with SPI interface. Datasheet
> +    can be found here:
> +      https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,max14001
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    maximum: 5000000
> +
> +  vref-supply:
> +    description: Voltage reference to establish input scaling.
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#

Place it like other bindings, so after required or before properties.

Anyway, what happened with all the properties you had here and should be
switched to generic ones?

> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        status = "okay";

Really... You did not respond to my feedback, so sending uncorrected
version feels like being ignored. :(

Best regards,
Krzysztof