From: Nick Terrell <terrelln@fb.com>
To: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca>
Cc: Michael Forney <forney@google.com>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Michal Marek <michal.lkml@markovi.net>,
"Nick Desaulniers" <ndesaulniers@google.com>,
Ingo Molnar <mingo@kernel.org>,
"Sedat Dilek" <sedat.dilek@gmail.com>,
Kees Cook <keescook@chromium.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-kbuild@vger.kernel.org" <linux-kbuild@vger.kernel.org>
Subject: Re: [PATCH v2 1/2] kbuild: use perl instead of shell to get file size
Date: Fri, 3 Dec 2021 00:45:46 +0000 [thread overview]
Message-ID: <5AD03AD1-4422-4F91-85DF-086E11A47FA9@fb.com> (raw)
In-Reply-To: <20211124153105.155739-1-alex_y_xu@yahoo.ca>
> On Nov 24, 2021, at 7:31 AM, Alex Xu (Hello71) <alex_y_xu@yahoo.ca> wrote:
>
> This makes it easier to get the size of multiple files. Perl is already
> a requirement for all builds to do header checks, so this is not an
> additional dependency.
> ---
> arch/arm/boot/deflate_xip_data.sh | 2 +-
> arch/powerpc/boot/wrapper | 2 +-
> scripts/Makefile.lib | 9 ++-------
> scripts/file-size.pl | 8 ++++++++
> scripts/file-size.sh | 4 ----
> scripts/link-vmlinux.sh | 4 ++--
> 6 files changed, 14 insertions(+), 15 deletions(-)
> create mode 100755 scripts/file-size.pl
> delete mode 100755 scripts/file-size.sh
>
> diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
> index 304495c3c2c5..14cfa2babb93 100755
> --- a/arch/arm/boot/deflate_xip_data.sh
> +++ b/arch/arm/boot/deflate_xip_data.sh
> @@ -43,7 +43,7 @@ data_start=$(($__data_loc - $base_offset))
> data_end=$(($_edata_loc - $base_offset))
>
> # Make sure data occupies the last part of the file.
> -file_end=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$XIPIMAGE")
> +file_end=$(${PERL} "${srctree}/scripts/file-size.pl" "$XIPIMAGE")
> if [ "$file_end" != "$data_end" ]; then
> printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
> $(($file_end + $base_offset)) $_edata_loc 1>&2
> diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> index 9184eda780fd..9f9ee8613432 100755
> --- a/arch/powerpc/boot/wrapper
> +++ b/arch/powerpc/boot/wrapper
> @@ -380,7 +380,7 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext"
>
> # Calculate the vmlinux.strip size
> ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
> -strip_size=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$vmz.$$")
> +strip_size=$(${PERL} "${srctree}/scripts/file-size.pl" "$vmz.$$")
>
> if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then
> # recompress the image if we need to
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index d1f865b8c0cb..ca901814986a 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -379,13 +379,8 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
>
> # Bzip2 and LZMA do not include size in file... so we have to fake that;
> # append the size as a 32-bit littleendian number as gzip does.
> -size_append = printf $(shell \
> -dec_size=0; \
> -for F in $(real-prereqs); do \
> - fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
> - dec_size=$$(expr $$dec_size + $$fsize); \
> -done; \
> -printf "%08x\n" $$dec_size | \
> +total_size = $(shell $(PERL) $(srctree)/scripts/file-size.pl $(real-prereqs))
> +size_append = printf $(shell printf "%08x\n" $(total_size) | \
> sed 's/\(..\)/\1 /g' | { \
> read ch0 ch1 ch2 ch3; \
> for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
> diff --git a/scripts/file-size.pl b/scripts/file-size.pl
> new file mode 100755
> index 000000000000..170bb6d048fa
> --- /dev/null
> +++ b/scripts/file-size.pl
> @@ -0,0 +1,8 @@
> +#!/usr/bin/perl -w
> +# SPDX-License-Identifier: GPL-2.0
> +my $total = 0;
> +foreach (@ARGV) {
> + @stat = stat $_ or die "$_: $!";
> + $total += $stat[7];
> +}
> +print "$total\n";
> diff --git a/scripts/file-size.sh b/scripts/file-size.sh
> deleted file mode 100755
> index 7eb7423416b5..000000000000
> --- a/scripts/file-size.sh
> +++ /dev/null
> @@ -1,4 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -set -- $(ls -dn "$1")
> -printf '%s\n' "$5"
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 5cdd9bc5c385..c3fa38bd18ab 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -384,8 +384,8 @@ if [ -n "${CONFIG_KALLSYMS}" ]; then
> kallsyms_step 2
>
> # step 3
> - size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso_prev})
> - size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
> + size1=$(${PERL} "${srctree}/scripts/file-size.pl" ${kallsymso_prev})
> + size2=$(${PERL} "${srctree}/scripts/file-size.pl" ${kallsymso})
>
> if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
> kallsyms_step 3
> --
> 2.34.0
>
You can add:
Tested-by: Nick Terrell <terrelln@fb.com>
next prev parent reply other threads:[~2021-12-03 0:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20211124153105.155739-1-alex_y_xu.ref@yahoo.ca>
2021-11-24 15:31 ` Alex Xu (Hello71)
2021-11-24 15:31 ` [PATCH v2 2/2] kbuild: pass --stream-size --no-content-size to zstd Alex Xu (Hello71)
2021-12-03 0:49 ` Nick Terrell
2021-12-05 22:52 ` Masahiro Yamada
2021-12-06 18:42 ` Nick Terrell
2021-12-17 8:51 ` Sedat Dilek
2021-12-17 13:44 ` Sedat Dilek
2021-12-03 0:45 ` Nick Terrell [this message]
2021-12-17 13:45 ` [PATCH v2 1/2] kbuild: use perl instead of shell to get file size Sedat Dilek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5AD03AD1-4422-4F91-85DF-086E11A47FA9@fb.com \
--to=terrelln@fb.com \
--cc=alex_y_xu@yahoo.ca \
--cc=forney@google.com \
--cc=keescook@chromium.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.lkml@markovi.net \
--cc=mingo@kernel.org \
--cc=ndesaulniers@google.com \
--cc=sedat.dilek@gmail.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®