From: Ezequiel Garcia <ezequiel@collabora.com>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
linux-kernel@vger.kernel.org
Cc: Nick Crews <ncrews@chromium.org>,
Guenter Roeck <groeck@chromium.org>,
kernel@collabora.com, Duncan Laurie <dlaurie@google.com>,
Benson Leung <bleung@chromium.org>, Arnd Bergmann <arnd@arndb.de>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [PATCH] platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime
Date: Mon, 03 Jun 2019 17:56:18 -0300 [thread overview]
Message-ID: <57649a3c8809b3dd0abbd2955aea46f06f881d96.camel@collabora.com> (raw)
In-Reply-To: <20190530171120.31590-1-enric.balletbo@collabora.com>
Hi Enric,
On Thu, 2019-05-30 at 19:11 +0200, Enric Balletbo i Serra wrote:
> On many boards, communication between the kernel and the Embedded
> Controller happens over an LPC bus. In these cases, the kernel config
> CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
> Microchip Embedded Controller (MEC) that is different from the regular
> EC. On these devices, the same LPC bus is used, but the protocol is
> a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
> config is enabled. Currently, the kernel decides at compile-time whether
> or not to use the MEC variant, and, when that kernel option is selected
> it breaks the other boards. We would like a kind of runtime detection to
> avoid this.
>
> This patch adds that detection mechanism by probing the protocol at
> runtime, first we assume that a MEC variant is connected, and if the
> protocol fails it fallbacks to the regular EC. This adds a bit of
> overload because we try to read twice on those LPC boards that doesn't
> contain a MEC variant, but is a better solution than having to select the
> EC variant at compile-time.
>
> While here also fix the alignment in Kconfig file for this config option
> replacing the spaces by tabs.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Hi,
>
> This is the first attempt to solve the issue to be able to select at
> runtime the CrOS MEC variant. My first thought was check for a device ID,
> the MEC1322 has a register that contains the device ID, however I am not
> sure if we can read that register from the host without modifying the
> firmware. Also, I am not sure if the MEC1322 is the only device used
> that supports that LPC protocol variant, so I ended with a more easy
> solution, check if the protocol fails or not. Some background on this
> issue can be found [1] and [2]
>
> The patch has been tested on:
> - Acer Chromebook R11 (Cyan - MEC variant)
> - Pixel Chromebook 2015 (Samus - non-MEC variant)
> - Dell Chromebook 11 (Wolf - non-MEC variant)
> - Toshiba Chromebook (Leon - non-MEC variant)
>
> Nick, could you test the patch for Wilco?
>
> Best regards,
> Enric
>
> [1] https://bugs.chromium.org/p/chromium/issues/detail?id=932626
> [2] https://chromium-review.googlesource.com/c/chromiumos/overlays/chromiumos-overlay/+/1474254
>
> drivers/platform/chrome/Kconfig | 29 +++++-----------
> drivers/platform/chrome/Makefile | 3 +-
> drivers/platform/chrome/cros_ec_lpc.c | 15 ++++++--
> drivers/platform/chrome/cros_ec_lpc_reg.c | 42 +++++++++--------------
> drivers/platform/chrome/cros_ec_lpc_reg.h | 3 ++
> drivers/platform/chrome/wilco_ec/Kconfig | 2 +-
> 6 files changed, 43 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> index 2826f7136f65..453e69733842 100644
> --- a/drivers/platform/chrome/Kconfig
> +++ b/drivers/platform/chrome/Kconfig
> @@ -83,28 +83,17 @@ config CROS_EC_SPI
> 'pre-amble' bytes before the response actually starts.
>
> config CROS_EC_LPC
> - tristate "ChromeOS Embedded Controller (LPC)"
> - depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> - help
> - If you say Y here, you get support for talking to the ChromeOS EC
> - over an LPC bus. This uses a simple byte-level protocol with a
> - checksum. This is used for userspace access only. The kernel
> - typically has its own communication methods.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called cros_ec_lpc.
