From: Chanwoo Choi <cw00.choi@samsung.com>
To: Hans de Goede <hdegoede@redhat.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH v2] extcon: intel-cht-wc: Also set direction and drv flags for V5 boost GPIO
Date: Tue, 20 Feb 2018 08:35:57 +0900 [thread overview]
Message-ID: <5A8B5F5D.8090208@samsung.com> (raw)
In-Reply-To: <20180219132046.13450-1-hdegoede@redhat.com>
Hi,
On 2018년 02월 19일 22:20, Hans de Goede wrote:
> Sometimes (firmware bug?) the V5 boost GPIO is not configured as output
> by the BIOS, leading to the 5V boost convertor being permanently on,
>
> Explicitly set the direction and drv flags rather then inheriting them
> from the firmware to fix this.
>
> Fixes: 585cb239f4de ("extcon: intel-cht-wc: Disable external 5v boost ...")
> Cc: stable@vger.kernel.org
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Add Fixes tag and Cc: stable
> ---
> drivers/extcon/extcon-intel-cht-wc.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
> index 7c4bc8c44c3f..b7e9ea377d70 100644
> --- a/drivers/extcon/extcon-intel-cht-wc.c
> +++ b/drivers/extcon/extcon-intel-cht-wc.c
> @@ -66,6 +66,8 @@
>
> #define CHT_WC_VBUS_GPIO_CTLO 0x6e2d
> #define CHT_WC_VBUS_GPIO_CTLO_OUTPUT BIT(0)
> +#define CHT_WC_VBUS_GPIO_CTLO_DRV_OD BIT(4)
> +#define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT BIT(5)
>
> enum cht_wc_usb_id {
> USB_ID_OTG,
> @@ -183,14 +185,15 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
> {
> int ret, val;
>
> - val = enable ? CHT_WC_VBUS_GPIO_CTLO_OUTPUT : 0;
> -
> /*
> * The 5V boost converter is enabled through a gpio on the PMIC, since
> * there currently is no gpio driver we access the gpio reg directly.
> */
> - ret = regmap_update_bits(ext->regmap, CHT_WC_VBUS_GPIO_CTLO,
> - CHT_WC_VBUS_GPIO_CTLO_OUTPUT, val);
> + val = CHT_WC_VBUS_GPIO_CTLO_DRV_OD | CHT_WC_VBUS_GPIO_CTLO_DIR_OUT;
> + if (enable)
> + val |= CHT_WC_VBUS_GPIO_CTLO_OUTPUT;
> +
> + ret = regmap_write(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, val);
> if (ret)
> dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
> }
>
Applied it to extcon-fixes branch.
--
Best Regards,
Chanwoo Choi
Samsung Electronics
prev parent reply other threads:[~2018-02-19 23:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20180219132056epcas4p3e883323c9a91d1039dedd8a98806e85e@epcas4p3.samsung.com>
2018-02-19 13:20 ` Hans de Goede
2018-02-19 23:35 ` Chanwoo Choi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5A8B5F5D.8090208@samsung.com \
--to=cw00.choi@samsung.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome