From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-kernel@vger.kernel.org, Greg KH <greg@kroah.com>
Subject: Re: ide: MODALIAS support for autoloading of ide-cd, ide-disk, ...
Date: Mon, 5 Dec 2005 09:24:28 +0100 [thread overview]
Message-ID: <58cb370e0512050024s647fdc5eg8d0c2e60dd7867dd@mail.gmail.com> (raw)
In-Reply-To: <20051203172418.GA12297@vrfy.org>
Hi,
Looks fine but what about ide-scsi driver and ide_optical media?
Bartlomiej
On 12/3/05, Kay Sievers <kay.sievers@vrfy.org> wrote:
> This applies on top of the changes currently in the -mm tree, which
> rename ".hotplug" to ".uevent". I don't have any IDE hardware left
> around here, so I've tested it only with a PCMCIA CF adapter. :)
>
> Thanks,
> Kay
>
>
>
> From: Kay Sievers <kay.sievers@suse.de>
>
> IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ...
>
> Add MODULE_ALIAS to IDE midlayer modules to autoload them depending
> on the probed media type.
>
> $ modinfo ide-disk
> filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko
> description: ATA DISK Driver
> alias: ide:*m-disk*
> license: GPL
> ...
>
> $ modprobe -vn ide:m-disk
> insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko
>
> $ cat /sys/bus/ide/devices/0.0/modalias
> ide:m-disk
>
> It also adds attributes to the IDE device:
> $ tree /sys/bus/ide/devices/0.0/
> /sys/bus/ide/devices/0.0/
> |-- bus -> ../../../../../../../bus/ide
> |-- drivename
> |-- media
> |-- modalias
> |-- power
> | |-- state
> | `-- wakeup
> `-- uevent
>
> $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media}
> ide:m-disk
> hda
> disk
>
> Signed-off-by: Kay Sievers <kay.sievers@suse.de>
> ---
> diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
> index 9455e42..24e3e64 100644
> --- a/drivers/ide/ide-cd.c
> +++ b/drivers/ide/ide-cd.c
> @@ -3516,6 +3516,7 @@ static int __init ide_cdrom_init(void)
> return driver_register(&ide_cdrom_driver.gen_driver);
> }
>
> +MODULE_ALIAS("ide:*m-cdrom*");
> module_init(ide_cdrom_init);
> module_exit(ide_cdrom_exit);
> MODULE_LICENSE("GPL");
> diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
> index f4e3d35..06fb261 100644
> --- a/drivers/ide/ide-disk.c
> +++ b/drivers/ide/ide-disk.c
> @@ -1271,6 +1271,7 @@ static int __init idedisk_init(void)
> return driver_register(&idedisk_driver.gen_driver);
> }
>
> +MODULE_ALIAS("ide:*m-disk*");
> module_init(idedisk_init);
> module_exit(idedisk_exit);
> MODULE_LICENSE("GPL");
> diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
> index 9e293c8..fba3fff 100644
> --- a/drivers/ide/ide-floppy.c
> +++ b/drivers/ide/ide-floppy.c
> @@ -2197,6 +2197,7 @@ static int __init idefloppy_init(void)
> return driver_register(&idefloppy_driver.gen_driver);
> }
>
> +MODULE_ALIAS("ide:*m-floppy*");
> module_init(idefloppy_init);
> module_exit(idefloppy_exit);
> MODULE_LICENSE("GPL");
> diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
> diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
> index 7d7944e..a621548 100644
> --- a/drivers/ide/ide-tape.c
> +++ b/drivers/ide/ide-tape.c
> @@ -4947,6 +4947,7 @@ out:
> return error;
> }
>
> +MODULE_ALIAS("ide:*m-tape*");
> module_init(idetape_init);
> module_exit(idetape_exit);
> MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
> diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
> index 8af179b..96d39a1 100644
> --- a/drivers/ide/ide.c
> +++ b/drivers/ide/ide.c
> @@ -1904,9 +1904,73 @@ static int ide_bus_match(struct device *
> return 1;
> }
>
> +static char *media_string(ide_drive_t *drive)
> +{
> + switch (drive->media) {
> + case ide_disk:
> + return "disk";
> + case ide_cdrom:
> + return "cdrom";
> + case ide_tape:
> + return "tape";
> + case ide_floppy:
> + return "floppy";
> + default:
> + return "UNKNOWN";
> + }
> +}
> +
> +static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + ide_drive_t *drive = dev->driver_data;
> + return sprintf(buf, "%s\n", media_string(drive));
> +}
> +
> +static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + ide_drive_t *drive = dev->driver_data;
> + return sprintf(buf, "%s\n", drive->name);
> +}
> +
> +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + ide_drive_t *drive = dev->driver_data;
> + return sprintf(buf, "ide:m-%s\n", media_string(drive));
> +}
> +
> +static struct device_attribute ide_dev_attrs[] = {
> + __ATTR_RO(media),
> + __ATTR_RO(drivename),
> + __ATTR_RO(modalias),
> + __ATTR_NULL
> +};
> +
> +static int ide_uevent(struct device *dev, char **envp, int num_envp,
> + char *buffer, int buffer_size)
> +{
> + ide_drive_t *drive = dev->driver_data;
> + int i = 0;
> + int length = 0;
> +
> + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
> + "MEDIA=%s", media_string(drive));
> +
> + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
> + "DRIVENAME=%s", drive->name);
> +
> + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
> + "MODALIAS=ide:m-%s",
> + media_string(drive));
> +
> + envp[i] = NULL;
> + return 0;
> +}
> +
> struct bus_type ide_bus_type = {
> .name = "ide",
> .match = ide_bus_match,
> + .uevent = ide_uevent,
> + .dev_attrs = ide_dev_attrs,
> .suspend = generic_ide_suspend,
> .resume = generic_ide_resume,
> };
next prev parent reply other threads:[~2005-12-05 8:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-03 17:24 Kay Sievers
2005-12-05 8:24 ` Bartlomiej Zolnierkiewicz [this message]
2005-12-05 18:28 ` Marco d'Itri
2005-12-05 23:18 ` Bartlomiej Zolnierkiewicz
2005-12-05 23:33 ` Kay Sievers
2005-12-05 23:36 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58cb370e0512050024s647fdc5eg8d0c2e60dd7867dd@mail.gmail.com \
--to=bzolnier@gmail.com \
--cc=greg@kroah.com \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®