From: Udo van den Heuvel <udovdh@xs4all.nl>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: 4.4.3 issue: Hisax driver no longer loading
Date: Wed, 2 Mar 2016 15:43:05 +0100 [thread overview]
Message-ID: <56D6FBF9.2090805@xs4all.nl> (raw)
Hello,
On 3.18.11 the card was functioning OK.
On 4.4.3 I get:
1.894086] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
[ 1.894198] HiSax: W6692 driver Rev. 1.18.2.4
[ 1.894364] Found: Dynalink/AsusCom IS64PH, I/O base: 0xd000, irq: 6
[ 1.894490] HiSax: IS64PH config irq:6 I/O:d000
[ 1.894611] W6692: Winbond W6692 version (0): W6692 V00
[ 1.894865] W6692 ISTA=0x0
[ 1.894967] W6692 IMASK=0xFF
[ 1.895070] W6692 D_EXIR=0x0
[ 1.895173] W6692 D_EXIM=0xFF
[ 1.895277] W6692 D_RSTA=0xA0
[ 1.895384] Winbond 6692: IRQ 6 count 0
[ 1.897842] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 1.932040] Winbond 6692: IRQ 6 count 0
[ 1.932149] Winbond 6692: IRQ(6) getting no interrupts during init 1
[ 1.984031] Winbond 6692: IRQ 6 count 0
[ 1.984139] Winbond 6692: IRQ(6) getting no interrupts during init 2
[ 2.034988] ata1.00: ATA-8: Hitachi HDS721050CLA360, JP2OA50E, max
UDMA/133
[ 2.035111] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.048185] Winbond 6692: IRQ 6 count 0
[ 2.048292] Winbond 6692: IRQ(6) getting no interrupts during init 3
[ 2.048592] HiSax: Card Winbond 6692 not installed !
I reserved some IRQs in the BIOS of the box but different IRQ does not
solve the issue.
Cold boot doesn't help either.
Any workarounds?
Kind regards,
Udo
next reply other threads:[~2016-03-02 15:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 14:43 Udo van den Heuvel [this message]
2016-03-02 15:30 ` Udo van den Heuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D6FBF9.2090805@xs4all.nl \
--to=udovdh@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®