From: Marek Szyprowski <m.szyprowski@samsung.com>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
architt@codeaurora.org, inki.dae@samsung.com,
thierry.reding@gmail.com, hjc@rock-chips.com,
seanpaul@chromium.org, airlied@linux.ie, tfiga@chromium.org,
heiko@sntech.de
Cc: hshi@chromium.org, wzz@rock-chips.com, hl@rock-chips.com,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
dianders@chromium.org, linux-rockchip@lists.infradead.org,
orjan.eide@arm.com
Subject: Re: [PATCH v4 00/38] DRM Rockchip rk3399 (Kevin)
Date: Tue, 06 Mar 2018 11:15:52 +0100 [thread overview]
Message-ID: <568969f3-0b93-05ef-953d-af1eebdac87e@samsung.com> (raw)
In-Reply-To: <20180305222324.5872-1-enric.balletbo@collabora.com>
Hi Enric,
On 2018-03-05 23:22, Enric Balletbo i Serra wrote:
> Hi,
>
> This patchset includes cleanups, improvements, and bug fixes for
> Rockchip DRM driver and PSR support.
>
> This new version is the same as before but rebased on top of
> drm-misc-next plus the Marek patches that fixes Chromebook2 Peach-Pit [1]
> and the latest series of Rockchip rk3399 eDP support [2].
>
> [1] https://www.spinics.net/lists/dri-devel/msg167804.html
> [2] https://www.spinics.net/lists/dri-devel/msg167770.html
Thanks for v4 of this patchset.
After fixing the issue pointed in the patch 15/38, everything works fine on
Exynos5250-based Chromebook Snow and Exynos5420-based Chromebook2 Peach-Pit
boards. You can add my:
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Regards,
> Enric
>
> Changes in v4:
> - Rebased all on top of drm-misc-next
> - Removed the following patches as are already applied.
> [PATCH v3 01/43] drm/rockchip: Get rid of unnecessary struct fields
> [PATCH v3 02/43] drm/rockchip: support prime import sg table
> [PATCH v3 03/43] drm/rockchip: Respect page offset for PRIME mmap
> calls
> - Removed the following patches as now are part of another patchset
> [PATCH v3 05/43] drm/bridge: analogix_dp: Don't power bridge in
> analogix_dp_bind
> [PATCH v3 33/43] drm/panel: simple: Change mode for Sharp lq123p1jx31
>
> Changes in v3:
> - Addressed some of the comments from Sean on the v2
>
> Changes in v2:
> - A few patches have been replaced by newer and cleaner versions from
> the ChromeOS kernel gerrit, especially about disallowing PSR for the
> whole atomic commit.
>
>
> Douglas Anderson (4):
> drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner
> drm/bridge: analogix_dp: Properly log AUX CH errors
> drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip
> drm/bridge: analogix_dp: Split the platform-specific poweron in two
> parts
>
> Kristian H. Kristensen (1):
> drm/rockchip: Disable PSR on input events
>
> Lin Huang (6):
> drm/bridge: analogix_dp: Move enable video into config_video()
> drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transfer
> drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the
> panel
> drm/bridge: analogix_dp: Extend hpd check time to 100ms
> drm/bridge: analogix_dp: Check dpcd write/read status
> drm/bridge: analogix_dp: Reset aux channel if an error occurred
>
> Mark Yao (1):
> drm/rockchip: pre dither down when output bpc is 8bit
>
> Sean Paul (2):
> drm/rockchip: Don't use atomic constructs for psr
> drm/rockchip: Remove analogix psr worker
>
> Tomasz Figa (7):
> drm/rockchip: analogix_dp: Do not call Analogix code before bind
> drm/rockchip: Cancel PSR enable work before changing the state
> drm/rockchip: psr: Avoid redundant calls to .set() callback
> drm/rockchip: psr: Sanitize semantics of allow/disallow API
> drm/rockchip: Disable PSR from reboot notifier
> drm/rockchip: Disallow PSR for the whole atomic commit
> drm/rockchip: psr: Remove flush by CRTC
>
> Yakir Yang (1):
> drm/bridge: analogix_dp: detect Sink PSR state after configuring the
> PSR
>
> zain wang (16):
> drm/bridge: analogix_dp: set psr activate/deactivate when
> enable/disable bridge
> drm/bridge: analogix_dp: Don't change psr while bridge is disabled
> drm/rockchip: add mutex vop lock
> drm/bridge: analogix_dp: add fast link train for eDP
> drm/rockchip: Only wait for panel ACK on PSR entry
> drm/bridge: analogix_dp: Don't use fast link training when panel just
> powered up
> drm/bridge: analogix_dp: Retry bridge enable when it failed
> drm/bridge: analogix_dp: Wait for HPD signal before configuring link
> drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy
> drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode
> drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip
> drm/rockchip: Restore psr->state when enable/disable psr failed
> drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll
> drm/bridge: analogix_dp: Fix timeout of video streamclk config
> drm/bridge: analogix_dp: Fix incorrect operations with register
> ANALOGIX_DP_FUNC_EN_1
> drm/bridge: analogix_dp: Move fast link training detect to set_bridge
>
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 452 ++++++++++++++++-----
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 14 +-
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 274 ++++++++-----
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 7 +
> drivers/gpu/drm/exynos/exynos_dp.c | 2 +-
> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 73 ++--
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
> drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 +-
> drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 61 ++-
> drivers/gpu/drm/rockchip/rockchip_drm_psr.c | 361 ++++++++++------
> drivers/gpu/drm/rockchip/rockchip_drm_psr.h | 7 +-
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 47 ++-
> drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 +
> drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
> include/drm/bridge/analogix_dp.h | 5 +-
> 15 files changed, 915 insertions(+), 395 deletions(-)
>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
next prev parent reply other threads:[~2018-03-06 10:16 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20180305222337epcas3p22a4f5c32c5622d89f6e649b26c0a6043@epcas3p2.samsung.com>
2018-03-05 22:22 ` Enric Balletbo i Serra
2018-03-05 22:22 ` [PATCH v4 01/38] drm/bridge: analogix_dp: set psr activate/deactivate when enable/disable bridge Enric Balletbo i Serra
2018-03-08 22:44 ` Heiko Stuebner
2018-03-05 22:22 ` [PATCH v4 02/38] drm/rockchip: Don't use atomic constructs for psr Enric Balletbo i Serra
2018-03-08 22:44 ` Heiko Stuebner
2018-03-05 22:22 ` [PATCH v4 03/38] drm/bridge: analogix_dp: detect Sink PSR state after configuring the PSR Enric Balletbo i Serra
2018-03-08 22:53 ` Heiko Stuebner
2018-03-05 22:22 ` [PATCH v4 04/38] drm/rockchip: Remove analogix psr worker Enric Balletbo i Serra
2018-03-05 22:22 ` [PATCH v4 05/38] drm/bridge: analogix_dp: Don't change psr while bridge is disabled Enric Balletbo i Serra
2018-03-05 22:22 ` [PATCH v4 06/38] drm/rockchip: add mutex vop lock Enric Balletbo i Serra
2018-03-05 22:22 ` [PATCH v4 07/38] drm/bridge: analogix_dp: add fast link train for eDP Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 08/38] drm/rockchip: Only wait for panel ACK on PSR entry Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 09/38] drm/bridge: analogix_dp: Move enable video into config_video() Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 10/38] drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transfer Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 11/38] drm/bridge: analogix_dp: Don't use fast link training when panel just powered up Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 12/38] drm/bridge: analogix_dp: Retry bridge enable when it failed Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 13/38] drm/bridge: analogix_dp: Wait for HPD signal before configuring link Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 14/38] drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 15/38] drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panel Enric Balletbo i Serra
2018-03-06 7:35 ` Marek Szyprowski
2018-03-06 8:49 ` Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 16/38] drm/bridge: analogix_dp: Extend hpd check time to 100ms Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 17/38] drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 18/38] drm/bridge: analogix_dp: Check dpcd write/read status Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 19/38] drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 20/38] drm/bridge: analogix_dp: Reset aux channel if an error occurred Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 21/38] drm/rockchip: Restore psr->state when enable/disable psr failed Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 22/38] drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 23/38] drm/bridge: analogix_dp: Fix timeout of video streamclk config Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 24/38] drm/bridge: analogix_dp: Fix incorrect operations with register ANALOGIX_DP_FUNC_EN_1 Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 25/38] drm/bridge: analogix_dp: Move fast link training detect to set_bridge Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 26/38] drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 27/38] drm/bridge: analogix_dp: Properly log AUX CH errors Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 28/38] drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 29/38] drm/rockchip: pre dither down when output bpc is 8bit Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 30/38] drm/bridge: analogix_dp: Split the platform-specific poweron in two parts Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 31/38] drm/rockchip: analogix_dp: Do not call Analogix code before bind Enric Balletbo i Serra
2018-03-05 22:23 ` [PATCH v4 32/38] drm/rockchip: Disable PSR on input events Enric Balletbo i Serra
2018-03-06 10:15 ` Marek Szyprowski [this message]
2018-03-05 22:12 [PATCH v4 00/38] DRM Rockchip rk3399 (Kevin) Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=568969f3-0b93-05ef-953d-af1eebdac87e@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=airlied@linux.ie \
--cc=architt@codeaurora.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=enric.balletbo@collabora.com \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=hl@rock-chips.com \
--cc=hshi@chromium.org \
--cc=inki.dae@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=orjan.eide@arm.com \
--cc=seanpaul@chromium.org \
--cc=tfiga@chromium.org \
--cc=thierry.reding@gmail.com \
--cc=wzz@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®