Re: [PATCH v2 0/5] phy: tegra: xusb: Add Tegra186 support

[Kishon Vijay Abraham I <kishon@ti.com>]

Hi Thierry,

On 21/02/19 9:16 PM, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> This series adds support for Tegra186 to the XUSB pad controller driver.
> Patch 1 extends the device tree bindings with support for Tegra186 while
> patches 2-4 are preparatory work for the final patch 5 that adds the
> Tegra186 specific programming for the UPHY blocks.
> 
> Changes in v2:
> - address review comments from Kishon
> - added Reviewed-by tags from JC

I've merged this series.
However I'd like to see if we can add the features of xusb.c to phy-core.c and
remove xusb.c. This will be useful if there are other PHY vendors with similar
design as Tegra.

Thanks
Kishon

> 
> Thierry
> 
> JC Kuo (2):
>   phy: tegra: xusb: Skip single function lane programming
>   phy: tegra: xusb: Add Tegra186 support
> 
> Thierry Reding (3):
>   dt-bindings: phy: tegra: Add Tegra186 support
>   phy: tegra: xusb: Parse dual-role mode property
>   phy: tegra: xusb: Add support for power supplies
> 
>  .../phy/nvidia,tegra124-xusb-padctl.txt       |   9 +
>  MAINTAINERS                                   |   5 +
>  drivers/phy/tegra/Makefile                    |   1 +
>  drivers/phy/tegra/xusb-tegra186.c             | 899 ++++++++++++++++++
>  drivers/phy/tegra/xusb.c                      |  67 +-
>  drivers/phy/tegra/xusb.h                      |  35 +
>  6 files changed, 1014 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/phy/tegra/xusb-tegra186.c
>