From: Zhang Rui <rui.zhang@intel.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: rjw@rjwysocki.net, daniel.lezcano@linaro.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH 2/3] cpuidle: ladder: Tune promotion/demotion threshold
Date: Fri, 25 Nov 2022 14:38:59 +0800 [thread overview]
Message-ID: <5ed329f894bc81f5375303a69c07dee16630503e.camel@intel.com> (raw)
In-Reply-To: <CAJZ5v0gPOUQDb8c_pVYjzBvU3e3U9JoLhJy5vRBF4h2=zvaHHw@mail.gmail.com>
Hi, Rafael,
thanks for reviewing the patch series.
On Wed, 2022-11-23 at 18:50 +0100, Rafael J. Wysocki wrote:
> On Sat, Nov 5, 2022 at 6:40 PM Zhang Rui <rui.zhang@intel.com> wrote:
> > After fixing the bogus comparison between u64 and s64, the ladder
> > governor stops making promotion decisions errornously.
> >
> > However, after this, it is found that the ladder governor demotes
> > much
> > easier than promotes.
>
> "After fixing an error related to using signed and unsigned integers
> in the ladder governor in a previous patch, that governor turns out
> to
> demote much easier than promote"
>
> > Below is captured using turbostat after a 30 seconds runtime idle,
> >
> > Without previous patch,
> > Busy% IRQ POLL C1 C1E C3 C6 C7s C8
> > C9 C10 CPU%c1 CPU%c3 CPU%c6 CPU%c7 PkgWatt
> > 0.30 2373 0 0 0 4 9 25 122
> > 326 2857 0.36 0.04 0.57 98.73 1.48
>
> Why is the above relevant?
Just for comparison purpose.
For a pure idle scenario (Busy% < 0.5), with ladder governor, we used
to have 99% CPU%c7, but now, with patch 1/3,
CPU%c1 CPU%c3 CPU%c6 CPU%c7
34.18 16.21 17.69 31.51
This does not look like the correct behavior for any cpuidle governor.
>
> > With previous patch,
> > Busy% IRQ POLL C1 C1E C3 C6 C7s C8
> > C9 C10 CPU%c1 CPU%c3 CPU%c6 CPU%c7 PkgWatt
> > 0.42 3071 0 771 838 447 327 336 382
> > 299 344 34.18 16.21 17.69 31.51 2.00
> >
> > And this is caused by the imbalanced
> > PROMOTION_COUNT/DEMOTION_COUNT.
>
> I would explain why/how the imbalanced PROMOTION_COUNT/DEMOTION_COUNT
> imbalance causes this.
sure, how about something below.
The PROMOTION_COUNT/DEMOTION_COUNT are used as the threshold between
the ladder governor detects it "should promote/demote", and the ladder
governor does a real promotion/demotion.
Currently, PROMOTION_COUNT is set to 4 and DEMOTION_COUNT is set to 1.
This means that the ladder governor does real demotion immediately when
it "should demote", but it does real promotion only if it "should
promote" 4 times in a row, without a single "should demote" occur in
between.
As a result, this lower the chance to do real promotion and the ladder
governor is more likely to choose a shallower state.
>
> I guess more residency in the deeper idle state is expected? Or
> desired??
>
> > With this patch,
> > Busy% IRQ POLL C1 C1E C3 C6 C7s C8
> > C9 C10 CPU%c1 CPU%c3 CPU%c6 CPU%c7 PkgWatt
> > 0.39 2436 0 1 72 177 51 194 243
> > 799 1883 0.50 0.32 0.35 98.45 1.53
> >
> > Note that this is an experimental patch to illustrate the problem,
> > and it is checked with idle scenario only for now.
> > I will try to evaluate with more scenarios, and if someone can help
> > evaluate with more scenarios at the same time and provide data for
> > the
> > benefit with different PROMOTION_COUNT/DEMOTION_COUNT values, that
> > would be great.
>
> So yes, this requires more work.
>
> Overall, I think that you are concerned that the previous change
> might
> be regarded as a regression and are trying to compensate for it with
> a
> PROMOTION_COUNT/DEMOTION_COUNT change.
Exactly.
> I'm not sure I can agree with that approach, because the shallower
> idle states might be preferred by the original ladder design
> intentionally, for performance reasons.
>
hmmm, even if there is only 30% c7/c8/c9/c10 residency in a pure idle
scenario?
And further more, since the imbalanced PROMOTION_COUNT/DEMOTION_COUNT
and the unsigned/signed integers problem are both there since the first
day the ladder governor was introduced, commit 4f86d3a8e297 ("cpuidle:
consolidate 2.6.22 cpuidle branch into one patch"),
my guess is that
the unsigned/signed integers problem introduces a lot of pseudo
promotions, and the PROMOTION_COUNT/DEMOTION_COUNT is introduced to
workaround this so that the ladder governor doesn't get stuck at deep
idle state.
I don't have a solid proof for this. But at least for the pure idle
scenario, I don't think 30% deep idle residency is the right behavior,
and it needs to be tuned anyway.
thanks,
rui
> > Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> > ---
> > drivers/cpuidle/governors/ladder.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/cpuidle/governors/ladder.c
> > b/drivers/cpuidle/governors/ladder.c
> > index fb61118aef37..4b47aa0a4da9 100644
> > --- a/drivers/cpuidle/governors/ladder.c
> > +++ b/drivers/cpuidle/governors/ladder.c
> > @@ -20,8 +20,8 @@
> > #include <asm/io.h>
> > #include <linux/uaccess.h>
> >
> > -#define PROMOTION_COUNT 4
> > -#define DEMOTION_COUNT 1
> > +#define PROMOTION_COUNT 2
> > +#define DEMOTION_COUNT 4
> >
> > struct ladder_device_state {
> > struct {
> > --
next prev parent reply other threads:[~2022-11-25 6:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-05 17:42 [RFC PATCH 1/3] cpuidle: ladder: Fix bogus comparison between s64 and u64 Zhang Rui
2022-11-05 17:42 ` [RFC PATCH 2/3] cpuidle: ladder: Tune promotion/demotion threshold Zhang Rui
2022-11-23 17:50 ` Rafael J. Wysocki
2022-11-23 23:53 ` Doug Smythies
2022-11-25 6:38 ` Zhang Rui [this message]
2022-11-25 13:36 ` Rafael J. Wysocki
2022-11-27 3:18 ` Zhang Rui
2022-11-05 17:42 ` [RFC PATCH 3/3] cpuidle: ladder: Fix handling for disabled states Zhang Rui
2022-11-23 17:56 ` Rafael J. Wysocki
2022-11-23 17:37 ` [RFC PATCH 1/3] cpuidle: ladder: Fix bogus comparison between s64 and u64 Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ed329f894bc81f5375303a69c07dee16630503e.camel@intel.com \
--to=rui.zhang@intel.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®