From: David Daney <ddaney@caviumnetworks.com>
To: "Sean O. Stalley" <sean.stalley@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: David Daney <ddaney.cavm@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Rafal Milecki" <zajec5@gmail.com>,
"linux-api@vger.kernel.org" <linux-api@vger.kernel.org>,
"yinghai@kernel.org" <yinghai@kernel.org>,
"rajatxjain@gmail.com" <rajatxjain@gmail.com>,
"gong.chen@linux.intel.com" <gong.chen@linux.intel.com>,
David Daney <david.daney@cavium.com>
Subject: Re: [PATCH v5 0/4] PCI: Add support for PCI Enhanced Allocation "BARs"
Date: Wed, 14 Oct 2015 09:26:09 -0700 [thread overview]
Message-ID: <561E8221.7070701@caviumnetworks.com> (raw)
In-Reply-To: <20151014161731.GA3029@sean.stalley.intel.com>
On 10/14/2015 09:17 AM, Sean O. Stalley wrote:
> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com>
>
Thanks a lot Sean.
I think you cannot SOB if the patches are not flowing through you (as
may be the case for my two additions). Perhaps a Tested-by: or
Acked-by: would be more appropriate.
> I tested it out with the QEMU EA Patches here:
> [https://lists.nongnu.org/archive/html/qemu-devel/2015-07/msg00348.html]
>
> Also, I found 1 trivial typo in the commit message of PATCH 1/4:
> "Signed-off-by: Signed-off-by: David Daney <david.daney@cavium.com>"
Aargh! I need to be more careful.
In any case, what should be the next course of action?
A) I receive Tested-by/Acked-by from Sean, and resend the four patches?
B) Bjorn takes these as is, but fixes the headers as needed.
Bjorn, what do you think?
Thanks,
David Daney
>
> -Sean
>
> On Wed, Oct 07, 2015 at 06:44:52AM -0700, Stalley, Sean wrote:
>> [PATCH 3/4 & 4/4] Acked-by: Sean O. Stalley <sean.stalley@intel.com>
>>
>> I won't be able to test it out until next week, but I like how it looks :)
>>
>> Thanks Again,
>> Sean
>>
>>> -----Original Message-----
>>> From: David Daney [mailto:ddaney.cavm@gmail.com]
>>> Sent: Tuesday, October 06, 2015 4:51 PM
>>> To: linux-kernel@vger.kernel.org; linux-pci@vger.kernel.org; Bjorn Helgaas;
>>> Michael S. Tsirkin; Rafał Miłecki; linux-api@vger.kernel.org; Stalley, Sean;
>>> yinghai@kernel.org; rajatxjain@gmail.com; gong.chen@linux.intel.com
>>> Cc: David Daney
>>> Subject: [PATCH v5 0/4] PCI: Add support for PCI Enhanced Allocation
>>> "BARs"
>>>
>>> From: David Daney <david.daney@cavium.com>
>>>
>>> The original patches are from Sean O. Stalley. I made a few tweaks, but feel
>>> that it is substancially Sean's work, so I am keeping the patch set version
>>> numbering scheme going.
>>>
>>> Tested on Cavium ThunderX system with 4 Root Complexes containing 50
>>> devices/bridges provisioned with EA.
>>>
>>> Here is Sean's description of the patches:
>>>
>>> PCI Enhanced Allocation is a new method of allocating MMIO & IO
>>> resources for PCI devices & bridges. It can be used instead of the traditional
>>> PCI method of using BARs.
>>>
>>> EA entries are hardware-initialized to a fixed address.
>>> Unlike BARs, regions described by EA are cannot be moved.
>>> Because of this, only devices which are permanently connected to the PCI
>>> bus can use EA. A removable PCI card must not use EA.
>>>
>>> This patchset adds support for using EA entries instead of BARs on Root
>>> Complex Integrated Endpoints.
