mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: kernel test robot <lkp@intel.com>,
	Ryan Lee <ryans.lee@maximintegrated.com>
Cc: kbuild-all@lists.01.org, linux-kernel@vger.kernel.org,
	Mark Brown <broonie@kernel.org>,
	Naveen Manohar <naveen.m@intel.com>,
	Rander Wang <rander.wang@linux.intel.com>,
	Kai Vehmanen <kai.vehmanen@linux.intel.com>
Subject: Re: sound/soc/codecs/max98373-sdw.c:325:4: warning: Variable 'i' is reassigned a value before the old one has been used.
Date: Tue, 11 Aug 2020 10:04:07 -0500	[thread overview]
Message-ID: <5a9a2338-1348-a84b-36f2-280d603298af@linux.intel.com> (raw)
In-Reply-To: <202008111139.FaGnu4xu%lkp@intel.com>


> cppcheck warnings: (new ones prefixed by >>)
> 
>>> sound/soc/codecs/max98373-sdw.c:325:4: warning: Variable 'i' is reassigned a value before the old one has been used. [redundantAssignment]
>      i = 0;
>        ^
>     sound/soc/codecs/max98373-sdw.c:313:4: note: Variable 'i' is reassigned a value before the old one has been used.
>       i++;
>        ^

the variable is incremented at the end of the loop, and reset at the 
start of a new loop, not sure how to avoid this warning.

>     sound/soc/codecs/max98373-sdw.c:325:4: note: Variable 'i' is reassigned a value before the old one has been used.
>      i = 0;
>        ^
>     sound/soc/codecs/max98373-sdw.c:344:9: warning: Variable 'i' is reassigned a value before the old one has been used. [redundantAssignment]
>      for (i = 0; i < num_of_ports; i++)
>             ^
>     sound/soc/codecs/max98373-sdw.c:333:4: note: Variable 'i' is reassigned a value before the old one has been used.
>       i++;
>        ^
>     sound/soc/codecs/max98373-sdw.c:344:9: note: Variable 'i' is reassigned a value before the old one has been used.
>      for (i = 0; i < num_of_ports; i++)
>             ^

Same problem, the variable is reset at the start of a new loop, but the 
problem is solved - that code was removed in the latest code (to be 
submitted after the merge window).

> vim +/i +325 sound/soc/codecs/max98373-sdw.c
> 
>     281	
>     282	static int max98373_read_prop(struct sdw_slave *slave)
>     283	{
>     284		struct sdw_slave_prop *prop = &slave->prop;
>     285		int nval, i, num_of_ports;
>     286		u32 bit;
>     287		unsigned long addr;
>     288		struct sdw_dpn_prop *dpn;
>     289	
>     290		/* BITMAP: 00001000  Dataport 3 is active */
>     291		prop->source_ports = BIT(3);
>     292		/* BITMAP: 00000010  Dataport 1 is active */
>     293		prop->sink_ports = BIT(1);
>     294		prop->paging_support = true;
>     295		prop->clk_stop_timeout = 20;
>     296	
>     297		nval = hweight32(prop->source_ports);
>     298		num_of_ports = nval;
>     299		prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
>     300						  sizeof(*prop->src_dpn_prop),
>     301						  GFP_KERNEL);
>     302		if (!prop->src_dpn_prop)
>     303			return -ENOMEM;
>     304	
>     305		i = 0;
>     306		dpn = prop->src_dpn_prop;
>     307		addr = prop->source_ports;
>     308		for_each_set_bit(bit, &addr, 32) {
>     309			dpn[i].num = bit;
>     310			dpn[i].type = SDW_DPN_FULL;
>     311			dpn[i].simple_ch_prep_sm = true;
>     312			dpn[i].ch_prep_timeout = 10;
>     313			i++;
>     314		}
>     315	
>     316		/* do this again for sink now */
>     317		nval = hweight32(prop->sink_ports);
>     318		num_of_ports += nval;
>     319		prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
>     320						   sizeof(*prop->sink_dpn_prop),
>     321						   GFP_KERNEL);
>     322		if (!prop->sink_dpn_prop)
>     323			return -ENOMEM;
>     324	
>   > 325		i = 0;
>     326		dpn = prop->sink_dpn_prop;
>     327		addr = prop->sink_ports;
>     328		for_each_set_bit(bit, &addr, 32) {
>     329			dpn[i].num = bit;
>     330			dpn[i].type = SDW_DPN_FULL;
>     331			dpn[i].simple_ch_prep_sm = true;
>     332			dpn[i].ch_prep_timeout = 10;
>     333			i++;
>     334		}
>     335	
>     336		/* Allocate port_ready based on num_of_ports */
>     337		slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports,
>     338						 sizeof(*slave->port_ready),
>     339						 GFP_KERNEL);
>     340		if (!slave->port_ready)
>     341			return -ENOMEM;
>     342	
>     343		/* Initialize completion */
>     344		for (i = 0; i < num_of_ports; i++)
>     345			init_completion(&slave->port_ready[i]);
>     346	
>     347		/* set the timeout values */
>     348		prop->clk_stop_timeout = 20;
>     349	
>     350		return 0;
>     351	}
>     352	
> 
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
> 

      reply	other threads:[~2020-08-11 16:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-11  3:38 kernel test robot
2020-08-11 15:04 ` Pierre-Louis Bossart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5a9a2338-1348-a84b-36f2-280d603298af@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=kbuild-all@lists.01.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkp@intel.com \
    --cc=naveen.m@intel.com \
    --cc=rander.wang@linux.intel.com \
    --cc=ryans.lee@maximintegrated.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®