mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device
Date: Fri, 10 Dec 2021 07:40:13 +0900	[thread overview]
Message-ID: <5d98df66-a1fb-a2cf-f780-963bf26f6d1e@opensource.wdc.com> (raw)
In-Reply-To: <20211209143519.60498-2-andriy.shevchenko@linux.intel.com>

On 2021/12/09 23:35, Andy Shevchenko wrote:
> Use temporary variable for struct device to make code neater.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

What is this based on ? Is this on top of Hannes series ?

> ---
>  drivers/ata/sata_dwc_460ex.c | 37 ++++++++++++++++++------------------
>  1 file changed, 19 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
> index 513bee589d12..5421f74c0199 100644
> --- a/drivers/ata/sata_dwc_460ex.c
> +++ b/drivers/ata/sata_dwc_460ex.c
> @@ -215,9 +215,10 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
>  {
>  	struct sata_dwc_device *hsdev = hsdevp->hsdev;
>  	struct dw_dma_slave *dws = &sata_dwc_dma_dws;
> +	struct device *dev = hsdev->dev;
>  	dma_cap_mask_t mask;
>  
> -	dws->dma_dev = hsdev->dev;
> +	dws->dma_dev = dev;
>  
>  	dma_cap_zero(mask);
>  	dma_cap_set(DMA_SLAVE, mask);
> @@ -225,8 +226,7 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
>  	/* Acquire DMA channel */
>  	hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
>  	if (!hsdevp->chan) {
> -		dev_err(hsdev->dev, "%s: dma channel unavailable\n",
> -			 __func__);
> +		dev_err(dev, "%s: dma channel unavailable\n", __func__);
>  		return -EAGAIN;
>  	}
>  
> @@ -236,19 +236,20 @@ static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
>  static int sata_dwc_dma_init_old(struct platform_device *pdev,
>  				 struct sata_dwc_device *hsdev)
>  {
> -	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
>  
> -	hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
> +	hsdev->dma = devm_kzalloc(dev, sizeof(*hsdev->dma), GFP_KERNEL);
>  	if (!hsdev->dma)
>  		return -ENOMEM;
>  
> -	hsdev->dma->dev = &pdev->dev;
> +	hsdev->dma->dev = dev;
>  	hsdev->dma->id = pdev->id;
>  
>  	/* Get SATA DMA interrupt number */
>  	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
>  	if (hsdev->dma->irq == NO_IRQ) {
> -		dev_err(&pdev->dev, "no SATA DMA irq\n");
> +		dev_err(dev, "no SATA DMA irq\n");
>  		return -ENODEV;
>  	}
>  
> @@ -1205,6 +1206,8 @@ static const struct ata_port_info sata_dwc_port_info[] = {
>  
>  static int sata_dwc_probe(struct platform_device *ofdev)
>  {
> +	struct device *dev = &ofdev->dev;
> +	struct device_node *np = dev->of_node;
>  	struct sata_dwc_device *hsdev;
>  	u32 idr, versionr;
>  	char *ver = (char *)&versionr;
> @@ -1214,12 +1217,11 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	struct ata_host *host;
>  	struct ata_port_info pi = sata_dwc_port_info[0];
>  	const struct ata_port_info *ppi[] = { &pi, NULL };
> -	struct device_node *np = ofdev->dev.of_node;
>  	struct resource *res;
>  
>  	/* Allocate DWC SATA device */
> -	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
> -	hsdev = devm_kzalloc(&ofdev->dev, sizeof(*hsdev), GFP_KERNEL);
> +	host = ata_host_alloc_pinfo(dev, ppi, SATA_DWC_MAX_PORTS);
> +	hsdev = devm_kzalloc(dev, sizeof(*hsdev), GFP_KERNEL);
>  	if (!host || !hsdev)
>  		return -ENOMEM;
>  
> @@ -1229,7 +1231,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	base = devm_platform_get_and_ioremap_resource(ofdev, 0, &res);
>  	if (IS_ERR(base))
>  		return PTR_ERR(base);
> -	dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
> +	dev_dbg(dev, "ioremap done for SATA register address\n");
>  
>  	/* Synopsys DWC SATA specific Registers */
>  	hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
> @@ -1243,11 +1245,10 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	/* Read the ID and Version Registers */
>  	idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
>  	versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
> -	dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
> -		   idr, ver[0], ver[1], ver[2]);
> +	dev_notice(dev, "id %d, controller version %c.%c%c\n", idr, ver[0], ver[1], ver[2]);
>  
>  	/* Save dev for later use in dev_xxx() routines */
> -	hsdev->dev = &ofdev->dev;
> +	hsdev->dev = dev;
>  
>  	/* Enable SATA Interrupts */
>  	sata_dwc_enable_interrupts(hsdev);
> @@ -1255,7 +1256,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	/* Get SATA interrupt number */
>  	irq = irq_of_parse_and_map(np, 0);
>  	if (irq == NO_IRQ) {
> -		dev_err(&ofdev->dev, "no SATA DMA irq\n");
> +		dev_err(dev, "no SATA DMA irq\n");
>  		return -ENODEV;
>  	}
>  
> @@ -1267,7 +1268,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	}
>  #endif
>  
> -	hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
> +	hsdev->phy = devm_phy_optional_get(dev, "sata-phy");
>  	if (IS_ERR(hsdev->phy))
>  		return PTR_ERR(hsdev->phy);
>  
> @@ -1282,7 +1283,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  	 */
>  	err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
>  	if (err)
> -		dev_err(&ofdev->dev, "failed to activate host");
> +		dev_err(dev, "failed to activate host");
>  
>  	return 0;
>  
> @@ -1306,7 +1307,7 @@ static int sata_dwc_remove(struct platform_device *ofdev)
>  	sata_dwc_dma_exit_old(hsdev);
>  #endif
>  
> -	dev_dbg(&ofdev->dev, "done\n");
> +	dev_dbg(dev, "done\n");
>  	return 0;
>  }
>  


-- 
Damien Le Moal
Western Digital Research

  reply	other threads:[~2021-12-09 22:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-09 14:35 [PATCH v1 1/3] ata: sata_dwc_460ex: Use devm_platform_*ioremap_resource() APIs Andy Shevchenko
2021-12-09 14:35 ` [PATCH v1 2/3] ata: sata_dwc_460ex: Use temporary variable for struct device Andy Shevchenko
2021-12-09 22:40   ` Damien Le Moal [this message]
2021-12-10  8:42     ` Andy Shevchenko
2021-12-10  9:25       ` Hannes Reinecke
2021-12-17  1:00   ` Damien Le Moal
2021-12-09 14:35 ` [PATCH v1 3/3] ata: sata_dwc_460ex: Remove unused forward declaration Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5d98df66-a1fb-a2cf-f780-963bf26f6d1e@opensource.wdc.com \
    --to=damien.lemoal@opensource.wdc.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®