From: Javier Martinez Canillas <javier@osg.samsung.com>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
Linus Walleij <linus.walleij@linaro.org>,
Pau Pajuel <ppajuel@gmail.com>
Subject: Re: [PATCH 4/4] ARM: dts: am335x-sl50: Fix audio codec setup.
Date: Tue, 2 Feb 2016 16:07:01 -0300 [thread overview]
Message-ID: <56B0FE55.3060102@osg.samsung.com> (raw)
In-Reply-To: <1452941473-6349-5-git-send-email-enric.balletbo@collabora.com>
Hello Enric,
On 01/16/2016 07:51 AM, Enric Balletbo i Serra wrote:
> The MCLK is provided by an external clock of 24.576MHz.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> arch/arm/boot/dts/am335x-sl50.dts | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
> index 9e1dac6..a676869 100644
> --- a/arch/arm/boot/dts/am335x-sl50.dts
> +++ b/arch/arm/boot/dts/am335x-sl50.dts
> @@ -67,12 +67,28 @@
> default-brightness-level = <6>;
> };
>
> + clocks {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* audio external oscillator */
> + tlv320aic3x_mclk: oscillator@0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24576000>; /* 24.576MHz */
> + };
> + };
> +
> sound {
> compatible = "ti,da830-evm-audio";
> ti,model = "AM335x-SL50";
> ti,audio-codec = <&audio_codec>;
> ti,mcasp-controller = <&mcasp0>;
> - ti,codec-clock-rate = <12000000>;
> +
> + clocks = <&tlv320aic3x_mclk>;
> + clock-names = "mclk";
> +
> ti,audio-routing =
> "Headphone Jack", "HPLOUT",
> "Headphone Jack", "HPROUT",
> @@ -230,7 +246,7 @@
> AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
> AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
> AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
> - AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
> + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
Please also mention this change in the commit message.
> >;
> };
>
>
after the updated commit message:
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
prev parent reply other threads:[~2016-02-02 19:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-16 10:51 [PATCH 0/4] ARM: dts: igep00x0 and sl50 board fixes Enric Balletbo i Serra
2016-01-16 10:51 ` [PATCH 1/4] ARM: dts: igep00x0: Specify the device to be used for boot console output Enric Balletbo i Serra
2016-02-02 19:02 ` Javier Martinez Canillas
2016-02-12 21:58 ` Tony Lindgren
2016-01-16 10:51 ` [PATCH 2/4] ARM: dts: omap3-igep0030-common: Add USB Host support Enric Balletbo i Serra
2016-02-02 19:03 ` Javier Martinez Canillas
2016-01-16 10:51 ` [PATCH 3/4] ARM: dts: am335x-sl50: Specify the device to be used for boot console output Enric Balletbo i Serra
2016-02-02 19:04 ` Javier Martinez Canillas
2016-01-16 10:51 ` [PATCH 4/4] ARM: dts: am335x-sl50: Fix audio codec setup Enric Balletbo i Serra
2016-02-02 19:07 ` Javier Martinez Canillas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B0FE55.3060102@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=enric.balletbo@collabora.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=ppajuel@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®