From: "Martin J. Bligh" <mbligh@aracnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Cc: solt@dns.toxicfilms.tv
Subject: [Bug 1094] New: Unplugging USB MP3 player from causes these printouts. May be related to scsi subsytem.
Date: Wed, 13 Aug 2003 07:49:52 -0700 [thread overview]
Message-ID: <5630000.1060786192@[10.10.2.4]> (raw)
http://bugme.osdl.org/show_bug.cgi?id=1094
Summary: Unplugging USB MP3 player from causes these printouts.
May be related to scsi subsytem.
Kernel Version: 2.6.0-test3 and all the previous too
Status: NEW
Severity: normal
Owner: greg@kroah.com
Submitter: solt@dns.toxicfilms.tv
Distribution: Debian SID
Hardware Environment: UHCI Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
Software Environment: mount-2.11z, gcc-3.3.1, (on gcc-3.2.2 too)
Problem Description: After unplugging an USB MP3 player that uses scsi_mod,
sd_mod and usb-storage, the kernel prints out these:
I reported this as early as 2.5.69.
Steps to reproduce:
compile the kernel with scsi_mod, sd_mod, usb-storage (all needed to transfer
files to the usb device).
Plug in the device.
You can mount it, copy files, whatever.
Here's what you get about:
class_dev_release at drivers/base/class.c:201
and
kobject_cleanup at lib/kobject.c:402
###
hub 1-0:0: port 2, status 100, change 3, 12 Mb/s
usb 1-2: USB disconnect, address 3
drivers/usb/core/message.c: nuking URBs for device 1-2
usb 1-2: unregistering interfaces
usb-storage: storage_disconnect() called
usb-storage: usb_stor_stop_transport called
usb-storage: -- dissociate_dev
Device class '1:0:0:0' does not have a release() function, it is broken and must
be fixed.
Badness in class_dev_release at drivers/base/class.c:201
Call Trace:
[kobject_cleanup+131/133] kobject_cleanup+0x83/0x85
[class_device_unregister+19/35] class_device_unregister+0x13/0x23
[scsi_device_unregister+31/47] scsi_device_unregister+0x1f/0x2f
[scsi_remove_device+15/21] scsi_remove_device+0xf/0x15
[scsi_forget_host+25/39] scsi_forget_host+0x19/0x27
[scsi_remove_host+55/70] scsi_remove_host+0x37/0x46
[storage_disconnect+138/187] storage_disconnect+0x8a/0xbb
[usb_unbind_interface+117/119] usb_unbind_interface+0x75/0x77
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[usb_disconnect+293/367] usb_disconnect+0x125/0x16f
[hub_port_connect_change+914/919] hub_port_connect_change+0x392/0x397
[hub_events+948/1148] hub_events+0x3b4/0x47c
[hub_thread+42/214] hub_thread+0x2a/0xd6
[default_wake_function+0/46] default_wake_function+0x0/0x2e
[hub_thread+0/214] hub_thread+0x0/0xd6
[kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
kobject 'sda1' does not have a release() function, it is broken and must be
fixed.
Badness in kobject_cleanup at lib/kobject.c:402
Call Trace:
[kobject_cleanup+95/133] kobject_cleanup+0x5f/0x85
[delete_partition+109/144] delete_partition+0x6d/0x90
[del_gendisk+47/200] del_gendisk+0x2f/0xc8
[sd_remove+32/112] sd_remove+0x20/0x70
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[scsi_remove_device+15/21] scsi_remove_device+0xf/0x15
[scsi_forget_host+25/39] scsi_forget_host+0x19/0x27
[scsi_remove_host+55/70] scsi_remove_host+0x37/0x46
[storage_disconnect+138/187] storage_disconnect+0x8a/0xbb
[usb_unbind_interface+117/119] usb_unbind_interface+0x75/0x77
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[usb_disconnect+293/367] usb_disconnect+0x125/0x16f
[hub_port_connect_change+914/919] hub_port_connect_change+0x392/0x397
[hub_events+948/1148] hub_events+0x3b4/0x47c
[hub_thread+42/214] hub_thread+0x2a/0xd6
[default_wake_function+0/46] default_wake_function+0x0/0x2e
[hub_thread+0/214] hub_thread+0x0/0xd6
[kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
kobject 'iosched' does not have a release() function, it is broken and must be
fixed.
