mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "Troy Rollo" <linux2021@troy.rollo.name>,
	"Matthew Garrett" <mjg59@srcf.ucam.org>,
	"Pali Rohár" <pali@kernel.org>,
	"Mark Gross" <mgross@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] platform/x86: dell-wmi: Recognise or support new switches
Date: Tue, 21 Sep 2021 15:22:10 +0200	[thread overview]
Message-ID: <5e91d488-d6df-a4dc-0ead-bbf542dd0995@redhat.com> (raw)
In-Reply-To: <20210918073131.2966942-1-linux2021@troy.rollo.name>

Hi,

On 9/18/21 9:31 AM, Troy Rollo wrote:
> Adds support for:
> 
> - Dell Inspiron 2in1 tablet mode switch notifications. These are
>   delivered by a type 0x0011 message with code 0xe070, followed by a
>   flag (1 for laptop mode, 0 for tablet mode).
> 
> - Recognising (but not otherwise processing) the Dell Ultra Performance
>   mode request switch. This is delivered by a type 0x0012 message with
>   code 0x000d, followed by a parameter that is either 1 or 2. It is
>   not clear what (if anything) should be done with this notification, so
>   it is ignored.
> 
> Signed-off-by: Troy Rollo <linux2021@troy.rollo.name>

Thank you for your patch, I've applied this patch to my review-hans 
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans



> ---
>  drivers/platform/x86/dell/dell-wmi-base.c | 76 ++++++++++++++++++++---
>  1 file changed, 66 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/platform/x86/dell/dell-wmi-base.c b/drivers/platform/x86/dell/dell-wmi-base.c
> index 089c125e18f7..e07d3ba85a3f 100644
> --- a/drivers/platform/x86/dell/dell-wmi-base.c
> +++ b/drivers/platform/x86/dell/dell-wmi-base.c
> @@ -40,6 +40,7 @@ static bool wmi_requires_smbios_request;
>  
>  struct dell_wmi_priv {
>  	struct input_dev *input_dev;
> +	struct input_dev *tabletswitch_dev;
>  	u32 interface_version;
>  };
>  
> @@ -309,6 +310,9 @@ static const struct key_entry dell_wmi_keymap_type_0010[] = {
>   * Keymap for WMI events of type 0x0011
>   */
>  static const struct key_entry dell_wmi_keymap_type_0011[] = {
> +	/* Reflex keyboard switch on 2n1 devices */
> +	{ KE_IGNORE, 0xe070, { KEY_RESERVED } },
> +
>  	/* Battery unplugged */
>  	{ KE_IGNORE, 0xfff0, { KEY_RESERVED } },
>  
> @@ -340,21 +344,55 @@ static const struct key_entry dell_wmi_keymap_type_0011[] = {
>   * They are events with extended data
>   */
>  static const struct key_entry dell_wmi_keymap_type_0012[] = {
> +	/* Ultra-performance mode switch request */
> +	{ KE_IGNORE, 0x000d, { KEY_RESERVED } },
> +
>  	/* Fn-lock button pressed */
>  	{ KE_IGNORE, 0xe035, { KEY_RESERVED } },
>  };
>  
> -static void dell_wmi_process_key(struct wmi_device *wdev, int type, int code)
> +static void dell_wmi_switch_event(struct input_dev **subdev,
> +				  const char *devname,
> +				  int switchid,
> +				  int value)
> +{
> +	if (!*subdev) {
> +		struct input_dev *dev = input_allocate_device();
> +
> +		if (!dev) {
> +			pr_warn("could not allocate device for %s\n", devname);
> +			return;
> +		}
> +		__set_bit(EV_SW, (dev)->evbit);
> +		__set_bit(switchid, (dev)->swbit);
> +
> +		(dev)->name = devname;
> +		(dev)->id.bustype = BUS_HOST;
> +		if (input_register_device(dev)) {
> +			input_free_device(dev);
> +			pr_warn("could not register device for %s\n", devname);
> +			return;
> +		}
> +		*subdev = dev;
> +	}
> +
> +	input_report_switch(*subdev, switchid, value);
> +	input_sync(*subdev);
> +}
> +
> +static int dell_wmi_process_key(struct wmi_device *wdev, int type, int code, u16 *buffer, int remaining)
>  {
>  	struct dell_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
>  	const struct key_entry *key;
> +	int used = 0;
> +	int value = 1;
>  
>  	key = sparse_keymap_entry_from_scancode(priv->input_dev,
>  						(type << 16) | code);
>  	if (!key) {
>  		pr_info("Unknown key with type 0x%04x and code 0x%04x pressed\n",
>  			type, code);
> -		return;
> +		return 0;
>  	}
>  
>  	pr_debug("Key with type 0x%04x and code 0x%04x pressed\n", type, code);
> @@ -363,16 +401,27 @@ static void dell_wmi_process_key(struct wmi_device *wdev, int type, int code)
>  	if ((key->keycode == KEY_BRIGHTNESSUP ||
>  	     key->keycode == KEY_BRIGHTNESSDOWN) &&
>  	    acpi_video_handles_brightness_key_presses())
> -		return;
> +		return 0;
>  
>  	if (type == 0x0000 && code == 0xe025 && !wmi_requires_smbios_request)
> -		return;
> +		return 0;
>  
> -	if (key->keycode == KEY_KBDILLUMTOGGLE)
> +	if (key->keycode == KEY_KBDILLUMTOGGLE) {
>  		dell_laptop_call_notifier(
>  			DELL_LAPTOP_KBD_BACKLIGHT_BRIGHTNESS_CHANGED, NULL);
> +	} else if (type == 0x0011 && code == 0xe070 && remaining > 0) {
> +		dell_wmi_switch_event(&priv->tabletswitch_dev,
> +				      "Dell tablet mode switch",
> +				      SW_TABLET_MODE, !buffer[0]);
> +		return 1;
> +	} else if (type == 0x0012 && code == 0x000d && remaining > 0) {
> +		value = (buffer[2] == 2);
> +		used = 1;
> +	}
>  
> -	sparse_keymap_report_entry(priv->input_dev, key, 1, true);
> +	sparse_keymap_report_entry(priv->input_dev, key, value, true);
> +
> +	return used;
>  }
>  
>  static void dell_wmi_notify(struct wmi_device *wdev,
> @@ -430,21 +479,26 @@ static void dell_wmi_notify(struct wmi_device *wdev,
>  		case 0x0000: /* One key pressed or event occurred */
>  			if (len > 2)
>  				dell_wmi_process_key(wdev, buffer_entry[1],
> -						     buffer_entry[2]);
> +						     buffer_entry[2],
> +						     buffer_entry + 3,
> +						     len - 3);
>  			/* Extended data is currently ignored */
>  			break;
>  		case 0x0010: /* Sequence of keys pressed */
>  		case 0x0011: /* Sequence of events occurred */
>  			for (i = 2; i < len; ++i)
> -				dell_wmi_process_key(wdev, buffer_entry[1],
> -						     buffer_entry[i]);
> +				i += dell_wmi_process_key(wdev, buffer_entry[1],
> +							  buffer_entry[i],
> +							  buffer_entry + i,
> +							  len - i - 1);
>  			break;
>  		case 0x0012:
>  			if ((len > 4) && dell_privacy_process_event(buffer_entry[1], buffer_entry[3],
>  								    buffer_entry[4]))
>  				/* dell_privacy_process_event has handled the event */;
>  			else if (len > 2)
> -				dell_wmi_process_key(wdev, buffer_entry[1], buffer_entry[2]);
> +				dell_wmi_process_key(wdev, buffer_entry[1], buffer_entry[2],
> +						     buffer_entry + 3, len - 3);
>  			break;
>  		default: /* Unknown event */
>  			pr_info("Unknown WMI event type 0x%x\n",
> @@ -661,6 +715,8 @@ static void dell_wmi_input_destroy(struct wmi_device *wdev)
>  	struct dell_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
>  
>  	input_unregister_device(priv->input_dev);
> +	if (priv->tabletswitch_dev)
> +		input_unregister_device(priv->tabletswitch_dev);
>  }
>  
>  /*
> 


      reply	other threads:[~2021-09-21 13:22 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-18  7:31 Troy Rollo
2021-09-21 13:22 ` Hans de Goede [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5e91d488-d6df-a4dc-0ead-bbf542dd0995@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux2021@troy.rollo.name \
    --cc=mgross@linux.intel.com \
    --cc=mjg59@srcf.ucam.org \
    --cc=pali@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®