From: Matthias Brugger <matthias.bgg@gmail.com>
To: Honghui Zhang <honghui.zhang@mediatek.com>
Cc: joro@8bytes.org, treding@nvidia.com, mark.rutland@arm.com,
robh@kernel.org, robin.murphy@arm.com, p.zabel@pengutronix.de,
devicetree@vger.kernel.org, pebolle@tiscali.nl,
kendrick.hsu@mediatek.com, arnd@arndb.de,
srv_heupstream@mediatek.com, catalin.marinas@arm.com,
will.deacon@arm.com, linux-kernel@vger.kernel.org,
tfiga@google.com, iommu@lists.linux-foundation.org,
robh+dt@kernel.org, djkurtz@google.com, kernel@pengutronix.de,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, l.stach@pengutronix.de,
yingjoe.chen@mediatek.com, eddie.huang@mediatek.com,
youlin.pei@mediatek.com, erin.lo@mediatek.com
Subject: Re: [PATCH v4 5/5] ARM: dts: mt2701: add iommu/smi dtsi node for mt2701
Date: Fri, 13 Jan 2017 15:54:20 +0100 [thread overview]
Message-ID: <5a45da57-9262-b1ff-1c6a-c5c211c1bfd4@gmail.com> (raw)
In-Reply-To: <577A1794.5040509@gmail.com>
On 04/07/16 10:00, Matthias Brugger wrote:
>
>
> On 04/07/16 03:32, Honghui Zhang wrote:
>> On Sun, 2016-07-03 at 21:12 +0200, Matthias Brugger wrote:
>>>
>>> On 07/03/2016 08:24 AM, Matthias Brugger wrote:
>>>>
>>>>
>>>> On 06/08/2016 11:51 AM, honghui.zhang@mediatek.com wrote:
>>>>> From: Honghui Zhang <honghui.zhang@mediatek.com>
>>>>>
>>>>> Add the dtsi node of iommu and smi for mt2701.
>>>>>
>>>>> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
>>>>> ---
>>>>> arch/arm/boot/dts/mt2701.dtsi | 51
>>>>> +++++++++++++++++++++++++++++++++++++++++++
>>>>> 1 file changed, 51 insertions(+)
>>>>>
>>>>
>>>> Applied,
>>>
>>> Please resend the patch including the infracfg and mmsys node.
>>>
>>
>> Hi, Matthias,
>>
>> Please hold this one.
>> This one is based on CCF "arm: dts: mt2701: Add clock controller device
>> nodes"[1] and power domain patch "Mediatek MT2701 SCPSYS power domain
>> support v7"[2],
>> But these two patchset are still being reviewed now.
>>
>> Do you think it's better that I send this one later after ccf and power
>> domain patch got merged? I will send this patch later if it's OK with
>> you.
>>
>
> Sounds good.
Applied now to v4.10-next/dts32
Thanks.
>
> Thanks a lot,
> Matthias
>
>> Thanks.
>> [1] https://patchwork.kernel.org/patch/9109081
>> [2]
>> http://lists.infradead.org/pipermail/linux-mediatek/2016-May/005429.html
>>
>>> Regards,
>>> Matthias
>>>
>>>>
>>>> Thanks.
>>>>
>>>>> diff --git a/arch/arm/boot/dts/mt2701.dtsi
>>>>> b/arch/arm/boot/dts/mt2701.dtsi
>>>>> index 42d5a37..363de0d 100644
>>>>> --- a/arch/arm/boot/dts/mt2701.dtsi
>>>>> +++ b/arch/arm/boot/dts/mt2701.dtsi
>>>>> @@ -16,6 +16,7 @@
>>>>> #include <dt-bindings/power/mt2701-power.h>
>>>>> #include <dt-bindings/interrupt-controller/irq.h>
>>>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>> +#include <dt-bindings/memory/mt2701-larb-port.h>
>>>>> #include "skeleton64.dtsi"
>>>>> #include "mt2701-pinfunc.h"
>>>>>
>>>>> @@ -160,6 +161,16 @@
>>>>> clock-names = "system-clk", "rtc-clk";
>>>>> };
>>>>>
>>>>> + smi_common: smi@1000c000 {
>>>>> + compatible = "mediatek,mt2701-smi-common";
>>>>> + reg = <0 0x1000c000 0 0x1000>;
>>>>> + clocks = <&infracfg CLK_INFRA_SMI>,
>>>>> + <&mmsys CLK_MM_SMI_COMMON>,
>>>>> + <&infracfg CLK_INFRA_SMI>;
>>>>> + clock-names = "apb", "smi", "async";
>>>>> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
>>>>> + };
>>>>> +
>>>>> sysirq: interrupt-controller@10200100 {
>>>>> compatible = "mediatek,mt2701-sysirq",
>>>>> "mediatek,mt6577-sysirq";
>>>>> @@ -169,6 +180,16 @@
>>>>> reg = <0 0x10200100 0 0x1c>;
>>>>> };
>>>>>
>>>>> + iommu: mmsys_iommu@10205000 {
>>>>> + compatible = "mediatek,mt2701-m4u";
>>>>> + reg = <0 0x10205000 0 0x1000>;