Badness in kobject_cleanup at lib/kobject.c:402
Call Trace:
[kobject_cleanup+95/133] kobject_cleanup+0x5f/0x85
[elv_unregister_queue+26/56] elv_unregister_queue+0x1a/0x38
[blk_unregister_queue+30/79] blk_unregister_queue+0x1e/0x4f
[unlink_gendisk+33/136] unlink_gendisk+0x21/0x88
[del_gendisk+92/200] del_gendisk+0x5c/0xc8
[sd_remove+32/112] sd_remove+0x20/0x70
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[scsi_remove_device+15/21] scsi_remove_device+0xf/0x15
[scsi_forget_host+25/39] scsi_forget_host+0x19/0x27
[scsi_remove_host+55/70] scsi_remove_host+0x37/0x46
[storage_disconnect+138/187] storage_disconnect+0x8a/0xbb
[usb_unbind_interface+117/119] usb_unbind_interface+0x75/0x77
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[usb_disconnect+293/367] usb_disconnect+0x125/0x16f
[hub_port_connect_change+914/919] hub_port_connect_change+0x392/0x397
[hub_events+948/1148] hub_events+0x3b4/0x47c
[hub_thread+42/214] hub_thread+0x2a/0xd6
[default_wake_function+0/46] default_wake_function+0x0/0x2e
[hub_thread+0/214] hub_thread+0x0/0xd6
[kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
kobject 'queue' does not have a release() function, it is broken and must be
fixed.
Badness in kobject_cleanup at lib/kobject.c:402
Call Trace:
[kobject_cleanup+95/133] kobject_cleanup+0x5f/0x85
[blk_unregister_queue+44/79] blk_unregister_queue+0x2c/0x4f
[unlink_gendisk+33/136] unlink_gendisk+0x21/0x88
[del_gendisk+92/200] del_gendisk+0x5c/0xc8
[sd_remove+32/112] sd_remove+0x20/0x70
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[scsi_remove_device+15/21] scsi_remove_device+0xf/0x15
[scsi_forget_host+25/39] scsi_forget_host+0x19/0x27
[scsi_remove_host+55/70] scsi_remove_host+0x37/0x46
[storage_disconnect+138/187] storage_disconnect+0x8a/0xbb
[usb_unbind_interface+117/119] usb_unbind_interface+0x75/0x77
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[usb_disconnect+293/367] usb_disconnect+0x125/0x16f
[hub_port_connect_change+914/919] hub_port_connect_change+0x392/0x397
[hub_events+948/1148] hub_events+0x3b4/0x47c
[hub_thread+42/214] hub_thread+0x2a/0xd6
[default_wake_function+0/46] default_wake_function+0x0/0x2e
[hub_thread+0/214] hub_thread+0x0/0xd6
[kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
Device class 'host1' does not have a release() function, it is broken and must
be fixed.
Badness in class_dev_release at drivers/base/class.c:201
Call Trace:
[kobject_cleanup+131/133] kobject_cleanup+0x83/0x85
[device_del+104/147] device_del+0x68/0x93
[scsi_host_put+31/47] scsi_host_put+0x1f/0x2f
[usb_stor_release_resources+249/254] usb_stor_release_resources+0xf9/0xfe
[usb_unbind_interface+117/119] usb_unbind_interface+0x75/0x77
[device_release_driver+98/100] device_release_driver+0x62/0x64
[bus_remove_device+94/165] bus_remove_device+0x5e/0xa5
[device_del+93/147] device_del+0x5d/0x93
[device_unregister+19/35] device_unregister+0x13/0x23
[usb_disconnect+293/367] usb_disconnect+0x125/0x16f
[hub_port_connect_change+914/919] hub_port_connect_change+0x392/0x397
[hub_events+948/1148] hub_events+0x3b4/0x47c
[hub_thread+42/214] hub_thread+0x2a/0xd6
[default_wake_function+0/46] default_wake_function+0x0/0x2e
[hub_thread+0/214] hub_thread+0x0/0xd6
[kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
reply other threads:[~2003-08-13 14:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='5630000.1060786192@[10.10.2.4]' \
--to=mbligh@aracnet.com \
--cc=linux-kernel@vger.kernel.org \
--cc=solt@dns.toxicfilms.tv \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®