From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
David Airlie <airlied@linux.ie>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/2] drm/panel: simple: Add URT UMSH-8596MD-xT panels support
Date: Sat, 13 Feb 2016 22:52:03 +0100 [thread overview]
Message-ID: <56BFA583.4040902@maciej.szmigiero.name> (raw)
In-Reply-To: <20151008082444.GC3820@ulmo>
Add support for United Radiant Technology UMSH-8596MD-xT
7.0" WVGA TFT LCD panels in DRM panel-simple driver.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
---
This replaces "drm: panel-simple: implement URT UMSH-8596MD-xT panel support"
submission.
drivers/gpu/drm/panel/panel-simple.c | 54 ++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f88a631c43ab..6530c1ffca2c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1176,6 +1176,42 @@ static const struct panel_desc shelly_sca07010_bfn_lnn = {
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
+static const struct display_timing urt_umsh_8596md_timing = {
+ .pixelclock = { 33260000, 33260000, 33260000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 41, 41, 41 },
+ .hback_porch = { 216 - 128, 216 - 128, 216 - 128 },
+ .hsync_len = { 71, 128, 128 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 10, 10, 10 },
+ .vback_porch = { 35 - 2, 35 - 2, 35 - 2 },
+ .vsync_len = { 2, 2, 2 },
+ .flags = DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE |
+ DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
+};
+
+static const struct panel_desc urt_umsh_8596md_lvds = {
+ .timings = &urt_umsh_8596md_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+};
+
+static const struct panel_desc urt_umsh_8596md_parallel = {
+ .timings = &urt_umsh_8596md_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
static const struct of_device_id platform_of_match[] = {
{
.compatible = "ampire,am800480r3tmqwa1h",
@@ -1280,6 +1316,24 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
}, {
+ .compatible = "urt,umsh-8596md-t",
+ .data = &urt_umsh_8596md_parallel,
+ }, {
+ .compatible = "urt,umsh-8596md-1t",
+ .data = &urt_umsh_8596md_parallel,
+ }, {
+ .compatible = "urt,umsh-8596md-7t",
+ .data = &urt_umsh_8596md_parallel,
+ }, {
+ .compatible = "urt,umsh-8596md-11t",
+ .data = &urt_umsh_8596md_lvds,
+ }, {
+ .compatible = "urt,umsh-8596md-19t",
+ .data = &urt_umsh_8596md_lvds,
+ }, {
+ .compatible = "urt,umsh-8596md-20t",
+ .data = &urt_umsh_8596md_parallel,
+ }, {
/* sentinel */
}
};
next prev parent reply other threads:[~2016-02-13 21:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 21:02 [PATCH 3/3] drm: panel-simple: implement URT UMSH-8596MD-xT panel support Maciej S. Szmigiero
2015-10-08 8:24 ` Thierry Reding
2015-11-24 21:04 ` Maciej S. Szmigiero
2016-02-13 21:46 ` Maciej S. Szmigiero
2016-02-13 21:50 ` [PATCH 1/2] dt-bindings: Add URT UMSH-8596MD-xT panel bindings Maciej S. Szmigiero
2016-02-22 2:54 ` Rob Herring
2016-03-02 15:22 ` Maciej S. Szmigiero
2016-03-02 16:17 ` Thierry Reding
2016-02-13 21:52 ` Maciej S. Szmigiero [this message]
2016-03-02 16:17 ` [PATCH 2/2] drm/panel: simple: Add URT UMSH-8596MD-xT panels support Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BFA583.4040902@maciej.szmigiero.name \
--to=mail@maciej.szmigiero.name \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®