mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yannick FERTRE <yannick.fertre@st.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"Archit Taneja" <architt@codeaurora.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	"benjamin.gaignard@linaro.org" <benjamin.gaignard@linaro.org>
Cc: Philippe CORNU <philippe.cornu@st.com>,
	Bhumika Goyal <bhumirks@gmail.com>,
	Alexandre TORGUE <alexandre.torgue@st.com>,
	"David Airlie" <airlied@linux.ie>,
	"daniel.vetter@ffwll.ch" <daniel.vetter@ffwll.ch>,
	Brian Norris <briannorris@chromium.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-rockchip@lists.infradead.org"
	<linux-rockchip@lists.infradead.org>,
	Ludovic BARRE <ludovic.barre@st.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Mickael REULIER <mickael.reulier@st.com>,
	Vincent ABRIOU <vincent.abriou@st.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] drm/bridge/synopsys: dsi: use adjusted_mode in mode_set
Date: Mon, 23 Apr 2018 12:29:34 +0000	[thread overview]
Message-ID: <5a214d57-0a1d-8cbe-eb9e-2f6a9ad1ddb8@st.com> (raw)
In-Reply-To: <2334482.mQhE6fZxKp@avalon>

Hi Philippe,
I've tried your patch on both 4.17-rc1 & drm-misc-next and it works fine.
So,

Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>

BR

Yannick Fertré

On 04/23/2018 12:10 PM, Laurent Pinchart wrote:
> Hi Philippe,
> 
> On Thursday, 8 February 2018 15:15:40 EEST Laurent Pinchart wrote:
>> On Saturday, 3 February 2018 00:41:26 EET Philippe CORNU wrote:
>>> On 01/29/2018 11:40 AM, Laurent Pinchart wrote:
>>>> On Monday, 29 January 2018 12:17:37 EET Philippe CORNU wrote:
>>>>> On 01/29/2018 10:46 AM, Laurent Pinchart wrote:
>>>>>> On Thursday, 25 January 2018 17:55:04 EET Philippe Cornu wrote:
>>>>>>> The "adjusted_mode" clock value (ie the real pixel clock) is more
>>>>>>> accurate than "mode" clock value (ie the panel/bridge requested
>>>>>>> clock value). It offers a better preciseness for timing
>>>>>>> computations and allows to reduce the extra dsi bandwidth in
>>>>>>> burst mode (from ~20% to ~10-12%, hw platform dependant).
>>>>>>>
>>>>>>> Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
>>>>>>
>>>>>> The adjusted mode is documented as
>>>>>>
>>>>>>    /**
>>>>>>    
>>>>>>     * @adjusted_mode:
>>>>>>     *
>>>>>>     * Internal display timings which can be used by the driver to
>>>>>>     handle
>>>>>>     * differences between the mode requested by userspace in @mode and
>>>>>>     what
>>>>>>     * is actually programmed into the hardware. It is purely driver
>>>>>>     * implementation defined what exactly this adjusted mode means.
>>>>>>     Usually
>>>>>>     * it is used to store the hardware display timings used between the
>>>>>>     * CRTC and encoder blocks.
>>>>>>     */
>>>>>>
>>>>>> This is easy to handle when the CRTC and encoder are controlled by the
>>>>>> same driver, as the field is "implementation defined" by a single
>>>>>> driver. However, when using bridges, there are two drivers involved,
>>>>>> and
>>>>>> they must both agree to meaningfully use the adjusted mode. I can't
>>>>>> see
>>>>>> how to do so without standardizing the meaning of the adjusted mode
>>>>>> field.
>>>>>
>>>>> This is exactly the reason why my first implementation used the dsi
>>>>> bridge "optional pixel clock" instead of the adjusted_mode (see [1])
>>>>>
>>>>> But after digging more into the drm source code, I think using
>>>>> adjusted_mode instead of the pixel clock here brings more advantages
>>>>> because:
>>>>> * adjusted_mode is an argument of bridge mode_set() probably for being
>>>>> used in any manner, maybe like this :)
>>>>> * if the bridge "user" (crtc or a master bridge drivers) does not need
>>>>> to modify its adjusted_mode then mode & adjusted_mode mode_set()
>>>>> arguments will have the same values so "no consequence" for the bridge.
>>>>> * if the bridge "user" (crtc or master bridge drivers) needs to adjust
>>>>> any value of the mode then this adjustment is available for the bridge.
>>>>
>>>> Remember that there can be multiple chained bridges, and a single
>>>> adjusted mode field.
>>>>
>>>>> * rockchip crtc updates a part of the mode (the clock), stm is doing
>>>>> the
>>>>> same (see [2]) but any future "user" of the dw_mipi_dsi bridge can
>>>>> adjust something else (blankings...) and the dw_mipi_dsi bridge will be
>>>>> then aware of...
>>>>>
>>>>> But maybe it is a wrong usage of the "adjusted_mode offer"...
>>>>
>>>> I don't disagree that there's a need for using adjusted values, but I
>>>> believe we need to create a clear API to do so. Using the adjust_mode
>>>> field as-is when it's clearly documented as being implementation-defined
>>>> is asking for trouble.
>>>
>>> Laurent, do you think we can use "adjusted mode" here in this small
>>> patch as the actual 2 "users" of this bridge (rockchip & stm) use both
>>> "adjusted mode" in their crtc?
>>
>> The Synopsys DSI driver might only be used by two display controller drivers
>> today, it is nonetheless a standard bridge driver that should not make any
>> assumption of a particular use of the adjusted_mode in particular display
>> controller drivers. To use the adjusted_mode value in bridge drivers we
>> need to standardize its usage, otherwise we'll end up with
>> incompatibilities between bridge drivers and display controller drivers.
> 
> Now that the documentation has been clarified I have no objection against this
> patch anymore.
> 
>>>>> [1] https://patchwork.freedesktop.org/patch/200240/
>>>>> [2] https://patchwork.freedesktop.org/patch/200720/
>>>>>
>>>>>> Daniel, what's your opinion on this ?
>>>
>>> Daniel, any opinion on the adjusted_mode usage?
>>>
>>>>>>> ---
>>>>>>> Note: This patch replaces "drm/bridge/synopsys: dsi: add optional
>>>>>>> pixel clock"
>>>>>>>
>>>>>>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 12 ++++++------
>>>>>>> 1 file changed, 6 insertions(+), 6 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>>>>>> b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index
>>>>>>> ed8af32f8e52..b926b62e9e33 100644
>>>>>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>>>>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>>>>>> @@ -707,20 +707,20 @@ static void dw_mipi_dsi_bridge_mode_set(struct
>>>>>>> drm_bridge *bridge,
>>>>>>>
>>>>>>>     	clk_prepare_enable(dsi->pclk);
>>>>>>>
>>>>>>> -	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->mode_flags,
>>>>>>> +	ret = phy_ops->get_lane_mbps(priv_data, adjusted_mode,
>>>>>>> dsi->mode_flags,
>>>>>>>
>>>>>>>     				     dsi->lanes, dsi->format, &dsi->lane_mbps);
>>>>>>>     
>>>>>>>     if (ret)
>>>>>>>     
>>>>>>>     	DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>>>>>>>     
>>>>>>>     pm_runtime_get_sync(dsi->dev);
>>>>>>>     dw_mipi_dsi_init(dsi);
>>>>>>>
>>>>>>> -	dw_mipi_dsi_dpi_config(dsi, mode);
>>>>>>> +	dw_mipi_dsi_dpi_config(dsi, adjusted_mode);
>>>>>>>
>>>>>>>     dw_mipi_dsi_packet_handler_config(dsi);
>>>>>>>     dw_mipi_dsi_video_mode_config(dsi);
>>>>>>>
>>>>>>> -	dw_mipi_dsi_video_packet_config(dsi, mode);
>>>>>>> +	dw_mipi_dsi_video_packet_config(dsi, adjusted_mode);
>>>>>>>
>>>>>>>     dw_mipi_dsi_command_mode_config(dsi);
>>>>>>>
>>>>>>> -	dw_mipi_dsi_line_timer_config(dsi, mode);
>>>>>>> -	dw_mipi_dsi_vertical_timing_config(dsi, mode);
>>>>>>> +	dw_mipi_dsi_line_timer_config(dsi, adjusted_mode);
>>>>>>> +	dw_mipi_dsi_vertical_timing_config(dsi, adjusted_mode);
>>>>>>>
>>>>>>>     dw_mipi_dsi_dphy_init(dsi);
>>>>>>>     dw_mipi_dsi_dphy_timing_config(dsi);
>>>>>>>
>>>>>>> @@ -734,7 +734,7 @@ static void dw_mipi_dsi_bridge_mode_set(struct
>>>>>>> drm_bridge *bridge,
>>>>>>>
>>>>>>>     dw_mipi_dsi_dphy_enable(dsi);
>>>>>>>
>>>>>>> -	dw_mipi_dsi_wait_for_two_frames(mode);
>>>>>>> +	dw_mipi_dsi_wait_for_two_frames(adjusted_mode);
>>>>>>>
>>>>>>>     /* Switch to cmd mode for panel-bridge pre_enable & panel prepare
>>>>>>>     */
>>>>>>>     dw_mipi_dsi_set_mode(dsi, 0);
> 

  reply	other threads:[~2018-04-23 12:30 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20180125155556epcas2p107973eb77ab08c436dbddcb66fcb7c89@epcas2p1.samsung.com>
2018-01-25 15:55 ` Philippe Cornu
2018-01-25 22:47   ` Brian Norris
2018-01-26  9:54     ` Philippe CORNU
2018-01-29  4:14       ` Archit Taneja
2018-01-29  9:46   ` Laurent Pinchart
2018-01-29 10:17     ` Philippe CORNU
2018-01-29 10:40       ` Laurent Pinchart
2018-02-02 22:41         ` Philippe CORNU
2018-02-08 13:15           ` Laurent Pinchart
2018-04-23 10:10             ` Laurent Pinchart
2018-04-23 12:29               ` Yannick FERTRE [this message]
2018-04-26  6:33   ` Andrzej Hajda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5a214d57-0a1d-8cbe-eb9e-2f6a9ad1ddb8@st.com \
    --to=yannick.fertre@st.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.torgue@st.com \
    --cc=architt@codeaurora.org \
    --cc=benjamin.gaignard@linaro.org \
    --cc=bhumirks@gmail.com \
    --cc=briannorris@chromium.org \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=ludovic.barre@st.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mickael.reulier@st.com \
    --cc=philippe.cornu@st.com \
    --cc=vincent.abriou@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®