mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
To: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>,
	"andres@anarazel.de" <andres@anarazel.de>
Cc: "Zhang, Rui" <rui.zhang@intel.com>,
	"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] thermal: intel_pch_thermal: Add PCI ids for Lewisburg PCH.
Date: Sat, 14 Nov 2020 18:41:23 +0000	[thread overview]
Message-ID: <58f71764994d5f2ea5dda231605cfe046c3050c8.camel@intel.com> (raw)
In-Reply-To: <20201113204916.1144907-1-andres@anarazel.de>

On Fri, 2020-11-13 at 12:49 -0800, Andres Freund wrote:
> I noticed that I couldn't read the PCH temperature on my workstation
> (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to
> go
> through IPMI. Looking at the data sheet, it looks to me like the
> existing intel PCH thermal driver should work without changes for
> Lewisburg.
> 
> I suspect there's some other PCI IDs missing. But I hope somebody at
> Intel would have an easier time figuring that out than I...
> 
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> Cc: Tushar Dave <tushar.n.dave@intel.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Link: 
> https://lore.kernel.org/lkml/20200115184415.1726953-1-andres@anarazel.de/
> Signed-off-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>

> ---
>  drivers/thermal/intel/intel_pch_thermal.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/intel/intel_pch_thermal.c
> b/drivers/thermal/intel/intel_pch_thermal.c
> index 3b813ebb6ca1..7785e05f46f0 100644
> --- a/drivers/thermal/intel/intel_pch_thermal.c
> +++ b/drivers/thermal/intel/intel_pch_thermal.c
> @@ -26,6 +26,7 @@
>  #define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
>  #define PCH_THERMAL_DID_CNL_LP	0x02F9 /* CNL-LP PCH */
>  #define PCH_THERMAL_DID_CML_H	0X06F9 /* CML-H PCH */
> +#define PCH_THERMAL_DID_LWB	0xA1B1 /* Lewisburg PCH */
>  
>  /* Wildcat Point-LP  PCH Thermal registers */
>  #define WPT_TEMP	0x0000	/* Temperature */
> @@ -276,6 +277,7 @@ enum board_ids {
>  	board_skl,
>  	board_cnl,
>  	board_cml,
> +	board_lwb,
>  };
>  
>  static const struct board_info {
> @@ -301,7 +303,11 @@ static const struct board_info {
>  	[board_cml] = {
>  		.name = "pch_cometlake",
>  		.ops = &pch_dev_ops_wpt,
> -	}
> +	},
> +	[board_lwb] = {
> +		.name = "pch_lewisburg",
> +		.ops = &pch_dev_ops_wpt,
> +	},
>  };
>  
>  static int intel_pch_thermal_probe(struct pci_dev *pdev,
> @@ -415,6 +421,8 @@ static const struct pci_device_id
> intel_pch_thermal_id[] = {
>  		.driver_data = board_cnl, },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
>  		.driver_data = board_cml, },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB),
> +		.driver_data = board_lwb, },
>  	{ 0, },
>  };
>  MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);

  reply	other threads:[~2020-11-14 18:41 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-15 18:44 Andres Freund
2020-01-16  8:08 ` Daniel Lezcano
2020-01-16 13:53 ` Srinivas Pandruvada
2020-01-16 18:42   ` Andres Freund
2020-01-16 19:41     ` Srinivas Pandruvada
2020-10-28 20:21       ` Andres Freund
2020-11-12 11:29         ` Daniel Lezcano
2020-11-12 11:34         ` Daniel Lezcano
2020-11-13 20:49           ` Andres Freund
2020-11-14 18:41             ` Pandruvada, Srinivas [this message]
2020-11-16  9:28             ` Daniel Lezcano
2020-11-21  0:46               ` Andres Freund
2020-11-24  9:36             ` [thermal: thermal/next] " thermal-bot for Andres Freund
2020-11-13 20:50           ` [PATCH] " Andres Freund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58f71764994d5f2ea5dda231605cfe046c3050c8.camel@intel.com \
    --to=srinivas.pandruvada@intel.com \
    --cc=andres@anarazel.de \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®