mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Philipp Zabel <p.zabel@pengutronix.de>
To: Yu-Chun Lin <eleanor.lin@realtek.com>,
	mturquette@baylibre.com,  sboyd@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, cylee12@realtek.com,
	afaerber@suse.com, jyanchou@realtek.com
Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-realtek-soc@lists.infradead.org, james.tai@realtek.com,
	 cy.huang@realtek.com, stanley_chang@realtek.com
Subject: Re: [PATCH v6 02/10] reset: Add Realtek basic reset support
Date: Thu, 02 Apr 2026 11:15:49 +0200	[thread overview]
Message-ID: <5dd7ddb50b71de737aae6ad4d11bd28fa52443a9.camel@pengutronix.de> (raw)
In-Reply-To: <20260402073957.2742459-3-eleanor.lin@realtek.com>

On Do, 2026-04-02 at 15:39 +0800, Yu-Chun Lin wrote:
> From: Cheng-Yu Lee <cylee12@realtek.com>
> 
> Define the reset operations backed by a regmap-based register interface
> and prepare the reset controller to be registered through the reset
> framework.
> 
> Since the reset controllers on Realtek SoCs often share the same register
> space with the clock controllers, this common framework is designed to
> extract the regmap and device tree node from the parent device
> (e.g., an auxiliary device parent).
> 
> Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
> Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> ---
> Changes in v6:
> - Remove the global header include/linux/reset/realtek.h and use a local common.h
> instead.
> - Extract regmap and of_node directly from the parent device.
> - Remove struct rtk_reset_initdata. Now, pass struct rtk_reset_data directly when
> calling rtk_reset_controller_add().
> ---
>  MAINTAINERS                    |  1 +
>  drivers/reset/Kconfig          |  1 +
>  drivers/reset/Makefile         |  1 +
>  drivers/reset/realtek/Kconfig  |  3 ++
>  drivers/reset/realtek/Makefile |  2 +
>  drivers/reset/realtek/common.c | 85 ++++++++++++++++++++++++++++++++++
>  drivers/reset/realtek/common.h | 29 ++++++++++++
>  7 files changed, 122 insertions(+)
>  create mode 100644 drivers/reset/realtek/Kconfig
>  create mode 100644 drivers/reset/realtek/Makefile
>  create mode 100644 drivers/reset/realtek/common.c
>  create mode 100644 drivers/reset/realtek/common.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 07e73bf621b0..8f355896583b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22240,6 +22240,7 @@ L:	devicetree@vger.kernel.org
>  L:	linux-clk@vger.kernel.org
>  S:	Supported
>  F:	Documentation/devicetree/bindings/clock/realtek*
> +F:	drivers/reset/realtek/*
>  F:	include/dt-bindings/clock/realtek*
>  F:	include/dt-bindings/reset/realtek*
>  
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 7ce151f6a7e4..03be1931f264 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -398,6 +398,7 @@ config RESET_ZYNQMP
>  
>  source "drivers/reset/amlogic/Kconfig"
>  source "drivers/reset/hisilicon/Kconfig"
> +source "drivers/reset/realtek/Kconfig"
>  source "drivers/reset/spacemit/Kconfig"
>  source "drivers/reset/starfive/Kconfig"
>  source "drivers/reset/sti/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index fc0cc99f8514..4407d1630070 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -2,6 +2,7 @@
>  obj-y += core.o
>  obj-y += amlogic/
>  obj-y += hisilicon/
> +obj-y += realtek/
>  obj-y += spacemit/
>  obj-y += starfive/
>  obj-y += sti/
> diff --git a/drivers/reset/realtek/Kconfig b/drivers/reset/realtek/Kconfig
> new file mode 100644
> index 000000000000..99a14d355803
> --- /dev/null
> +++ b/drivers/reset/realtek/Kconfig
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config RESET_RTK_COMMON
> +	bool

Please make this build-testable with COMPILE_TEST.

