[PATCH v6 4/4] iommu/amd: Skip enabling command/event buffers for kdump

[Ashish Kalra <Ashish.Kalra@amd.com>]

From: Ashish Kalra <ashish.kalra@amd.com>

After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.

IOMMU command buffers and event buffer registers remain locked and
exclusive to the previous kernel. Attempts to enable command and event
buffers in the kdump kernel will fail, as hardware ignores writes to
the locked MMIO registers as per AMD IOMMU spec Section 2.12.2.1.

Skip enabling command buffers and event buffers for kdump boot as they
are already enabled in the previous kernel.

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
---
 drivers/iommu/amd/init.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index dac6282675da..d179344ad598 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -821,11 +821,16 @@ static void iommu_enable_command_buffer(struct amd_iommu *iommu)
 
 	BUG_ON(iommu->cmd_buf == NULL);
 
-	entry = iommu_virt_to_phys(iommu->cmd_buf);
-	entry |= MMIO_CMD_SIZE_512;
-
-	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
-		    &entry, sizeof(entry));
+	if (!is_kdump_kernel()) {
+		/*
+		 * Command buffer is re-used for kdump kernel and setting
+		 * of MMIO register is not required.
+		 */
+		entry = iommu_virt_to_phys(iommu->cmd_buf);
+		entry |= MMIO_CMD_SIZE_512;
+		memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
+			    &entry, sizeof(entry));
+	}
 
 	amd_iommu_reset_cmd_buffer(iommu);
 }
@@ -876,10 +881,15 @@ static void iommu_enable_event_buffer(struct amd_iommu *iommu)
 
 	BUG_ON(iommu->evt_buf == NULL);
 
-	entry = iommu_virt_to_phys(iommu->evt_buf) | EVT_LEN_MASK;
-
-	memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET,
-		    &entry, sizeof(entry));
+	if (!is_kdump_kernel()) {
+		/*
+		 * Event buffer is re-used for kdump kernel and setting
+		 * of MMIO register is not required.
+		 */
+		entry = iommu_virt_to_phys(iommu->evt_buf) | EVT_LEN_MASK;
+		memcpy_toio(iommu->mmio_base + MMIO_EVT_BUF_OFFSET,
+			    &entry, sizeof(entry));
+	}
 
 	/* set head and tail to zero manually */
 	writel(0x00, iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
-- 
2.34.1