mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paolo Abeni <pabeni@redhat.com>
To: ChunHao Lin <hau@realtek.com>, hkallweit1@gmail.com
Cc: nic_swsd@realtek.com, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH net v2 1/2] r8169: add handling DASH when DASH is disabled
Date: Thu, 09 Nov 2023 12:49:41 +0100	[thread overview]
Message-ID: <5783a6f8819a741f0f299602ff615e6a03368246.camel@redhat.com> (raw)
In-Reply-To: <20231108184849.2925-2-hau@realtek.com>

On Thu, 2023-11-09 at 02:48 +0800, ChunHao Lin wrote:
> For devices that support DASH, even DASH is disabled, there may still
> exist a default firmware that will influence device behavior.
> So driver needs to handle DASH for devices that support DASH, no
> matter the DASH status is.
> 
> This patch also prepare for "fix DASH deviceis network lost issue".
> 
> Signed-off-by: ChunHao Lin <hau@realtek.com>

You should include the fixes tag you already added in v1 and your Sob
should come as the last tag

The same applies to the next patch 

> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>

It's not clear where/when Heiner provided the above tag for this patch.
I hope that was off-list.

> Cc: stable@vger.kernel.org
> ---
>  drivers/net/ethernet/realtek/r8169_main.c | 35 ++++++++++++++++-------
>  1 file changed, 25 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 0c76c162b8a9..108dc75050ba 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -624,6 +624,7 @@ struct rtl8169_private {
>  
>  	unsigned supports_gmii:1;
>  	unsigned aspm_manageable:1;
> +	unsigned dash_enabled:1;
>  	dma_addr_t counters_phys_addr;
>  	struct rtl8169_counters *counters;
>  	struct rtl8169_tc_offsets tc_offset;
> @@ -1253,14 +1254,26 @@ static bool r8168ep_check_dash(struct rtl8169_private *tp)
>  	return r8168ep_ocp_read(tp, 0x128) & BIT(0);
>  }
>  
> -static enum rtl_dash_type rtl_check_dash(struct rtl8169_private *tp)
> +static bool rtl_dash_is_enabled(struct rtl8169_private *tp)
> +{
> +	switch (tp->dash_type) {
> +	case RTL_DASH_DP:
> +		return r8168dp_check_dash(tp);
> +	case RTL_DASH_EP:
> +		return r8168ep_check_dash(tp);
> +	default:
> +		return false;
> +	}
> +}
> +
> +static enum rtl_dash_type rtl_get_dash_type(struct rtl8169_private *tp)
>  {
>  	switch (tp->mac_version) {
>  	case RTL_GIGA_MAC_VER_28:
>  	case RTL_GIGA_MAC_VER_31:
> -		return r8168dp_check_dash(tp) ? RTL_DASH_DP : RTL_DASH_NONE;
> +		return RTL_DASH_DP;
>  	case RTL_GIGA_MAC_VER_51 ... RTL_GIGA_MAC_VER_53:
> -		return r8168ep_check_dash(tp) ? RTL_DASH_EP : RTL_DASH_NONE;
> +		return RTL_DASH_EP;
>  	default:
>  		return RTL_DASH_NONE;
>  	}
> @@ -1453,7 +1466,7 @@ static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts)
>  
>  	device_set_wakeup_enable(tp_to_dev(tp), wolopts);
>  
> -	if (tp->dash_type == RTL_DASH_NONE) {
> +	if (!tp->dash_enabled) {
>  		rtl_set_d3_pll_down(tp, !wolopts);
>  		tp->dev->wol_enabled = wolopts ? 1 : 0;
>  	}
> @@ -2512,7 +2525,7 @@ static void rtl_wol_enable_rx(struct rtl8169_private *tp)
>  
>  static void rtl_prepare_power_down(struct rtl8169_private *tp)
>  {
> -	if (tp->dash_type != RTL_DASH_NONE)
> +	if (tp->dash_enabled)
>  		return;
>  
>  	if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
> @@ -4869,7 +4882,7 @@ static int rtl8169_runtime_idle(struct device *device)
>  {
>  	struct rtl8169_private *tp = dev_get_drvdata(device);
>  
> -	if (tp->dash_type != RTL_DASH_NONE)
> +	if (tp->dash_enabled)
>  		return -EBUSY;
>  
>  	if (!netif_running(tp->dev) || !netif_carrier_ok(tp->dev))
> @@ -4896,7 +4909,7 @@ static void rtl_shutdown(struct pci_dev *pdev)
>  	rtl_rar_set(tp, tp->dev->perm_addr);
>  
>  	if (system_state == SYSTEM_POWER_OFF &&
> -	    tp->dash_type == RTL_DASH_NONE) {
> +		!tp->dash_enabled) {

Since you have to repost, please maintain the correct indentation
above:

	if (system_state == SYSTEM_POWER_OFF &&
	    !tp->dash_enabled) {

        ^^^^
spaces here.


Cheers,

Paolo


  reply	other threads:[~2023-11-09 11:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-08 18:48 [PATCH net v2 0/2] r8169: fix DASH devices network lost issue ChunHao Lin
2023-11-08 18:48 ` [PATCH net v2 1/2] r8169: add handling DASH when DASH is disabled ChunHao Lin
2023-11-09 11:49   ` Paolo Abeni [this message]
2023-11-09 16:20     ` Hau
2023-11-09 16:37     ` Heiner Kallweit
2023-11-08 18:48 ` [PATCH net v2 2/2] r8169: fix network lost after resume on DASH systems ChunHao Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5783a6f8819a741f0f299602ff615e6a03368246.camel@redhat.com \
    --to=pabeni@redhat.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hau@realtek.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®