I'm attempting to bring up a Compaq F752US laptop running Gentoo. The kernel.org 2.6.24.4, Gentoo Vanilla-sources and 2.6.24-gentoo-r4 kernels all fail to boot without selecting the 'noapic' option on the kernel command line. If I add noapic irqpoll the machine does boot but I see this problem for all 3 kernels: Is this possibly caused by having to choose the noapic irqpoll options? WARNING: at drivers/ssb/main.c:883 ssb_tmslow_reject_bitmask() Pid: 1, comm: swapper Not tainted 2.6.24-gentoo-r4 #4 [] ssb_tmslow_reject_bitmask+0x4b/0x56 [] ssb_device_is_enabled+0x9/0x2d [] ssb_pcicore_init+0x11/0x35 [] ssb_attach_queued_buses+0x86/0x26a [] ssb_pci_xtal+0x1ce/0x1eb [] ssb_bus_register+0x11a/0x17d [] ssb_pci_get_invariants+0x0/0x29d [] ssb_bus_pcibus_register+0x24/0x47 [] pci_set_master+0x51/0x55 [] ssb_pcihost_probe+0x5e/0x89 [] pci_device_probe+0x36/0x57 [] driver_probe_device+0xde/0x15c [] _spin_unlock+0xd/0x21 [] klist_next+0x58/0x6d [] __driver_attach+0x0/0x7f [] __driver_attach+0x49/0x7f [] bus_for_each_dev+0x33/0x55 [] driver_attach+0x16/0x18 [] __driver_attach+0x0/0x7f [] bus_add_driver+0x6d/0x197 [] __pci_register_driver+0x52/0x7e [] ssb_modinit+0x40/0x56 [] cpufreq_register_governor+0x4d/0x52 [] kernel_init+0x150/0x2b2 [] finish_task_switch+0x1c/0x57 [] ret_from_fork+0x6/0x1c [] kernel_init+0x0/0x2b2 [] kernel_init+0x0/0x2b2 [] kernel_thread_helper+0x7/0x10 ======================= ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 I found the SSB stuff in make menuconfig but I cannot disable it do I guess it's necessary and doesn't work correctly? What should/can I do about this? Kernel config attached. NOTE: Happy to switch the kernel.org kernel if necessary. Thanks, Mark laptop1 ~ # lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation MCP51 PCI-X GeForce Go 6100 (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 02) laptop1 ~ #