>>>
>>> The Enhanced Allocation ECN is publicly available here:
>>> https://www.pcisig.com/specifications/conventional/ECN_Enhanced_Alloca
>>> tion_23_Oct_2014_Final.pdf
>>>
>>>
>>> Changes from V1:
>>> - Use generic PCI resource claim functions (instead of EA-specific
>>> functions)
>>> - Only add support for RCiEPs (instead of all devices).
>>> - Removed some debugging messages leftover from early testing.
>>>
>>> Changes from V2 (By David Daney):
>>> - Add ea_cap to struct pci_device, to aid in finding the EA capability.
>>> - Factored EA entity decoding into a separate function.
>>> - Add functions to find EA entities by BEI or Property.
>>> - Add handling of EA provisioned bridges.
>>> - Add handling of EA SRIOV BARs.
>>> - Try to assign proper resource parent so that SRIOV device creation
>>> can occur.
>>>
>>> Changes from V3 (By David Daney):
>>> - Discarded V3 changes and started over fresh based on Sean's V2.
>>> - Add more support/checking for Entry Properties.
>>> - Allow EA behind bridges.
>>> - Rewrite some error messages.
>>> - Add patch 3/5 to prevent resizing, and better handle
>>> assigning, of fixed EA resources.
>>> - Add patch 4/5 to handle EA provisioned SRIOV devices.
>>> - Add patch 5/5 to handle EA provisioned bridges.
>>>
>>> Changes from V4 (By David Daney):
>>> - Drop patch 5/5 to handle EA provisioned bridges.
>>> - Drop cases for bridge resources in 2/5.
>>> - Drop unnecessary fallback resource parent handling in 3/5
>>> - Small code formatting improvements.
>>>
>>> David Daney (2):
>>> PCI: Handle IORESOURCE_PCI_FIXED when sizing and assigning resources.
>>> PCI: Handle Enhanced Allocation (EA) capability for SRIOV devices.
>>>
>>> Sean O. Stalley (2):
>>> PCI: Add Enhanced Allocation register entries
>>> PCI: Add support for Enhanced Allocation devices
>>>
>>> drivers/pci/iov.c | 11 ++-
>>> drivers/pci/pci.c | 189
>>> ++++++++++++++++++++++++++++++++++++++++++
>>> drivers/pci/pci.h | 1 +
>>> drivers/pci/probe.c | 3 +
>>> drivers/pci/setup-bus.c | 50 ++++++++++-
>>> include/uapi/linux/pci_regs.h | 44 +++++++++-
>>> 6 files changed, 292 insertions(+), 6 deletions(-)
>>>
>>> --
>>> 1.9.1
>>
next prev parent reply other threads:[~2015-10-14 16:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-06 23:50 David Daney
2015-10-06 23:50 ` [PATCH v5 1/4] PCI: Add Enhanced Allocation register entries David Daney
2015-10-20 13:12 ` Bjorn Helgaas
2015-10-06 23:50 ` [PATCH v5 2/4] PCI: Add support for Enhanced Allocation devices David Daney
2015-10-20 13:48 ` Bjorn Helgaas
2015-10-06 23:50 ` [PATCH v5 3/4] PCI: Handle IORESOURCE_PCI_FIXED when sizing and assigning resources David Daney
2015-10-20 14:04 ` Bjorn Helgaas
2015-10-06 23:50 ` [PATCH v5 4/4] PCI: Handle Enhanced Allocation (EA) capability for SRIOV devices David Daney
2015-10-07 13:44 ` [PATCH v5 0/4] PCI: Add support for PCI Enhanced Allocation "BARs" Stalley, Sean
2015-10-14 16:17 ` Sean O. Stalley
2015-10-14 16:26 ` David Daney [this message]
2015-10-15 14:06 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=561E8221.7070701@caviumnetworks.com \
--to=ddaney@caviumnetworks.com \
--cc=bhelgaas@google.com \
--cc=david.daney@cavium.com \
--cc=ddaney.cavm@gmail.com \
--cc=gong.chen@linux.intel.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mst@redhat.com \
--cc=rajatxjain@gmail.com \
--cc=sean.stalley@intel.com \
--cc=yinghai@kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome