On 2/9/2016 9:23 AM, Will Deacon wrote:
> On Tue, Feb 09, 2016 at 09:17:12AM -0800, Shi, Yang wrote:
>> On 2/9/2016 8:54 AM, Will Deacon wrote:
>>> On Mon, Feb 08, 2016 at 09:13:09AM -0800, Yang Shi wrote:
>>>> When boot arm64 kernel with KASAN enabled, the below error is reported by
>>>> kasan:
>>>>
>>>> BUG: KASAN: out-of-bounds in unwind_frame+0xec/0x260 at addr ffffffc064d57ba0
>>>> Read of size 8 by task pidof/499
>>>> page:ffffffbdc39355c0 count:0 mapcount:0 mapping:          (null) index:0x0
>>>> flags: 0x0()
>>>> page dumped because: kasan: bad access detected
>>>> CPU: 2 PID: 499 Comm: pidof Not tainted 4.5.0-rc1 #119
>>>> Hardware name: Freescale Layerscape 2085a RDB Board (DT)
>>>> Call trace:
>>>> [<ffffffc00008d078>] dump_backtrace+0x0/0x290
>>>> [<ffffffc00008d32c>] show_stack+0x24/0x30
>>>> [<ffffffc0006a981c>] dump_stack+0x8c/0xd8
>>>> [<ffffffc0002e4400>] kasan_report_error+0x558/0x588
>>>> [<ffffffc0002e4958>] kasan_report+0x60/0x70
>>>> [<ffffffc0002e3188>] __asan_load8+0x60/0x78
>>>> [<ffffffc00008c92c>] unwind_frame+0xec/0x260
>>>> [<ffffffc000087e60>] get_wchan+0x110/0x160
>>>> [<ffffffc0003b647c>] do_task_stat+0xb44/0xb68
>>>> [<ffffffc0003b7730>] proc_tgid_stat+0x40/0x50
>>>> [<ffffffc0003ac840>] proc_single_show+0x88/0xd8
>>>> [<ffffffc000345be8>] seq_read+0x370/0x770
>>>> [<ffffffc00030aba0>] __vfs_read+0xc8/0x1d8
>>>> [<ffffffc00030c0ec>] vfs_read+0x94/0x168
>>>> [<ffffffc00030d458>] SyS_read+0xb8/0x128
>>>> [<ffffffc000086530>] el0_svc_naked+0x24/0x28
>>>> Memory state around the buggy address:
>>>>   ffffffc064d57a80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 f4 f4
>>>>   ffffffc064d57b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> ffffffc064d57b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>                                    ^
>>>>   ffffffc064d57c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>   ffffffc064d57c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>
>>>> Since the shadow byte pointed by the report is 0, so it may mean it is just hit
>>>> oob in non-current task. So, disable the instrumentation to silence these
>>>> warnings.
>>>
>>> Curious, but how did you trigger this? I'm just trying to confirm that
>>> mainline is affected, but my machine boots happily with KASAN and STACKTRACE
>>> selected and I can cat /proc/self/{stack,stat} quite happily.
>>>
>>> What am I missing?
>>
>> I'm using mainline 4.5-rc1 kernel with gcc 5.2. And, my rootfs is NFS
>> mounted.
>>
>> Not sure if other kernel configs, i.e tracing stuff will have impact on the
>> trigger since I'm not using the defconfig.
>
> If you could put your .config somewhere, that would be helpful, please.

Attached it. BTW, I run the test on LS2085a RDB board which has 8 A57 
cores. Not sure if it could be reproduced on other boards easily.

Yang

>
> Will
>