> diff --git a/drivers/reset/realtek/Makefile b/drivers/reset/realtek/Makefile
> new file mode 100644
> index 000000000000..b59a3f7f2453
> --- /dev/null
> +++ b/drivers/reset/realtek/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_RESET_RTK_COMMON) += common.o
> diff --git a/drivers/reset/realtek/common.c b/drivers/reset/realtek/common.c
> new file mode 100644
> index 000000000000..ea7ff27117e7
> --- /dev/null
> +++ b/drivers/reset/realtek/common.c
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2019 Realtek Semiconductor Corporation
> + */
> +
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include "common.h"
> +
> +static inline struct rtk_reset_data *to_rtk_reset_controller(struct reset_controller_dev *r)
> +{
> +	return container_of(r, struct rtk_reset_data, rcdev);
> +}
> +
> +static inline struct rtk_reset_desc *rtk_reset_get_desc(struct rtk_reset_data *data,
> +							unsigned long idx)
> +{
> +	return &data->descs[idx];
> +}
> +
> +static int rtk_reset_assert(struct reset_controller_dev *rcdev,
> +			    unsigned long idx)
> +{
> +	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
> +	struct rtk_reset_desc *desc = rtk_reset_get_desc(data, idx);
> +	u32 mask = desc->write_en ? (0x3 << desc->bit) : BIT(desc->bit);
> +	u32 val  = desc->write_en ? (0x2 << desc->bit) : 0;
> +
> +	return regmap_update_bits(data->regmap, desc->ofs, mask, val);
> +}
> +
> +static int rtk_reset_deassert(struct reset_controller_dev *rcdev,
> +			      unsigned long idx)
> +{
> +	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
> +	struct rtk_reset_desc *desc = rtk_reset_get_desc(data, idx);
> +	u32 mask = desc->write_en ? (0x3 << desc->bit) : BIT(desc->bit);
> +	u32 val  = mask;
> +
> +	return regmap_update_bits(data->regmap, desc->ofs, mask, val);
> +}
> +
> +static int rtk_reset_status(struct reset_controller_dev *rcdev,
> +			    unsigned long idx)
> +{
> +	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
> +	struct rtk_reset_desc *desc = rtk_reset_get_desc(data, idx);
> +	u32 val;
> +	int ret;
> +
> +	ret = regmap_read(data->regmap, desc->ofs, &val);
> +	if (ret)
> +		return ret;
> +
> +	return !((val >> desc->bit) & 1);
> +}
> +
> +static const struct reset_control_ops rtk_reset_ops = {
> +	.assert   = rtk_reset_assert,
> +	.deassert = rtk_reset_deassert,
> +	.status   = rtk_reset_status,
> +};
> +
> +/* The caller must initialize data->rcdev.nr_resets and data->descs before
> + * calling rtk_reset_controller_add().
> + */
> +int rtk_reset_controller_add(struct device *dev,
> +			     struct rtk_reset_data *data)
> +{
> +	struct device *parent = dev->parent;
> +
> +	data->regmap = dev_get_regmap(parent, NULL);
> +	if (!data->regmap)
> +		return -ENODEV;
> +
> +	data->rcdev.owner     = THIS_MODULE;

The rtk_reset_desc arrays used by this code live in the calling module,
so it would be better to let the caller initialize .owner as well.

It doesn't make a difference in practice, since CONFIG_RESET_RTK_COMMON
isn't tristate (right now).


regards
Philipp

  reply	other threads:[~2026-04-02  9:16 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-02  7:39 [PATCH v6 00/10] clk: realtek: Add RTD1625 clock support Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 01/10] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 02/10] reset: Add Realtek basic reset support Yu-Chun Lin
2026-04-02  9:15   ` Philipp Zabel [this message]
2026-04-10  6:49     ` Yu-Chun Lin [林祐君]
2026-04-02  7:39 ` [PATCH v6 03/10] clk: realtek: Introduce a common probe() Yu-Chun Lin
2026-04-03 14:21   ` Brian Masney
2026-04-10  7:22     ` Yu-Chun Lin [林祐君]
2026-04-02  7:39 ` [PATCH v6 04/10] clk: realtek: Add support for phase locked loops (PLLs) Yu-Chun Lin
2026-04-03 14:34   ` Brian Masney
2026-04-10  7:43     ` Yu-Chun Lin [林祐君]
2026-04-03 14:44   ` Brian Masney
2026-04-10  7:53     ` Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 05/10] clk: realtek: Add support for gate clock Yu-Chun Lin
2026-04-03 14:40   ` Brian Masney
2026-04-10  8:19     ` Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 06/10] clk: realtek: Add support for mux clock Yu-Chun Lin
2026-04-03 14:54   ` Brian Masney
2026-04-10  8:24     ` Yu-Chun Lin [林祐君]
2026-04-02  7:39 ` [PATCH v6 07/10] clk: realtek: Add support for MMC-tuned PLL clocks Yu-Chun Lin
2026-04-03 15:07   ` Brian Masney
2026-04-17  7:40     ` Yu-Chun Lin
2026-04-03 15:10   ` Brian Masney
2026-04-17  7:43     ` Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 08/10] clk: realtek: Add RTD1625-CRT clock controller driver Yu-Chun Lin
2026-04-03 15:24   ` Brian Masney
2026-04-17  7:45     ` Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 09/10] clk: realtek: Add RTD1625-ISO " Yu-Chun Lin
2026-04-03 15:29   ` Brian Masney
2026-04-17  8:09     ` Yu-Chun Lin
2026-04-02  7:39 ` [PATCH v6 10/10] arm64: dts: realtek: Add clock support for RTD1625 Yu-Chun Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5dd7ddb50b71de737aae6ad4d11bd28fa52443a9.camel@pengutronix.de \
    --to=p.zabel@pengutronix.de \
    --cc=afaerber@suse.com \
    --cc=conor+dt@kernel.org \
    --cc=cy.huang@realtek.com \
    --cc=cylee12@realtek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eleanor.lin@realtek.com \
    --cc=james.tai@realtek.com \
    --cc=jyanchou@realtek.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-realtek-soc@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=stanley_chang@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®