From: Jie Luo <quic_luoj@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_kkumarcs@quicinc.com>, <quic_suruchia@quicinc.com>,
<quic_pavir@quicinc.com>, <quic_linchen@quicinc.com>,
<quic_leiwei@quicinc.com>
Subject: Re: [PATCH v2 2/4] clk: qcom: cmnpll: Add IPQ5424 SoC support
Date: Tue, 29 Apr 2025 13:29:10 +0800 [thread overview]
Message-ID: <5eb5631f-8f58-44d8-a09f-4bdb4a804803@quicinc.com> (raw)
In-Reply-To: <20250411-qcom_ipq5424_cmnpll-v2-2-7252c192e078@quicinc.com>
Hello Stephen,
Thanks for your review on the first version of this patch series.
Gentle reminder, to re-review the updated patch for any further
comments.
Regards.
On 4/11/2025 8:58 PM, Luo Jie wrote:
> The CMN PLL in IPQ5424 SoC supplies the fixed clock to NSS at 300 MHZ
> and to PPE at 375 MHZ. Other output clocks from CMN PLL on this SoC,
> and their rates are same as IPQ9574.
>
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---
> drivers/clk/qcom/ipq-cmn-pll.c | 35 ++++++++++++++++++++++++++++++-----
> 1 file changed, 30 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/clk/qcom/ipq-cmn-pll.c b/drivers/clk/qcom/ipq-cmn-pll.c
> index 432d4c4b7aa6..b34d6faf67b8 100644
> --- a/drivers/clk/qcom/ipq-cmn-pll.c
> +++ b/drivers/clk/qcom/ipq-cmn-pll.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /*
> @@ -16,6 +16,10 @@
> * are supplied to GCC (24 MHZ as XO and 32 KHZ as sleep clock), and to PCS
> * with 31.25 MHZ.
> *
> + * On the IPQ5424 SoC, there is an output clock from CMN PLL to PPE at 375 MHZ,
> + * and an output clock to NSS (network subsystem) at 300 MHZ. The other output
> + * clocks from CMN PLL on IPQ5424 are the same as IPQ9574.
> + *
> * +---------+
> * | GCC |
> * +--+---+--+
> @@ -46,6 +50,7 @@
> #include <linux/regmap.h>
>
> #include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
> +#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
>
> #define CMN_PLL_REFCLK_SRC_SELECTION 0x28
> #define CMN_PLL_REFCLK_SRC_DIV GENMASK(9, 8)
> @@ -115,6 +120,20 @@ static const struct cmn_pll_fixed_output_clk ipq9574_output_clks[] = {
> CLK_PLL_OUTPUT(ETH1_50MHZ_CLK, "eth1-50mhz", 50000000UL),
> CLK_PLL_OUTPUT(ETH2_50MHZ_CLK, "eth2-50mhz", 50000000UL),
> CLK_PLL_OUTPUT(ETH_25MHZ_CLK, "eth-25mhz", 25000000UL),
> + { /* Sentinel */ }
> +};
> +
> +static const struct cmn_pll_fixed_output_clk ipq5424_output_clks[] = {
> + CLK_PLL_OUTPUT(IPQ5424_XO_24MHZ_CLK, "xo-24mhz", 24000000UL),
> + CLK_PLL_OUTPUT(IPQ5424_SLEEP_32KHZ_CLK, "sleep-32khz", 32000UL),
> + CLK_PLL_OUTPUT(IPQ5424_PCS_31P25MHZ_CLK, "pcs-31p25mhz", 31250000UL),
> + CLK_PLL_OUTPUT(IPQ5424_NSS_300MHZ_CLK, "nss-300mhz", 300000000UL),
> + CLK_PLL_OUTPUT(IPQ5424_PPE_375MHZ_CLK, "ppe-375mhz", 375000000UL),
> + CLK_PLL_OUTPUT(IPQ5424_ETH0_50MHZ_CLK, "eth0-50mhz", 50000000UL),
> + CLK_PLL_OUTPUT(IPQ5424_ETH1_50MHZ_CLK, "eth1-50mhz", 50000000UL),
> + CLK_PLL_OUTPUT(IPQ5424_ETH2_50MHZ_CLK, "eth2-50mhz", 50000000UL),
> + CLK_PLL_OUTPUT(IPQ5424_ETH_25MHZ_CLK, "eth-25mhz", 25000000UL),
> + { /* Sentinel */ }
> };
>
> /*
> @@ -297,7 +316,7 @@ static struct clk_hw *ipq_cmn_pll_clk_hw_register(struct platform_device *pdev)
>
> static int ipq_cmn_pll_register_clks(struct platform_device *pdev)
> {
> - const struct cmn_pll_fixed_output_clk *fixed_clk;
> + const struct cmn_pll_fixed_output_clk *p, *fixed_clk;
> struct clk_hw_onecell_data *hw_data;
> struct device *dev = &pdev->dev;
> struct clk_hw *cmn_pll_hw;
> @@ -305,8 +324,13 @@ static int ipq_cmn_pll_register_clks(struct platform_device *pdev)
> struct clk_hw *hw;
> int ret, i;
>
> - fixed_clk = ipq9574_output_clks;
> - num_clks = ARRAY_SIZE(ipq9574_output_clks);
> + fixed_clk = device_get_match_data(dev);
> + if (!fixed_clk)
> + return -EINVAL;
> +
> + num_clks = 0;
> + for (p = fixed_clk; p->name; p++)
> + num_clks++;
>
> hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, num_clks + 1),
> GFP_KERNEL);
> @@ -415,7 +439,8 @@ static const struct dev_pm_ops ipq_cmn_pll_pm_ops = {
> };
>
> static const struct of_device_id ipq_cmn_pll_clk_ids[] = {
> - { .compatible = "qcom,ipq9574-cmn-pll", },
> + { .compatible = "qcom,ipq9574-cmn-pll", .data = &ipq9574_output_clks },
> + { .compatible = "qcom,ipq5424-cmn-pll", .data = &ipq5424_output_clks },
> { }
> };
> MODULE_DEVICE_TABLE(of, ipq_cmn_pll_clk_ids);
>
next prev parent reply other threads:[~2025-04-29 5:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-11 12:58 [PATCH v2 0/4] Add CMN PLL clock controller support for IPQ5424 Luo Jie
2025-04-11 12:58 ` [PATCH v2 1/4] dt-bindings: clock: qcom: Add CMN PLL support for IPQ5424 SoC Luo Jie
2025-04-11 20:59 ` Rob Herring (Arm)
2025-04-11 12:58 ` [PATCH v2 2/4] clk: qcom: cmnpll: Add IPQ5424 SoC support Luo Jie
2025-04-29 5:29 ` Jie Luo [this message]
2025-04-29 19:58 ` Stephen Boyd
2025-04-11 12:58 ` [PATCH v2 3/4] arm64: dts: ipq5424: Add CMN PLL node Luo Jie
2025-04-11 12:58 ` [PATCH v2 4/4] arm64: dts: qcom: Update IPQ5424 xo_board to use fixed factor clock Luo Jie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5eb5631f-8f58-44d8-a09f-4bdb4a804803@quicinc.com \
--to=quic_luoj@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_kkumarcs@quicinc.com \
--cc=quic_leiwei@quicinc.com \
--cc=quic_linchen@quicinc.com \
--cc=quic_pavir@quicinc.com \
--cc=quic_suruchia@quicinc.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®