Re: [PATCH v2 3/9] Documentation: dt-bindings: leds: add LM3633 LED binding information

["Kim, Milo" <milo.kim@ti.com>]

Hi Jacek,

On 11/30/2015 9:26 PM, Jacek Anaszewski wrote:
> In case of LM3633 the real current outputs are banks and multiplexing
> that occurs between banks and LVLEDn pins can be conveniently expressed
> with the bindings I proposed above.
>
>> >If three output channels are controlled by one control bank, then it
>> >should be represented as below.
>> >
>> >lvled-group-A {
>> >      led-sources = <0>, <1>, <2>;
>> >      led-max-microamp = <some value>;
>> >}
>> >
>> >Please let me know if I misunderstand.
> You silently assumed some definition of a "channel". led-sources means
> in fact current sources, and when device is configured so that three
> output pins are routed to the same current source, then in fact
> they share common current source.

Thanks for comments. I've modified 'led-sources' based on your feedback.
Could you check updated dt-bindings below?

* Updates
- led-sources: List of current sources from 0 to 5.
- ti,led-outputs: Output channel specifier

The 'ti,led-outputs' property is exactly matched with datasheet 
description, so it's easy to understand which current source is used for 
output channels.
---
TI LMU LM3633 LED device tree bindings

Required properties:
   - compatible: "ti,lm3633-leds"

Child nodes:
   Each node matches with LED control bank.
   Please refer to the datasheet [1].

   Required properties of a child node:
   - led-sources: List of current sources from 0 to 5.
                  0: control bank C for output LED 1
                     control bank C for output LED 1 and 2
                     control bank C for output LED 1, 2 and 3
                  1: control bank D for output LED 2
                  2: control bank E for output LED 3
                  3: control bank F for output LED 4
                     control bank F for output LED 4 and 5
                     control bank F for output LED 4, 5 and 6
                  4: control bank G for output LED 5
                  5: control bank H for output LED 6
                  Please refer to LED binding [2].

   - ti,led-outputs: Output channel specifier from 0 to 5.
                     0: LED 1
                     1: LED 2
                     2: LED 3
                     3: LED 4
                     4: LED 5
                     5: LED 6

   Optional properties of a child node:
   - label: LED channel identification. Please refer to LED binding [2].
   - led-max-microamp: Max current setting. Type is <u32>.
                       Unit is microampere. Range is from 5000 to 29800.
                       Step is 800. Please refer to LED binding [2].

Examples:

LED 1 is assigned for status LED. LED 4,5 and 6 are used for RGB 
indicator. RGB channels are controlled by bank F internally.

leds {
	compatible = "ti,lm3633-leds";

	status {
		led-sources = <0>;
		led-max-microamp = <5000>;
		ti,led-outputs = <0>;
	};

	rgb {
		led-sources = <3>;
		led-max-microamp = <6600>;
		ti,led-outputs = <3 4 5>;
	};
};

LED 2 is power LED. LED 5 is notification LED.

leds {
	compatible = "ti,lm3633-leds";

	lvled2 {
		label = "power";
		led-sources = <1>;
		led-max-microamp = <29000>;
		ti,led-outputs = <1>;
	};

	lvled5 {
		label = "noti";
		led-sources = <4>;
		led-max-microamp = <6600>;
		ti,led-outputs = <4>;
	};
};


[1] http://www.ti.com/product/LM3633/datasheet
[2] ../leds/common.txt

Best regards,
Milo