> -
> -config CROS_EC_LPC_MEC
> - bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
> - depends on CROS_EC_LPC
> - default n
> + tristate "ChromeOS Embedded Controller (LPC)"
> + depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> help
> - If you say Y here, a variant LPC protocol for the Microchip EC
> - will be used. Note that this variant is not backward compatible
> - with non-Microchip ECs.
> + If you say Y here, you get support for talking to the ChromeOS EC
> + over an LPC bus, including the LPC Microchip EC (MEC) variant.
> + This uses a simple byte-level protocol with a checksum. This is
> + used for userspace access only. The kernel typically has its own
> + communication methods.
>
> - If you have a ChromeOS Embedded Controller Microchip EC variant
> - choose Y here.
> + To compile this driver as a module, choose M here: the
> + module will be called cros_ec_lpcs.
>
> config CROS_EC_PROTO
> bool
> diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> index 1b2f1dcfcd5c..d6416411888f 100644
> --- a/drivers/platform/chrome/Makefile
> +++ b/drivers/platform/chrome/Makefile
> @@ -9,8 +9,7 @@ obj-$(CONFIG_CHROMEOS_TBMC) += chromeos_tbmc.o
> obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
> obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
> obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
> -cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o
> -cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> +cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o cros_ec_lpc_mec.o
> obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
> obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o cros_ec_trace.o
> obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o
> diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> index c9c240fbe7c6..2cbc71c8edba 100644
> --- a/drivers/platform/chrome/cros_ec_lpc.c
> +++ b/drivers/platform/chrome/cros_ec_lpc.c
> @@ -248,10 +248,21 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
> return -EBUSY;
> }
>
> + /*
> + * Read the mapped ID twice, the first one is assuming the
> + * EC is a Microchip Embedded Controller (MEC) variant, if the
> + * protocol fails, fallback to the non MEC variant and try to
> + * read again the ID.
> + */
> cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
> if (buf[0] != 'E' || buf[1] != 'C') {
> - dev_err(dev, "EC ID not detected\n");
> - return -ENODEV;
> + cros_ec_is_microchip = false;
> + cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID,
> + 2, buf);
> + if (buf[0] != 'E' || buf[1] != 'C') {
> + dev_err(dev, "EC ID not detected\n");
> + return -ENODEV;
> + }
> }
>
> if (!devm_request_region(dev, EC_HOST_CMD_REGION0,
> diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> index 0f5cd0ac8b49..953580ac207e 100644
> --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> @@ -9,6 +9,12 @@
>
> #include "cros_ec_lpc_mec.h"
>
> +/*
> + * Assume that the Embedded Controller is the Microhcip variant, we will
> + * mark as false if that's not the case.
> + */
> +bool cros_ec_is_microchip = true;
> +
I'm reluctant to add global state to the kernel, specially when it's something
that's not per-kernel but rather a property of the cros ec device.
Maybe this can be represented with a priv data inside a union:
struct cros_ec_lpc_hw {
u8 (*read_bytes)(unsigned int offset, unsigned int length, u8 *dest);
...
};
struct cros_ec_device {
...
union {
struct cros_ec_lpc_hw lpc_priv;
}
};
You can then detect the protocol at probe time, and assign the I/O
hooks (read_bytes, etc).
Should work the same way, but with a different design.
Thanks,
Eze
prev parent reply other threads:[~2019-06-03 22:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-30 17:11 Enric Balletbo i Serra
2019-06-03 20:56 ` Ezequiel Garcia [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57649a3c8809b3dd0abbd2955aea46f06f881d96.camel@collabora.com \
--to=ezequiel@collabora.com \
--cc=arnd@arndb.de \
--cc=bleung@chromium.org \
--cc=dlaurie@google.com \
--cc=enric.balletbo@collabora.com \
--cc=gregkh@linuxfoundation.org \
--cc=groeck@chromium.org \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ncrews@chromium.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®