>>>>> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
>>>>> + clocks = <&infracfg CLK_INFRA_M4U>;
>>>>> + clock-names = "bclk";
>>>>> + mediatek,larbs = <&larb0 &larb1 &larb2>;
>>>>> + #iommu-cells = <1>;
>>>>> + };
>>>>> +
>>>>> apmixedsys: syscon@10209000 {
>>>>> compatible = "mediatek,mt2701-apmixedsys", "syscon";
>>>>> reg = <0 0x10209000 0 0x1000>;
>>>>> @@ -234,6 +255,16 @@
>>>>> status = "disabled";
>>>>> };
>>>>>
>>>>> + larb0: larb@14010000 {
>>>>> + compatible = "mediatek,mt2701-smi-larb";
>>>>> + reg = <0 0x14010000 0 0x1000>;
>>>>> + mediatek,smi = <&smi_common>;
>>>>> + clocks = <&mmsys CLK_MM_SMI_LARB0>,
>>>>> + <&mmsys CLK_MM_SMI_LARB0>;
>>>>> + clock-names = "apb", "smi";
>>>>> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
>>>>> + };
>>>>> +
>>>>> imgsys: syscon@15000000 {
>>>>> compatible = "mediatek,mt2701-imgsys", "syscon";
>>>>> reg = <0 0x15000000 0 0x1000>;
>>>>> @@ -241,6 +272,16 @@
>>>>> status = "disabled";
>>>>> };
>>>>>
>>>>> + larb2: larb@15001000 {
>>>>> + compatible = "mediatek,mt2701-smi-larb";
>>>>> + reg = <0 0x15001000 0 0x1000>;
>>>>> + mediatek,smi = <&smi_common>;
>>>>> + clocks = <&imgsys CLK_IMG_SMI_COMM>,
>>>>> + <&imgsys CLK_IMG_SMI_COMM>;
>>>>> + clock-names = "apb", "smi";
>>>>> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
>>>>> + };
>>>>> +
>>>>> vdecsys: syscon@16000000 {
>>>>> compatible = "mediatek,mt2701-vdecsys", "syscon";
>>>>> reg = <0 0x16000000 0 0x1000>;
>>>>> @@ -248,6 +289,16 @@
>>>>> status = "disabled";
>>>>> };
>>>>>
>>>>> + larb1: larb@16010000 {
>>>>> + compatible = "mediatek,mt2701-smi-larb";
>>>>> + reg = <0 0x16010000 0 0x1000>;
>>>>> + mediatek,smi = <&smi_common>;
>>>>> + clocks = <&vdecsys CLK_VDEC_CKGEN>,
>>>>> + <&vdecsys CLK_VDEC_LARB>;
>>>>> + clock-names = "apb", "smi";
>>>>> + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
>>>>> + };
>>>>> +
>>>>> hifsys: syscon@1a000000 {
>>>>> compatible = "mediatek,mt2701-hifsys", "syscon";
>>>>> reg = <0 0x1a000000 0 0x1000>;
>>>>>
>>
>>
next prev parent reply other threads:[~2017-01-13 14:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 9:50 [PATCH v4 0/5] MT2701 iommu support honghui.zhang
2016-06-08 9:50 ` [PATCH v4 1/5] dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smi honghui.zhang
2016-06-08 9:50 ` [PATCH v4 2/5] iommu/mediatek: move the common struct into header file honghui.zhang
2016-06-08 9:50 ` [PATCH v4 3/5] memory/mediatek: add support for mt2701 honghui.zhang
2016-06-08 9:51 ` [PATCH v4 4/5] iommu/mediatek: add support for mtk iommu generation one HW honghui.zhang
2016-06-08 9:51 ` [PATCH v4 5/5] ARM: dts: mt2701: add iommu/smi dtsi node for mt2701 honghui.zhang
2016-06-21 9:41 ` Joerg Roedel
2016-06-21 9:55 ` Honghui Zhang
2016-06-21 9:57 ` Joerg Roedel
2016-06-22 5:45 ` Eddie Huang
2016-06-22 7:45 ` Honghui Zhang
2016-06-22 8:31 ` Joerg Roedel
2016-06-22 8:39 ` Honghui Zhang
2016-06-22 8:58 ` Joerg Roedel
2016-07-03 6:24 ` Matthias Brugger
2016-07-03 19:12 ` Matthias Brugger
2016-07-04 1:32 ` Honghui Zhang
2016-07-04 8:00 ` Matthias Brugger
2017-01-13 14:54 ` Matthias Brugger [this message]
2017-01-16 2:48 ` Honghui Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a45da57-9262-b1ff-1c6a-c5c211c1bfd4@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@google.com \
--cc=eddie.huang@mediatek.com \
--cc=erin.lo@mediatek.com \
--cc=honghui.zhang@mediatek.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kendrick.hsu@mediatek.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=pebolle@tiscali.nl \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@google.com \
--cc=treding@nvidia.com \
--cc=will.deacon@arm.com \
--cc=yingjoe.chen@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome