Re: [PATCH 3/3] extcon: arizona: Add DT binding examples

[Chanwoo Choi <cw00.choi@samsung.com>]

On 2015년 12월 14일 19:37, Charles Keepax wrote:
> Add an example for all elements of the Arizona extcon device tree
> binding.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  .../devicetree/bindings/extcon/extcon-arizona.txt  | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> index fd9b898..e27341f 100644
> --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> @@ -47,3 +47,29 @@ Optional properties:
>      The third cell represents the value of the micd-pol-gpio pin.
>  
>    - wlf,gpsw : Settings for the general purpose switch
> +
> +Example:
> +
> +codec: wm8280@0 {
> +	compatible = "wlf,wm8280";
> +	reg = <0>;
> +	...
> +
> +	wlf,use-jd2;
> +	wlf,use-jd2-nopull;
> +	wlf,jd-invert;
> +
> +	wlf,micd-software-compare;
> +	wlf,micd-detect-debounce = <0>;
> +	wlf,micd-pol-gpio = <&codec 2 0>;
> +	wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
> +	wlf,micd-dbtime = <4>;
> +	wlf,micd-timeout-ms = <100>;
> +	wlf,micd-force-micbias;
> +	wlf,micd-configs = <
> +		0 1 0 /* MICDET1 MICBIAS1 GPIO=low */
> +		1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
> +	>;
> +
> +	wlf,gpsw = <0>;
> +};
> 

Looks good to me. Applied it.

Thanks,
Chanwoo Choi