Re: [PATCH v5 2/3] ARM: dts: aspeed: Add Intel AVCRP BMC

[Dawid Glazik <dawid.glazik@linux.intel.com>]

On 11/10/2026 6:53 AM, Andrew Jeffery wrote:
> On Mon, 2026-11-09 at 18:41 +0100, Dawid Glazik wrote:
>> AVCRP is an Intel x86 server platform equipped with an ASPEED
>> AST2600 BMC. The BMC is used for out-of-band management, platform
>> monitoring, and system control.
> 
> It's probably my fault to some degree for not providing a better
> explanation of what I was after on v4, and for merging changes from
> others in the past that were pretty lax on the description, but what I
> was hoping for was something more like e.g:
> 
> - f28674fab34f ("ARM: dts: aspeed: Add NVIDIA MSX4 HPM"), or
> - bc83b7353d2b ("ARM: dts: aspeed: Add Facebook Anacapa platform")
> 
> Are there more details you can provide? If there are, I'm fine if you
> reply here with them, and if there are no further concerns I can update
> the commit message while applying the patches.
> 
> This also applies to the JNCRP patch that follows.
> 
> Andrew

Hi Andrew,

Thanks, that helps. I also found one more issue in v5 (uart-routing 
issue), so I'll send a v6 with the fuller descriptions below
instead of having you edit them. Please hold off applying v5.

AVCRP is an Intel x86 server platform. The BMC is an ASPEED 
AST2600-based RunBMC module on the platform's DC-SCM. It supports the 
platform's out-of-band management and exposes board management I/O such 
as the system UARTs, status LEDs and control buttons, while integrating 
with the host's telemetry and management infrastructure.

JNCRP is an Intel x86 server platform managed by an ASPEED AST2600 BMC.
The BMC is the platform management controller for the host system and 
supports platform power and reset control, while participating in 
out-of-band monitoring and reporting for host faults during bring-up and 
normal operation.

Does this shape work for you?

Best regards,
Dawid