From: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
To: Steven Rostedt <rostedt@goodmis.org>,
"Qiu, PeiyangX" <peiyangx.qiu@intel.com>
Cc: linux-kernel@vger.kernel.org, mingo@redhat.com,
Rusty Russell <rusty@rustcorp.com.au>
Subject: Re: [PATCH] ftrace: fix race between ftrace and insmod
Date: Tue, 15 Dec 2015 11:26:41 +0800 [thread overview]
Message-ID: <566F8871.7070408@linux.intel.com> (raw)
In-Reply-To: <566F675C.9000904@linux.intel.com>
On 2015/12/15 9:05, Zhang, Yanmin wrote:
> On 2015/12/14 23:51, Steven Rostedt wrote:
>> On Mon, 14 Dec 2015 11:16:18 +0800
>> "Qiu, PeiyangX" <peiyangx.qiu@intel.com> wrote:
>>
>>> We hit ftrace_bug report when booting Android on a 64bit ATOM SOC chip.
>>> Basically, there is a race between insmod and ftrace_run_update_code.
>>>
>>> After load_module=>ftrace_module_init, another thread jumps in to call
>>> ftrace_run_update_code=>ftrace_arch_code_modify_prepare
>>> =>set_all_modules_text_rw, to change all modules
>>> as RW. Since the new module is at MODULE_STATE_UNFORMED, the text attribute
>>> is not changed. Then, the 2nd thread goes ahead to change codes.
>>> However, load_module continues to call
>>> complete_formation=>set_section_ro_nx,
>>> then 2nd thread would fail when probing the module's TEXT.
>>>
>>> Below patch tries to resolve it.
>>>
>>> commit a949ae560a511fe4e3adf48fa44fefded93e5c2b
>>> Author: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
>>> Date: Thu Apr 24 10:40:12 2014 -0400
>>>
>>> ftrace/module: Hardcode ftrace_module_init() call into load_module()
>>>
>>> But it can't fully resolve the issue.
>>>
>>> THis patch holds ftrace_mutex across ftrace_module_init and
>>> complete_formation.
>>>
>>> Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
>>> Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
>> First, this patch has major whitespace damage. All tabs are now spaces!
> This seems very hackish, although I can't think of a better way at the
> moment. But I would like not to add more code into module.c if
> possible, and just use a notifier unless there's a real reason we can't
> (as there was when we added the hook in the first place).
> We would double-check it again. It's not a good idea to change common
> module codes.
I double-checked it. If using notifier, we have to add 2 new module notification
events in enum module_state.
For example, MODULE_STATE_INITING, MODULE_STATE_INITING_FAILED.
At MODULE_STATE_INITING, call ftrace_module_init(mod);
At MODULE_STATE_INITING_FAILED, call ftrace_release_mod (or similar function);
At MODULE_STATE_COMING, call a new function which links the new start_pg
to ftrace_pages.
Such design can also fix another bug in current kernel that ftrace start_pg
of the module is not cleaned up if complete_formation fails.
However, we change module common codes. The new events only serve ftrace.
If not holding ftrace_mutex across start_pg setup and complete_formation,
some other variables are not protected well, such like ftrace_pages,
ftrace_start_up, and so on.
Yanmin
next prev parent reply other threads:[~2015-12-15 3:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <S1751824AbbLNCkP/20151214024015Z+230@vger.kernel.org>
2015-12-14 2:59 ` Qiu, PeiyangX
2015-12-14 3:16 ` Qiu, PeiyangX
2015-12-14 15:51 ` Steven Rostedt
2015-12-15 1:05 ` Zhang, Yanmin
2015-12-15 3:26 ` Zhang, Yanmin [this message]
2015-12-15 17:37 ` Steven Rostedt
2015-12-16 0:54 ` Zhang, Yanmin
2015-12-16 10:28 ` Zhang, Yanmin
2015-12-16 14:28 ` Steven Rostedt
2015-12-17 6:48 ` Zhang, Yanmin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=566F8871.7070408@linux.intel.com \
--to=yanmin_zhang@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peiyangx.qiu@intel.com \
--cc=rostedt@goodmis.org \
--cc=rusty@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome