mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nitin Rawat <quic_nitirawa@quicinc.com>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: <agross@kernel.org>, <andersson@kernel.org>,
	<konrad.dybcio@linaro.org>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <quic_cang@quicinc.com>,
	<quic_nguyenb@quicinc.com>, <linux-scsi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
	"Naveen Kumar Goud Arepalli" <quic_narepall@quicinc.com>
Subject: Re: [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
Date: Wed, 30 Aug 2023 23:07:09 +0530	[thread overview]
Message-ID: <5bfd0788-d9a5-40e9-225d-a5f6bbd80c29@quicinc.com> (raw)
In-Reply-To: <20230828073849.GB5148@thinkpad>

On 8/28/2023 1:08 PM, Manivannan Sadhasivam wrote:
> On Wed, Aug 23, 2023 at 09:14:08PM +0530, Nitin Rawat wrote:
>> This Patch updates offset for core_clk_1us_cycles in DME_VS_CORE_CLK_CTRL
> 
> Please do not use "This patch" in commit message. Just reword it in imperative
> form.

Thanks Mani for the review. We Will address the commit text in next 
patchset.

-Nitin


> 
>> register. Offset for core_clk_1us_cycles is changed from Qualcomm UFS
>> Controller V4.0.0 onwards.
>>
>> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
>> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
>> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
>> ---
>>   drivers/ufs/host/ufs-qcom.c | 19 ++++++++++++++-----
>>   drivers/ufs/host/ufs-qcom.h |  2 ++
>>   2 files changed, 16 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>> index f88febb23123..1108b0cd43b3 100644
>> --- a/drivers/ufs/host/ufs-qcom.c
>> +++ b/drivers/ufs/host/ufs-qcom.c
>> @@ -1297,12 +1297,21 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
>>   }
>>
>>   static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
>> -						       u32 clk_cycles)
>> +						       u32 clk_1us_cycles)
> 
> How about "cycles_in_1us", since this value specifies "Number of clk cycles in
> 1us"?
I Will take care of this in next patchset

-Nitin

> 
>>   {
>> -	int err;
>> +	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> +	u32 mask = DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
>>   	u32 core_clk_ctrl_reg;
>> +	u32 offset = 0;
>> +	int err;
>> +
>> +	/* Bit mask and offset changed on UFS host controller V4.0.0 onwards */
> 
> This is not offset value, but rather shift. Still, if you use bitfield macros
> as I suggested below, you could get rid of this variable.

I Will take care of this in next patchset

-Nitin

> 
>> +	if (host->hw_ver.major >= 4) {
>> +		mask = MAX_CORE_CLK_1US_CYCLES_MASK_V4;
>> +		offset = MAX_CORE_CLK_1US_CYCLES_OFFSET_V4;
>> +	}
>>
>> -	if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
>> +	if (clk_1us_cycles > mask)
>>   		return -EINVAL;
> 
> 	if (!FIELD_FIT(mask, cycles_in_1us))
> 		return -ERANGE;
> 
>>
>>   	err = ufshcd_dme_get(hba,
>> @@ -1311,8 +1320,8 @@ static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
>>   	if (err)
>>   		return err;
>>
>> -	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
>> -	core_clk_ctrl_reg |= clk_cycles;
>> +	core_clk_ctrl_reg &= ~(mask << offset);
>> +	core_clk_ctrl_reg |= clk_1us_cycles << offset;
>>
> 
> 	core_clk_ctrl_reg &= ~mask;
> 	core_clk_ctrl_reg |= FIELD_PREP(mask, cycles_in_1us);
> 
>>   	/* Clear CORE_CLK_DIV_EN */
>>   	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
>> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
>> index d6f8e74bd538..a829296e11bb 100644
>> --- a/drivers/ufs/host/ufs-qcom.h
>> +++ b/drivers/ufs/host/ufs-qcom.h
>> @@ -129,6 +129,8 @@ enum {
>>   #define PA_VS_CONFIG_REG1	0x9000
>>   #define DME_VS_CORE_CLK_CTRL	0xD002
>>   /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
> 
>> +#define MAX_CORE_CLK_1US_CYCLES_MASK_V4		0xFFF
> 
> #define MAX_CORE_CLK_1US_CYCLES_MASK_V4				GENMASK(27, 16)
> #define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	GENMASK(7, 0)
> 
> - Mani


I will update it. Thanks
-Nitin

> 
>> +#define MAX_CORE_CLK_1US_CYCLES_OFFSET_V4	0x10
>>   #define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
>>   #define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	0xFF
>>
>> --
>> 2.17.1
>>
> 

  reply	other threads:[~2023-08-30 18:30 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-23 15:44 [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles Nitin Rawat
2023-08-28  7:38   ` Manivannan Sadhasivam
2023-08-30 17:37     ` Nitin Rawat [this message]
2023-08-23 15:44 ` [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk Nitin Rawat
2023-08-28  7:40   ` Manivannan Sadhasivam
2023-08-30 17:37     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes Nitin Rawat
2023-08-28  8:05   ` Manivannan Sadhasivam
2023-08-28  8:13     ` Manivannan Sadhasivam
2023-08-23 15:44 ` [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification Nitin Rawat
2023-08-28  8:08   ` Manivannan Sadhasivam
2023-08-31  9:11     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function Nitin Rawat
2023-08-28  8:17   ` Manivannan Sadhasivam
2023-08-31  9:18     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions Nitin Rawat
2023-08-28  8:18   ` Manivannan Sadhasivam
2023-08-25 21:44 ` [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec Martin K. Petersen
2023-08-28 12:59   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5bfd0788-d9a5-40e9-225d-a5f6bbd80c29@quicinc.com \
    --to=quic_nitirawa@quicinc.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=jejb@linux.ibm.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_narepall@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®