[PATCH v2] macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled

[Finn Thain <fthain@linux-m68k.org>]

drivers/macintosh/via-pmu-event.o: In function `via_pmu_event':
via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
via-pmu-event.c:(.text+0x68): undefined reference to `input_event'
via-pmu-event.c:(.text+0x94): undefined reference to `input_event'
via-pmu-event.c:(.text+0xb8): undefined reference to `input_event'
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init':
via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device'
via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device'
via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device'
make[1]: *** [Makefile:1155: vmlinux] Error 1
make: *** [Makefile:350: __build_one_by_one] Error 2

Don't call into the input subsystem unless CONFIG_INPUT is built-in.

Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
---
Changed since v1:
 - Adopted IS_ENABLED to avoid an ifdef as suggested by Christophe.
 - Added the ADB_PMU_EVENT symbol as suggested by Geert, though this
   adds a new Kconfig symbol for little gain AFAICS.
---
 drivers/macintosh/Kconfig   | 4 ++++
 drivers/macintosh/Makefile  | 3 ++-
 drivers/macintosh/via-pmu.c | 2 +-
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 5cdc361da37c..3942db15a2b8 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -67,6 +67,10 @@ config ADB_PMU
 	  this device; you should do so if your machine is one of those
 	  mentioned above.
 
+config ADB_PMU_EVENT
+	def_bool y
+	depends on ADB_PMU && INPUT=y
+
 config ADB_PMU_LED
 	bool "Support for the Power/iBook front LED"
 	depends on PPC_PMAC && ADB_PMU
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 49819b1b6f20..712edcb3e0b0 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -12,7 +12,8 @@ obj-$(CONFIG_MAC_EMUMOUSEBTN)	+= mac_hid.o
 obj-$(CONFIG_INPUT_ADBHID)	+= adbhid.o
 obj-$(CONFIG_ANSLCD)		+= ans-lcd.o
 
-obj-$(CONFIG_ADB_PMU)		+= via-pmu.o via-pmu-event.o
+obj-$(CONFIG_ADB_PMU)		+= via-pmu.o
+obj-$(CONFIG_ADB_PMU_EVENT)	+= via-pmu-event.o
 obj-$(CONFIG_ADB_PMU_LED)	+= via-pmu-led.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= via-pmu-backlight.o
 obj-$(CONFIG_ADB_CUDA)		+= via-cuda.o
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 399074306a74..495fd35b11de 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -1463,7 +1463,7 @@ pmu_handle_data(unsigned char *data, int len)
 		pmu_pass_intr(data, len);
 		/* len == 6 is probably a bad check. But how do I
 		 * know what PMU versions send what events here? */
-		if (len == 6) {
+		if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) {
 			via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
 			via_pmu_event(PMU_EVT_LID, data[1]&1);
 		}
-- 
2.32.0