On Sun, 28 Jun 2026, Kürşat Abaylı wrote: > Add support for querying and switching the graphics MUX mode on HP > systems via WMI. This introduces the 'gpu_mux_mode' sysfs attribute > under the hp-wmi platform device, allowing userspace tools to check > and safely switch between available graphics modes (e.g., UMA, Hybrid, > Discrete). > > The hardware capabilities mask is primarily read using the modern > 128-byte System Design Data query. However, to ensure backward > compatibility with older models, a fallback mechanism is implemented. > By mirroring the behavior of the Windows Omen Gaming Hub software, if > the modern query fails but the MUX WMI endpoint (0x52) responds > successfully to a read request, the driver defaults to a standard > Hybrid + Discrete support mask (0x06). > > The patch relies on the zero_if_sup() macro to handle input size > requirements safely across different BIOS implementations and uses > standard error handling paths. > > Signed-off-by: Kürşat Abaylı > --- > drivers/platform/x86/hp/hp-wmi.c | 128 +++++++++++++++++++++++++++++++ > 1 file changed, 128 insertions(+) > > diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c > index 8ba286ed8721..256e37d91767 100644 > --- a/drivers/platform/x86/hp/hp-wmi.c > +++ b/drivers/platform/x86/hp/hp-wmi.c > @@ -14,6 +14,7 @@ > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > #include > +#include > #include > #include > #include > @@ -58,6 +59,8 @@ enum hp_ec_offsets { > #define HP_FAN_SPEED_AUTOMATIC 0x00 > #define HP_POWER_LIMIT_DEFAULT 0x00 > #define HP_POWER_LIMIT_NO_CHANGE 0xFF > +#define HPWMI_MUX_MODE_MASK 0x7F GENMASK() > +#define HPWMI_MUX_LEGACY_MASK (BIT(1) | BIT(2)) Do we know what these bits are so they could be named with defines and then combined with NAMED1 | NAMED2? > #define zero_if_sup(tmp) (zero_insize_support?0:sizeof(tmp)) // use when zero insize is required > > @@ -332,6 +335,7 @@ enum hp_wmi_commandtype { > HPWMI_POSTCODEERROR_QUERY = 0x2a, > HPWMI_SYSTEM_DEVICE_MODE = 0x40, > HPWMI_THERMAL_PROFILE_QUERY = 0x4c, > + HPWMI_GRAPHICS_MUX_QUERY = 0x52, > }; > > struct victus_power_limits { > @@ -1124,12 +1128,135 @@ static int camera_shutter_input_setup(void) > return err; > } > > +static const u8 mux_bitmask_map[] = { > + [0] = BIT(1), /* Hybrid */ > + [1] = BIT(2), /* Discrete */ > + [2] = BIT(3), /* Optimus */ > + [3] = BIT(0), /* UMA */ Please use named defines instead of BIT(x) so you won't need comments anymore. Are the above BIT(1) | BIT(2) actually same as hybrid & discrete here? In that case the naming them with defines makes the connection between them and these array entries much clearer. > +}; > + > +static int hp_wmi_get_mux_supported_modes(u8 *supported) > +{ > + u8 buffer[128] = { 0 }; > + u8 legacy_buffer[4] = { 0 }; = {}; is enough to initialize to default values (x2). Please use reverse xmas-tree order. > + u32 req_packet = 0; > + int ret; > + > + if (!supported) > + return -EINVAL; > + > + /* Try modern BIOS design data query (128-byte buffer) */ > + ret = hp_wmi_perform_query(HPWMI_GET_SYSTEM_DESIGN_DATA, HPWMI_GM, > + buffer, zero_if_sup(req_packet), sizeof(buffer)); > + > + if (ret == 0) { Please don't leave empty line between call and it's return value check. > + *supported = buffer[7]; > + return 0; > + } > + > + /* > + * (Fallback): Legacy BIOS behavior based on Omen Gaming Hub. > + * If the modern query is not supported, check if the MUX query endpoint > + * responds to a read request. If it succeeds, the hardware has MUX > + * capability but lacks the mode map, defaulting to Hybrid + Discrete. > + */ > + ret = hp_wmi_perform_query(HPWMI_GRAPHICS_MUX_QUERY, HPWMI_READ, > + legacy_buffer, sizeof(legacy_buffer), 0); > + > + if (ret == 0) { > + *supported = HPWMI_MUX_LEGACY_MASK; > + return 0; > + } > + > + return ret < 0 ? ret : -EINVAL; This should probably be split for clarity. > +} > + > +static int hp_wmi_get_mux_mode(u8 *mode) > +{ > + u8 buffer[4] = { 0 }; > + int ret; > + > + if (!mode) > + return -EINVAL; > + > + ret = hp_wmi_perform_query(HPWMI_GRAPHICS_MUX_QUERY, HPWMI_READ, > + buffer, sizeof(buffer), sizeof(buffer)); > + > + if (ret) > + return ret < 0 ? ret : -EINVAL; Please split to two ifs. > + > + /* Mask the highest bit, which might be used as a BIOS status flag */ > + *mode = buffer[0] & HPWMI_MUX_MODE_MASK; > + > + return 0; > +} > + > +static int hp_wmi_set_mux_mode(u8 mode) > +{ > + u8 buffer[4] = { mode, 0x00, 0x00, 0x00 }; > + int ret; > + > + ret = hp_wmi_perform_query(HPWMI_GRAPHICS_MUX_QUERY, HPWMI_WRITE, > + buffer, sizeof(buffer), sizeof(buffer)); > + > + if (ret) > + return ret < 0 ? ret : -EINVAL; > + > + return 0; > +} > + > +static ssize_t gpu_mux_mode_show(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + u8 mode; > + int ret; > + > + ret = hp_wmi_get_mux_mode(&mode); > + if (ret) > + return ret; > + > + return sysfs_emit(buf, "%u\n", mode); > +} > + > +static ssize_t gpu_mux_mode_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t count) > +{ > + u32 requested; > + u8 supported; > + int ret; > + > + ret = kstrtou32(buf, 0, &requested); > + if (ret) > + return ret; > + > + if (requested >= ARRAY_SIZE(mux_bitmask_map)) Please add include for ARRAY_SIZE(). > + return -EINVAL; > + > + ret = hp_wmi_get_mux_supported_modes(&supported); > + if (ret) > + return ret; > + > + /* Verify if the requested mode is allowed by the hardware mask */ > + if (!(supported & mux_bitmask_map[requested])) > + return -EOPNOTSUPP; > + > + ret = hp_wmi_set_mux_mode((u8)requested); Unnecessary cast. > + if (ret) > + return ret; > + > + return count; > +} > + > static DEVICE_ATTR_RO(display); > static DEVICE_ATTR_RO(hddtemp); > static DEVICE_ATTR_RW(als); > static DEVICE_ATTR_RO(dock); > static DEVICE_ATTR_RO(tablet); > static DEVICE_ATTR_RW(postcode); > +static DEVICE_ATTR_RW(gpu_mux_mode); > > static struct attribute *hp_wmi_attrs[] = { > &dev_attr_display.attr, > @@ -1138,6 +1265,7 @@ static struct attribute *hp_wmi_attrs[] = { > &dev_attr_dock.attr, > &dev_attr_tablet.attr, > &dev_attr_postcode.attr, > + &dev_attr_gpu_mux_mode.attr, > NULL, > }; > ATTRIBUTE_GROUPS(hp_wmi); > -- i.