Re: [PATCH] iio: adc: nxp-sar-adc: notify trigger on channel read error in buffer ISR

[David Lechner <dlechner@baylibre.com>]

On 5/17/26 11:23 AM, Stepan Ionichev wrote:
> nxp_sar_adc_isr_buffer() bails on the first channel-read failure
> without calling iio_trigger_notify_done(), so a single I/O error
> leaves the trigger's use_count stuck and the buffer flow wedged
> until rebind.
> 
> Route the error exit through a 'done:' label that always calls
> iio_trigger_notify_done().
> 
> Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
> Cc: stable@vger.kernel.org
> Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
> ---
>  drivers/iio/adc/nxp-sar-adc.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/nxp-sar-adc.c b/drivers/iio/adc/nxp-sar-adc.c
> index 9d9f2c76b..ed004812c 100644
> --- a/drivers/iio/adc/nxp-sar-adc.c
> +++ b/drivers/iio/adc/nxp-sar-adc.c
> @@ -341,7 +341,7 @@ static void nxp_sar_adc_isr_buffer(struct iio_dev *indio_dev)
>  		ret = nxp_sar_adc_read_data(info, info->buffered_chan[i]);
>  		if (ret < 0) {
>  			nxp_sar_adc_read_notify(info);
> -			return;
> +			goto done;
>  		}
>  
>  		info->buffer[i] = ret;
> @@ -352,6 +352,7 @@ static void nxp_sar_adc_isr_buffer(struct iio_dev *indio_dev)
>  	iio_push_to_buffers_with_ts(indio_dev, info->buffer, sizeof(info->buffer),
>  				    iio_get_time_ns(indio_dev));
>  
> +done:
>  	iio_trigger_notify_done(indio_dev->trig);
>  }
>  

This is fine. Although we are already duplicating the call to
nxp_sar_adc_read_notify(). So could be OK to just call
iio_trigger_notify_done() and return too. Let's see if anyone
else has an opinion.