Re: [PATCH v6 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023

[Krishna Kurapati <quic_kriskura@quicinc.com>]

On 10/30/2024 4:32 PM, Jens Glathe via B4 Relay wrote:
> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> 
> Device tree for the Microsoft Windows Dev Kit 2023. This work
> is based on the initial work of Merck Hung <merckhung@gmail.com>.
> 
> Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts
> 
> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
> 
> Supported features:
> - USB type-c and type-a ports
> - minidp connector
> - built-in r8152 Ethernet adapter
> - PCIe devices
> - nvme
> - ath11k WiFi (WCN6855)
> - WCN6855 Bluetooth
> - A690 GPU
> - ADSP and CDSP
> - GPIO keys
> - Audio definition (works via USB)
> 
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---

[...]

> +&usb_2 {
> +	pinctrl-0 = <&usb2_en_state>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> +	dr_mode = "host";
> +	phy-names = "usb2-port0", "usb3-port0";
> +	phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
> +
> +	status = "okay";
> +};

 From what I remember, the phy names for multiport must be "usb2-X"  or 
"usb3-X". The above notation might compile but If I am not wrong, the 
phys won't be active. How was USB tested in this case ?

Moreover just marking status as "okay" for usb_2 must work like done in 
[1] and [2] and there is no need for explicitly marking dr_mode as host 
again and refactoring the phy-names.

[1]: 
https://lore.kernel.org/all/20240707085624.3411961-1-quic_kriskura@quicinc.com/
[2]: 
https://patchwork.kernel.org/project/linux-arm-msm/patch/20240501065641.965-1-johan+linaro@kernel.org/

Please fix this up.

Regards,
Krishna,