From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
To: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Cc: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Russell King <linux@arm.linux.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH] ARM: dts: imx6qdl-udoo: add sound support
Date: Sun, 31 Jan 2016 00:42:35 +0100 [thread overview]
Message-ID: <56AD4A6B.80409@maciej.szmigiero.name> (raw)
Add sound support in UDOO board DT file.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
---
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 57 +++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 1211da894ee9..d3e54e40a017 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -34,6 +34,18 @@
gpio = <&gpio7 12 0>;
};
};
+
+ sound {
+ compatible = "fsl,imx6q-udoo-ac97",
+ "fsl,imx-audio-ac97";
+ model = "fsl,imx6q-udoo-ac97";
+ audio-cpu = <&ssi1>;
+ audio-routing =
+ "RX", "Mic Jack",
+ "Headphone Jack", "TX";
+ mux-int-port = <1>;
+ mux-ext-port = <6>;
+ };
};
&fec {
@@ -109,6 +121,36 @@
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
+
+ pinctrl_ac97_running: ac97running {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0
+ MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0
+ MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0
+ MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_ac97_warm_reset: ac97warmreset {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0
+ MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0
+ MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0
+ MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_ac97_reset: ac97reset {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
+ MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0
+ MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0
+ MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ >;
+ };
};
};
@@ -132,3 +174,18 @@
non-removable;
status = "okay";
};
+
+&audmux {
+ status = "okay";
+};
+
+&ssi1 {
+ cell-index = <0>;
+ fsl,mode = "ac97-slave";
+ pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+ pinctrl-0 = <&pinctrl_ac97_running>;
+ pinctrl-1 = <&pinctrl_ac97_reset>;
+ pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+ ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+ status = "okay";
+};
next reply other threads:[~2016-01-30 23:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-30 23:42 Maciej S. Szmigiero [this message]
2016-02-02 8:11 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56AD4A6B.80409@maciej.szmigiero.name \
--to=mail@maciej.szmigiero.name \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®