mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: liubaolin <liubaolin12138@163.com>
To: "朱 天浩" <zhutianhao75@hotmail.com>, "Hyunchul Lee" <hyc.lee@gmail.com>
Cc: "linkinjeon@kernel.org" <linkinjeon@kernel.org>,
	"ntfs@lists.linux.dev" <ntfs@lists.linux.dev>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] ntfs: fix $MFTMirr write offset when it spans multiple folios
Date: Tue, 8 Sep 2026 13:51:16 +0800	[thread overview]
Message-ID: <5a81c4fa-807e-47ca-a143-6985036534a9@163.com> (raw)
In-Reply-To: <SY0P300MB0312DC95FDD1B45AF364267EDEB22@SY0P300MB0312.AUSP300.PROD.OUTLOOK.COM>



在 2026/9/8 04:41, 朱 天浩 写道:
> When commit 115380f9a2f9 ("ntfs: update mft operations") refactored the
> MFT code to use folios, it assumed $MFTMirr is allocated contiguously,
> which is indeed what mkfs arranges.  However, the folio rewrite kept a
> leftover from the old buffer-head/runlist based implementation:
> vol->cluster_size_mask is still applied to the mirror write offset.
> In fact it is no longer needed -- and in some configurations it is
> actively wrong.
> 
> The bug triggers whenever the four mirror records do not fit in a
> single folio, i.e. when mft_record_size exceeds PAGE_SIZE / 4 (for
> example mft_record_size > 1KiB on 4KiB pages).
> 
> For example, on the built-in 4Kn SSD (Apple SSD AP0256J) of a
> MacBookPro14,1 with 4096-byte MFT records, mirror record 3 is still
> written to the location of record 0.  $MFTMirr therefore gets out of
> sync with $MFT and the following warning is printed on remount:
> 
> 	ntfs: (device nvme0n1p3): check_mft_mirror(): $MFT and $MFTMirr
> 	      record 0 do not match.  Run chkdsk.
> 
> Fix it by always adding the folio offset (folio->index << PAGE_SHIFT)
> to the base LCN address instead of applying the cluster_size_mask
> truncation.  This is the standard file-offset calculation and is
> correct for every combination of cluster size, page size and MFT
> record size, provided $MFTMirr data is contiguous from mftmirr_lcn
> (which mkfs always arranges).
> 
> Tested on the volume above: before the change mirror records 1-3 are
> all written to record 0's sector; after the change the write-back
> probe reports:
> 
> 	ntfs: NTFSDBG pre mft_no=0x3 folio_idx=0x3 ofs=0x0 mftmirr_lcn=0x2540c5 clu_bits=12 rec_bits=12 PAGE_SHIFT=12 sect=0x12a0640
> 	ntfs: NTFSDBG pre mft_no=0x0 folio_idx=0x0 ofs=0x0 mftmirr_lcn=0x2540c5 clu_bits=12 rec_bits=12 PAGE_SHIFT=12 sect=0x12a0628
> 
> which matches the expected sectors computed as:
> 
> 	(NTFS_CLU_TO_B(mftmirr_lcn) + (folio->index << PAGE_SHIFT)) >> SECTOR_SHIFT
> 
> 	record 0: (0x2540c5 << 12) + 0x0000 = 0x2540c5000 >> 9 = 0x12a0628
> 	record 3: (0x2540c5 << 12) + 0x3000 = 0x2540c8000 >> 9 = 0x12a0640
> 
> A 13 MB file write succeeds on this volume and the file is byte-for-byte
> identical after a umount/mount cycle.
> 
> Fixes: 115380f9a2f9 ("ntfs: update mft operations")
> Assisted-by: UOS-AI
> Assisted-by: CodeBuddy:Hy4 preview
> Signed-off-by: Zhu Tianhao <zhutianhao75@hotmail.com>
> ---
> v2:
> - Removed the unreachable folio-size guard (thanks Hyunchul for the review)
> - Dropped the "While here" paragraph from the commit message
> - Clarified the trigger condition and retitled the subject
> 
> fs/ntfs/mft.c | 10 +++-------
>   1 file changed, 3 insertions(+), 7 deletions(-)
> 
> diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
> index 7e58c99f1728..8399f07d45d6 100644
> --- a/fs/ntfs/mft.c
> +++ b/fs/ntfs/mft.c
> @@ -462,7 +462,7 @@ int ntfs_sync_mft_mirror(struct ntfs_volume *vol, const u64 mft_no,
>   {
>   	u8 *kmirr;
>   	struct folio *folio;
> -	unsigned int folio_ofs, lcn_folio_off = 0;
> +	unsigned int folio_ofs;
>   	int err = 0;
>   	struct bio *bio;
>   
> @@ -492,15 +492,11 @@ int ntfs_sync_mft_mirror(struct ntfs_volume *vol, const u64 mft_no,
>   	memcpy(kmirr, m, vol->mft_record_size);
>   	kunmap_local(kmirr);
>   
> -	if (vol->cluster_size_bits > PAGE_SHIFT) {
> -		lcn_folio_off = folio->index << PAGE_SHIFT;
> -		lcn_folio_off &= vol->cluster_size_mask;
> -	}
> -
>   	bio = bio_alloc(vol->sb->s_bdev, 1, REQ_OP_WRITE, GFP_NOIO);
>   	bio->bi_iter.bi_sector =
>   		ntfs_bytes_to_bio_sector(NTFS_CLU_TO_B(vol, vol->mftmirr_lcn) +
> -					 lcn_folio_off + folio_ofs);
> +					 ((u64)folio->index << PAGE_SHIFT) +
> +					 folio_ofs);
>   
>   	if (bio_add_folio(bio, folio, vol->mft_record_size, folio_ofs))
>   		err = submit_bio_wait(bio);


Looks good to me.

Reviewed-by: Baolin Liu <liubaolin@kylinos.cn>


  reply	other threads:[~2026-09-08  5:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-05 12:35 [PATCH] ntfs: fix $MFTMirr write offset for MFT record sizes larger than PAGE_SIZE 朱 天浩
2026-09-05 14:08 ` liubaolin
2026-09-07  8:54 ` Hyunchul Lee
2026-09-07 20:41   ` [PATCH v2] ntfs: fix $MFTMirr write offset when it spans multiple folios 朱 天浩
2026-09-08  5:51     ` liubaolin [this message]
2026-09-08  9:41     ` Namjae Jeon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5a81c4fa-807e-47ca-a143-6985036534a9@163.com \
    --to=liubaolin12138@163.com \
    --cc=hyc.lee@gmail.com \
    --cc=linkinjeon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ntfs@lists.linux.dev \
    --cc=zhutianhao75@hotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®