mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jijie Shao <shaojijie@huawei.com>
To: David Yang <mmyangfl@gmail.com>, <netdev@vger.kernel.org>
Cc: <shaojijie@huawei.com>, Jian Shen <shenjian15@huawei.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Nicolai Buchwitz <nb@tipi-net.de>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Stanislav Fomichev <sdf@fomichev.me>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net 01/10] net: hisilicon: hisi_femac: Move setting of netops to fix crash
Date: Thu, 8 Oct 2026 19:51:59 +0800	[thread overview]
Message-ID: <59b7118e-0bd9-4638-9a1f-a9b36eccff15@huawei.com> (raw)
In-Reply-To: <20261008022656.3592191-2-mmyangfl@gmail.com>


on 2026/10/8 10:26, David Yang wrote:
> hisi_femac_drv_probe() connects the PHY before dev->netdev_ops is
> assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
> dev->netdev_ops through netdev_need_ops_lock() since the commit in
> question, so probing crashes with a NULL pointer dereference when
> CONFIG_NET_SHAPER is enabled.
>
>    phy_link_topo_add_phy from phy_attach_direct+0xec/0x37c
>    of_phy_get_and_connect from hisi_femac_drv_probe+0x1f4/0x558
>    Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
> Assign netdev_ops before the PHY attach, as was done for emac in commit
> 7c9f391ec89c ("net: emac: move setting of netops to fix crash").
>
> Fixes: ded86da4bbb7 ("net: ethtool: relax ethnl_req_get_phydev() locking assertion")
> Signed-off-by: David Yang <mmyangfl@gmail.com>

Reviewed-by: Jijie Shao <shaojijie@huawei.com>

If possible, modify this file as well. I have observed similar issues on the hibmcge driver recently:
drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c

There are similar issues:
The driver assigns netdev_ops after hbg_init(), but hbg_init() calls
hbg_mdio_init() -> hbg_phy_connect() -> phy_connect_direct() ->
phy_attach_direct() -> phy_link_topo_add_phy(), which invokes
netdev_need_ops_lock(). With CONFIG_NET_SHAPER enabled, this function
dereferences dev->netdev_ops->net_shaper_ops. Since netdev_ops is still
NULL at this point, a NULL pointer dereference occurs.

Move the netdev_ops assignment before hbg_init() so that
netdev_need_ops_lock() can safely access netdev_ops during PHY
attachment.

Thanks,
Jijie Shao

> ---
>   drivers/net/ethernet/hisilicon/hisi_femac.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/hisilicon/hisi_femac.c b/drivers/net/ethernet/hisilicon/hisi_femac.c
> index d244a40df430..016605e86f0b 100644
> --- a/drivers/net/ethernet/hisilicon/hisi_femac.c
> +++ b/drivers/net/ethernet/hisilicon/hisi_femac.c
> @@ -830,6 +830,8 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
>   		hisi_femac_phy_reset(priv);
>   	}
>   
> +	ndev->netdev_ops = &hisi_femac_netdev_ops;
> +
>   	phy = of_phy_get_and_connect(ndev, node, hisi_femac_adjust_link);
>   	if (!phy) {
>   		dev_err(dev, "connect to PHY failed!\n");
> @@ -850,7 +852,6 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
>   
>   	ndev->watchdog_timeo = 6 * HZ;
>   	ndev->priv_flags |= IFF_UNICAST_FLT;
> -	ndev->netdev_ops = &hisi_femac_netdev_ops;
>   	ndev->ethtool_ops = &hisi_femac_ethtools_ops;
>   	netif_napi_add_weight(ndev, &priv->napi, hisi_femac_poll,
>   			      FEMAC_POLL_WEIGHT);

  reply	other threads:[~2026-10-08 11:52 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08  2:26 [PATCH net 00/10] net: " David Yang
2026-10-08  2:26 ` [PATCH net 01/10] net: hisilicon: hisi_femac: " David Yang
2026-10-08 11:51   ` Jijie Shao [this message]
2026-10-08  2:26 ` [PATCH net 02/10] net: hisilicon: hip04_eth: " David Yang
2026-10-08  8:30   ` Maxime Chevallier
2026-10-08  2:26 ` [PATCH net 03/10] net: ethernet: actions: " David Yang
2026-10-08  2:26 ` [PATCH net 04/10] net: ethernet: adi: " David Yang
2026-10-08  2:26 ` [PATCH net 05/10] net: mv643xx: move " David Yang
2026-10-08  2:26 ` [PATCH net 06/10] net: au1000: " David Yang
2026-10-08  8:31   ` Maxime Chevallier
2026-10-08  2:26 ` [PATCH net 07/10] net: ethoc: " David Yang
2026-10-08  2:26 ` [PATCH net 08/10] net: ethernet: aeroflex: " David Yang
2026-10-08  2:26 ` [PATCH net 09/10] net: ti: icssm-prueth: Move " David Yang
2026-10-08  2:26 ` [PATCH net 10/10] microchip: lan865x: move " David Yang
2026-10-08  8:32   ` Maxime Chevallier
2026-10-08 12:10 ` [PATCH net 00/10] net: Move " Jijie Shao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=59b7118e-0bd9-4638-9a1f-a9b36eccff15@huawei.com \
    --to=shaojijie@huawei.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mmyangfl@gmail.com \
    --cc=nb@tipi-net.de \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@fomichev.me \
    --cc=shenjian15@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®