Re: [PATCH 1/2] dt-bindings: clock: qcom,sm8450-videocc: Add minItems property

[Jagadeesh Kona <quic_jkona@quicinc.com>]

On 6/18/2025 11:56 AM, Krzysztof Kozlowski wrote:
> On 17/06/2025 21:07, Jagadeesh Kona wrote:
>> Add minItems as 1 for power-domains and required-opps properties
>> to allow this binding to be compatible with both single and multiple
>> power domains.
> 
> This is your hardware, so you know how it works thus I expect here
> arguments why this is correct from the hardware point of view. Without
> this, it is impossible to judge whether this is a correct change.
> 
> If I overlook this now, it will be used in discussions by other qcom
> engineers, so unfortunately you see, you need to prepare perfect commits
> now...
>

These clk controllers mainly require MMCX power domain to be enabled to access
the clock registers. But to configure the cam & video PLLs in probe, an additional
MXC power domain also needs to be enabled.

Since the initial DTS changes only added MMCX power domain, this change is required
to be backward compatible with older DTS and avoid ABI breakage as discussed in below
thread.

https://lore.kernel.org/all/cc737a89-77e0-43bc-8766-2c8e9cce1863@quicinc.com/#t

Thanks,
Jagadeesh
 
> Best regards,
> Krzysztof