mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
To: Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-stm32@st-md-mailman.stormreply.com" 
	<linux-stm32@st-md-mailman.stormreply.com>,
	"amelie.delaunay@foss.st.com" <amelie.delaunay@foss.st.com>,
	"alexandre.torgue@foss.st.com" <alexandre.torgue@foss.st.com>
Subject: Re: [PATCH v3] usb: dwc2: drd: fix soft connect when gadget is unconfigured
Date: Fri, 11 Mar 2022 06:12:38 +0000	[thread overview]
Message-ID: <5b33ecc2-be50-1320-9bb1-8c7a2966f835@synopsys.com> (raw)
In-Reply-To: <1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com>

On 2/16/2022 12:12 PM, Fabrice Gasnier wrote:
> When the gadget driver hasn't been (yet) configured, and the cable is
> connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
> HOST tries to enumerate it.
> At the host side, this can result in a stuck USB port or worse. When
> getting lucky, some dmesg can be observed at the host side:
>   new high-speed USB device number ...
>   device descriptor read/64, error -110
> 
> Fix it in drd, by checking the enabled flag before calling
> dwc2_hsotg_core_connect(). It will be called later, once configured,
> by the normal flow:
> - udc_bind_to_driver
>   - usb_gadget_connect
>     - dwc2_hsotg_pullup
>       - dwc2_hsotg_core_connect
> 
> Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

Acked-by: Minas Harutyunyan <hminas@synopsys.com>

> ---
> Changes in v3:
> - remove extra () in dwc2_is_device_enabled() macro.
> Changes in v2:
> - Fix build error: 'struct dwc2_hsotg' has no member named 'enabled';
>    as reported by the kernel test robot.
>    https://urldefense.com/v3/__https://lore.kernel.org/all/202202112236.AwoOTtHO-lkp@intel.com/__;!!A4F2R9G_pg!KxYqv4z1NDZM9yu_eZO1eEo1ZARNbT10DdREGmrUOJvH3Jh9soyw9Hd5lckEWwA$
>    Add dwc2_is_device_enabled() macro to handle this.
> ---
>   drivers/usb/dwc2/core.h | 2 ++
>   drivers/usb/dwc2/drd.c  | 6 ++++--
>   2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 8a63da3..88c337b 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -1418,6 +1418,7 @@ void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
>   void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
>   int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
>   #define dwc2_is_device_connected(hsotg) (hsotg->connected)
> +#define dwc2_is_device_enabled(hsotg) (hsotg->enabled)
>   int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg);
>   int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup);
>   int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg);
> @@ -1454,6 +1455,7 @@ static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
>   					   int testmode)
>   { return 0; }
>   #define dwc2_is_device_connected(hsotg) (0)
> +#define dwc2_is_device_enabled(hsotg) (0)
>   static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
>   { return 0; }
>   static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg,
> diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
> index 1b39c47..d8d6493 100644
> --- a/drivers/usb/dwc2/drd.c
> +++ b/drivers/usb/dwc2/drd.c
> @@ -130,8 +130,10 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
>   		already = dwc2_ovr_avalid(hsotg, true);
>   	} else if (role == USB_ROLE_DEVICE) {
>   		already = dwc2_ovr_bvalid(hsotg, true);
> -		/* This clear DCTL.SFTDISCON bit */
> -		dwc2_hsotg_core_connect(hsotg);
> +		if (dwc2_is_device_enabled(hsotg)) {
> +			/* This clear DCTL.SFTDISCON bit */
> +			dwc2_hsotg_core_connect(hsotg);
> +		}
>   	} else {
>   		if (dwc2_is_device_mode(hsotg)) {
>   			if (!dwc2_ovr_bvalid(hsotg, false))


      reply	other threads:[~2022-03-11  6:14 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-16  8:12 Fabrice Gasnier
2022-03-11  6:12 ` Minas Harutyunyan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5b33ecc2-be50-1320-9bb1-8c7a2966f835@synopsys.com \
    --to=minas.harutyunyan@synopsys.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amelie.delaunay@foss.st.com \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®