From: Vlastimil Babka <vbabka@suse.cz>
To: Mel Gorman <mgorman@techsingularity.net>,
Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Andrea Arcangeli <aarcange@redhat.com>,
Linux-MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/1] mm: thp: Set THP defrag by default to madvise and add a stall-free defrag option
Date: Tue, 1 Mar 2016 13:42:06 +0100 [thread overview]
Message-ID: <56D58E1E.5090708@suse.cz> (raw)
In-Reply-To: <1456503359-4910-1-git-send-email-mgorman@techsingularity.net>
On 02/26/2016 05:15 PM, Mel Gorman wrote:
> Changelog since v1
> o Default defrag to madvise instead of never
> o Introduce "defer" defrag option to wake kswapd/kcompact if THP is unavailable
> o Restore "always" to historical behaviour
> o Update documentation
>
> THP defrag is enabled by default to direct reclaim/compact but not wake
> kswapd in the event of a THP allocation failure. The problem is that THP
> allocation requests potentially enter reclaim/compaction. This potentially
> incurs a severe stall that is not guaranteed to be offset by reduced TLB
> misses. While there has been considerable effort to reduce the impact
> of reclaim/compaction, it is still a high cost and workloads that should
> fit in memory fail to do so. Specifically, a simple anon/file streaming
> workload will enter direct reclaim on NUMA at least even though the working
> set size is 80% of RAM. It's been years and it's time to throw in the towel.
>
> First, this patch defines THP defrag as follows;
>
> madvise: A failed allocation will direct reclaim/compact if the application requests it
> never: Neither reclaim/compact nor wake kswapd
> defer: A failed allocation will wake kswapd/kcompactd
> always: A failed allocation will direct reclaim/compact (historical behaviour)
> khugepaged defrag will enter direct/reclaim but not wake kswapd.
>
> Next it sets the default defrag option to be "madvise" to only enter direct
> reclaim/compaction for applications that specifically requested it.
>
> Lastly, it removes a check from the page allocator slowpath that is related
> to __GFP_THISNODE to allow "defer" to work. The callers that really cares are
> slub/slab and they are updated accordingly. The slab one may be surprising
> because it also corrects a comment as kswapd was never woken up by that path.
It would be also nice if we could remove the is_thp_gfp_mask() checks one day.
They try to make direct reclaim/compaction for THP less intrusive, but maybe
could be removed now that the stalls are limited otherwise. But that's out of
scope here.
[...]
> diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt
> index 8a282687ee06..a19b173cbc57 100644
> --- a/Documentation/vm/transhuge.txt
> +++ b/Documentation/vm/transhuge.txt
> @@ -113,9 +113,26 @@ guaranteed, but it may be more likely in case the allocation is for a
> MADV_HUGEPAGE region.
>
> echo always >/sys/kernel/mm/transparent_hugepage/defrag
> +echo defer >/sys/kernel/mm/transparent_hugepage/defrag
> echo madvise >/sys/kernel/mm/transparent_hugepage/defrag
> echo never >/sys/kernel/mm/transparent_hugepage/defrag
>
> +"always" means that an application requesting THP will stall on allocation
> +failure and directly reclaim pages and compact memory in an effort to
> +allocate a THP immediately. This may be desirable for virtual machines
> +that benefit heavily from THP use and are willing to delay the VM start
> +to utilise them.
> +
> +"defer" means that an application will wake kswapd in the background
> +to reclaim pages and wake kcompact to compact memory so that THP is
> +available in the near future. It's the responsibility of khugepaged
> +to then install the THP pages later.
> +
> +"madvise" will enter direct reclaim like "always" but only for regions
> +that are have used madvise(). This is the default behaviour.
"madvise(MADV_HUGEPAGE)" perhaps?
[...]
> @@ -277,17 +273,23 @@ static ssize_t double_flag_store(struct kobject *kobj,
> static ssize_t enabled_show(struct kobject *kobj,
> struct kobj_attribute *attr, char *buf)
> {
> - return double_flag_show(kobj, attr, buf,
> - TRANSPARENT_HUGEPAGE_FLAG,
> - TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG);
> + if (test_bit(TRANSPARENT_HUGEPAGE_FLAG, &transparent_hugepage_flags)) {
> + VM_BUG_ON(test_bit(TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG, &transparent_hugepage_flags));
> + return sprintf(buf, "[always] madvise never\n");
> + } else if (test_bit(TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG, &transparent_hugepage_flags))
> + return sprintf(buf, "always [madvise] never\n");
> + else
> + return sprintf(buf, "always madvise [never]\n");
Somewhat ugly wrt consistent usage of { }, due to the VM_BUG_ON(), which I would
just drop. Also I wonder if some racy read vs write of the file can trigger the
BUG_ON? Or are the kobject accesses synchronized at a higher level?
