From: Jacek Anaszewski <j.anaszewski@samsung.com>
To: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: rpurdie@rpsys.net, linux-leds@vger.kernel.org,
cooloney@gmail.com, kyungmin.park@samsung.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] leds: triggers: add invert to heartbeat
Date: Wed, 07 Oct 2015 15:32:02 +0200 [thread overview]
Message-ID: <56151ED2.5020300@samsung.com> (raw)
In-Reply-To: <d59e47a523eb7e21f3986f316569cd48810bdc35.1444209737.git.jiri.prchal@aksignal.cz>
Hi Jiri,
Thanks for the patch. It's nice in general, but please see my
comments below.
On 10/07/2015 11:31 AM, Jiri Prchal wrote:
> This patcht adds possibility to invert heartbeat blinking. The inverted LED is
> more time ON then OFF.
> It's because it looks better when the heartbeat LED is next to other LED which
> is most time ON.
> The invert value is exported same way via sysfs in file invert like oneshot. I
> get inspiration from this trigger.
Please adjust commit message so as it wouldn't exceed 75 characters line
length limit. scripts/checkpatch.pl is useful for catching this kind of
problems.
> Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
> ---
> drivers/leds/trigger/ledtrig-heartbeat.c | 49 ++++++++++++++++++++++++++++++--
> 1 file changed, 47 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
> index fea6871..c09c30b 100644
> --- a/drivers/leds/trigger/ledtrig-heartbeat.c
> +++ b/drivers/leds/trigger/ledtrig-heartbeat.c
> @@ -27,6 +27,7 @@ struct heartbeat_trig_data {
> unsigned int phase;
> unsigned int period;
> struct timer_list timer;
> + unsigned int invert;
> };
>
> static void led_heartbeat_function(unsigned long data)
> @@ -56,21 +57,27 @@ static void led_heartbeat_function(unsigned long data)
> msecs_to_jiffies(heartbeat_data->period);
> delay = msecs_to_jiffies(70);
> heartbeat_data->phase++;
> - brightness = led_cdev->max_brightness;
> + if (!heartbeat_data->invert)
> + brightness = led_cdev->max_brightness;
> break;
> case 1:
> delay = heartbeat_data->period / 4 - msecs_to_jiffies(70);
> heartbeat_data->phase++;
> + if (heartbeat_data->invert)
> + brightness = led_cdev->max_brightness;
As you are at it, could you change, in a separate patch,
led_cdev->max_brightness to led_cdev->brightness? I think there is no
reason for which we shouldn't allow other values than max.
> break;
> case 2:
> delay = msecs_to_jiffies(70);
> heartbeat_data->phase++;
> - brightness = led_cdev->max_brightness;
> + if (!heartbeat_data->invert)
> + brightness = led_cdev->max_brightness;
> break;
> default:
> delay = heartbeat_data->period - heartbeat_data->period / 4 -
> msecs_to_jiffies(70);
> heartbeat_data->phase = 0;
> + if (heartbeat_data->invert)
> + brightness = led_cdev->max_brightness;
> break;
> }
>
> @@ -78,15 +85,50 @@ static void led_heartbeat_function(unsigned long data)
> mod_timer(&heartbeat_data->timer, jiffies + delay);
> }
>
> +static ssize_t led_invert_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct heartbeat_trig_data *heartbeat_data = led_cdev->trigger_data;
> +
> + return sprintf(buf, "%u\n", heartbeat_data->invert);
> +}
> +
> +static ssize_t led_invert_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct heartbeat_trig_data *heartbeat_data = led_cdev->trigger_data;
> + unsigned long state;
> + int ret;
> +
> + ret = kstrtoul(buf, 0, &state);
> + if (ret)
> + return ret;
> +
> + heartbeat_data->invert = !!state;
> +
> + return size;
> +}
> +
> +static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
> +
> static void heartbeat_trig_activate(struct led_classdev *led_cdev)
> {
> struct heartbeat_trig_data *heartbeat_data;
> + int rc;
>
> heartbeat_data = kzalloc(sizeof(*heartbeat_data), GFP_KERNEL);
> if (!heartbeat_data)
> return;
>
> led_cdev->trigger_data = heartbeat_data;
> + rc = device_create_file(led_cdev->dev, &dev_attr_invert);
> + if (rc) {
> + kfree(led_cdev->trigger_data);
> + return;
> + }
> +
> setup_timer(&heartbeat_data->timer,
> led_heartbeat_function, (unsigned long) led_cdev);
> heartbeat_data->phase = 0;
> @@ -100,9 +142,12 @@ static void heartbeat_trig_deactivate(struct led_classdev *led_cdev)
>
> if (led_cdev->activated) {
> del_timer_sync(&heartbeat_data->timer);
> + device_remove_file(led_cdev->dev, &dev_attr_invert);
> kfree(heartbeat_data);
> led_cdev->activated = false;
> }
> +
> + led_set_brightness(led_cdev, LED_OFF);
I believe this is a fix. Could you split it into a separate patch
and explain its merit?
> }
>
> static struct led_trigger heartbeat_led_trigger = {
>
--
Best Regards,
Jacek Anaszewski
next prev parent reply other threads:[~2015-10-07 13:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 9:31 Jiri Prchal
2015-10-07 13:32 ` Jacek Anaszewski [this message]
2015-10-07 14:14 ` Jiří Prchal
2015-10-08 7:43 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56151ED2.5020300@samsung.com \
--to=j.anaszewski@samsung.com \
--cc=cooloney@gmail.com \
--cc=jiri.prchal@aksignal.cz \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome