From: Luka Gejak <luka.gejak@linux.dev>
To: Ho Jie Feng <hjf3108@gmail.com>, Ping-Ke Shih <pkshih@realtek.com>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
Bitterblue Smith <rtl8821cerfe2@gmail.com>
Subject: Re: [PATCH rtw-next v4 1/7] wifi: rtw88: 8812a, 8814a: enable STBC for HT transmissions
Date: Sun, 15 Nov 2026 14:35:41 +0100 [thread overview]
Message-ID: <56FC313D-ADEF-48B2-BBF5-A4DFAC129C3A@linux.dev> (raw)
In-Reply-To: <20261115114336.1739863-2-hjf3108@gmail.com>
Hi Jie Feng,
Thanks for the update. Two comments below.
On November 15, 2026 12:43:27 PM GMT+01:00, Ho Jie Feng <hjf3108@gmail.com>
wrote:
> 8812a and 8814a support STBC, enable it.
Could you mention here that this enables HT TX STBC on these chips? As
far as I can see, VHT TX STBC was already advertised when more than one RF
path is available, so that would make the scope clearer.
[ ... ]
> Tested on RTL8812AU, STBC packets were captured in monitor mode.
Were these HT transmissions from the RTL8812AU, for example on 2.4 GHz
or with an HT only AP? As far as I can see, we already advertise VHT TX
STBC on this chip, so a VHT capture would not confirm the change here.
Best regards,
Luka Gejak
next prev parent reply other threads:[~2026-11-15 13:35 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 11:43 [PATCH rtw-next v4 0/7] wifi: rtw88: extend 88xxA support Ho Jie Feng
2026-11-15 11:43 ` [PATCH rtw-next v4 1/7] wifi: rtw88: 8812a, 8814a: enable STBC for HT transmissions Ho Jie Feng
2026-11-15 13:35 ` Luka Gejak [this message]
2026-11-15 11:43 ` [PATCH rtw-next v4 2/7] wifi: rtw88: skip the dynamic CSI rate without a cfg_csi_rate op Ho Jie Feng
2026-11-15 11:43 ` [PATCH rtw-next v4 3/7] wifi: rtw88: correctly expose beamformee capabilities Ho Jie Feng
2026-11-15 13:20 ` Luka Gejak
2026-11-15 13:36 ` Luka Gejak
2026-11-15 13:37 ` Luka Gejak
2026-11-15 13:39 ` Luka Gejak
2026-11-15 11:43 ` [PATCH rtw-next v4 4/7] wifi: rtw88: 88xxa: receive VHT SU beamformed transmissions Ho Jie Feng
2026-11-15 11:43 ` [PATCH rtw-next v4 5/7] wifi: rtw88: prepare frequency-offset correction for more chips Ho Jie Feng
2026-11-15 13:41 ` Luka Gejak
2026-11-15 11:43 ` [PATCH rtw-next v4 6/7] wifi: rtw88: 88xxa: correct carrier-frequency offset Ho Jie Feng
2026-11-15 13:20 ` Luka Gejak
2026-11-15 13:42 ` Luka Gejak
2026-11-15 11:43 ` [PATCH rtw-next v4 7/7] wifi: rtw88: 8812a, 8821a: respect peer A-MPDU size limits Ho Jie Feng
2026-11-15 13:43 ` Luka Gejak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56FC313D-ADEF-48B2-BBF5-A4DFAC129C3A@linux.dev \
--to=luka.gejak@linux.dev \
--cc=hjf3108@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=rtl8821cerfe2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®