> }
> +
> static ssize_t enabled_store(struct kobject *kobj,
> struct kobj_attribute *attr,
> const char *buf, size_t count)
> {
> ssize_t ret;
>
> - ret = double_flag_store(kobj, attr, buf, count,
> + ret = triple_flag_store(kobj, attr, buf, count,
> + TRANSPARENT_HUGEPAGE_FLAG,
> TRANSPARENT_HUGEPAGE_FLAG,
> TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG);
So this makes "echo defer > enabled" behave just like "echo always"? For
userspace interface that becomes a fixed ABI, I would prefer to be more careful
with unintended aliases like this. Maybe pass something like "-1" that
triple_flag_store() would check in the "defer" case and return -EINVAL?
> @@ -345,16 +347,23 @@ static ssize_t single_flag_store(struct kobject *kobj,
> static ssize_t defrag_show(struct kobject *kobj,
> struct kobj_attribute *attr, char *buf)
> {
> - return double_flag_show(kobj, attr, buf,
> - TRANSPARENT_HUGEPAGE_DEFRAG_FLAG,
> - TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG);
> + if (test_bit(TRANSPARENT_HUGEPAGE_DEFRAG_DIRECT_FLAG, &transparent_hugepage_flags))
> + return sprintf(buf, "[always] defer madvise never\n");
> + if (test_bit(TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_FLAG, &transparent_hugepage_flags))
> + return sprintf(buf, "always [defer] madvise never\n");
> + else if (test_bit(TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG, &transparent_hugepage_flags))
> + return sprintf(buf, "always defer [madvise] never\n");
> + else
> + return sprintf(buf, "always defer madvise [never]\n");
> +
> }
> static ssize_t defrag_store(struct kobject *kobj,
> struct kobj_attribute *attr,
> const char *buf, size_t count)
> {
> - return double_flag_store(kobj, attr, buf, count,
> - TRANSPARENT_HUGEPAGE_DEFRAG_FLAG,
> + return triple_flag_store(kobj, attr, buf, count,
> + TRANSPARENT_HUGEPAGE_DEFRAG_DIRECT_FLAG,
> + TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_FLAG,
> TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG);
> }
> static struct kobj_attribute defrag_attr =
> @@ -784,9 +793,30 @@ static int __do_huge_pmd_anonymous_page(struct mm_struct *mm,
> return 0;
> }
>
> -static inline gfp_t alloc_hugepage_gfpmask(int defrag, gfp_t extra_gfp)
> +/*
> + * If THP is set to always then directly reclaim/compact as necessary
> + * If set to defer then do no reclaim and defer to khugepaged
> + * If set to madvise and the VMA is flagged then directly reclaim/compact
> + */
> +static inline gfp_t alloc_hugepage_direct_gfpmask(struct vm_area_struct *vma)
> +{
> + gfp_t reclaim_flags = 0;
> +
> + if (test_bit(TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG, &transparent_hugepage_flags) &&
> + (vma->vm_flags & VM_HUGEPAGE))
> + reclaim_flags = __GFP_DIRECT_RECLAIM;
> + else if (test_bit(TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_FLAG, &transparent_hugepage_flags))
> + reclaim_flags = __GFP_KSWAPD_RECLAIM;
> + else if (test_bit(TRANSPARENT_HUGEPAGE_DEFRAG_DIRECT_FLAG, &transparent_hugepage_flags))
> + reclaim_flags = __GFP_DIRECT_RECLAIM;
Hmm, here's a trick question. What if I wanted direct reclaim for madvise()
vma's and kswapd/kcompactd for others? Right now there's no such option, right?
And expressing that with different values for a single tunable becomes ugly...
(For completeness, somebody could want kswapd/kcompactd defrag only for
madvise() but that's arguably not much useful)
next prev parent reply other threads:[~2016-03-01 12:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 16:15 Mel Gorman
2016-03-01 12:42 ` Vlastimil Babka [this message]
2016-03-01 13:31 ` Mel Gorman
2016-03-01 13:36 ` Vlastimil Babka
2016-03-01 13:44 ` [PATCH] mm: thp: Set THP defrag by default to madvise and add a stall-free defrag option -fix Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D58E1E.5090708@suse.cz \
--to=vbabka@suse.cz \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome