Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host

[Jon Hunter <jonathanh@nvidia.com>]

On 08/11/16 08:54, Peter De Schrijver wrote:
> On Mon, Nov 07, 2016 at 02:09:31PM +0000, Jon Hunter wrote:
>>
>> On 07/11/16 13:28, Thierry Reding wrote:
>>> * PGP Signed by an unknown key
>>>
>>> On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote:
>>>> Nyan boards only have host USB ports (2 external, 1 internal), there is
>>>> no OTG-enabled connector.
>>>>
>>>> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
>>>> ---
>>>>  arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +-
>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> Where is this information coming from? I don't have one of the Nyans
>>> myself, but one of the Tegra132 devices I have, which I think was
>>> derived from one of the Nyans uses one of the external host ports as
>>> forced recovery port, for which it would need OTG.
>>>
>>> I suspect that the way to get U-Boot onto the Nyans is via tegrarcm?
>>> In that case I think one of the ports must be OTG.
>>
>> It is true that the port on the back on the nyan-big can be used with
>> recovery mode. I was thinking that this is not a true OTG port as it is
>> just a 4-pin type A socket and does not have an ID pin. Thinking some
>> more about this the USB spec does include a "Host Negotiation Protocol
>> (HNP)" that allows a host and device to swap roles and so keeping it as
>> OTG seems valid afterall.
> 
> I don't think the bootrom implements that though. I expect recovery mode
> to just program the controller in device mode, without performing any
> negotiation.

I am not talking about the bootrom and I would not expect the bootrom to
do that. However, the kernel could.

Cheers
Jon

-- 
nvpublic