From: Hans Verkuil <hverkuil@xs4all.nl>
To: Helen Koike <helen.koike@collabora.com>,
linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-kernel@vger.kernel.org
Cc: jgebben@codeaurora.org, mchehab@osg.samsung.com,
Sakari Ailus <sakari.ailus@iki.fi>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: Re: [RFC PATCH v3 07/11] [media] vimc: cap: Support several image formats
Date: Mon, 12 Jun 2017 11:58:02 +0200 [thread overview]
Message-ID: <5ef11f98-4f67-69e4-9d2d-e644054d3f7c@xs4all.nl> (raw)
In-Reply-To: <1496458714-16834-8-git-send-email-helen.koike@collabora.com>
On 06/03/2017 04:58 AM, Helen Koike wrote:
> Allow user space to change the image format as the frame size, the
> pixel format, colorspace, quantization, field YCbCr encoding
> and the transfer function
>
> Signed-off-by: Helen Koike <helen.koike@collabora.com>
>
> ---
>
> Changes in v3:
> [media] vimc: cap: Support several image formats
> - use *_DEFAULT macros for colorimetry in the default format
> - clamp height and width of the image by an even value
> - is user try to set colorspace to an invalid format, set all
> colorimetry parameters to _DEFAULT
> - remove V4L2_FMT_FLAG_COMPRESSED from vimc_cap_enum_fmt_vid_cap
> - remove V4L2_BUF_TYPE_VIDEO_CAPTURE from vimc_cap_enum_fmt_vid_cap
> - increase step_width and step_height to 2 instead of 1
> - remove link validate function, use the one in vimc-common.c
>
> Changes in v2:
> [media] vimc: cap: Support several image formats
> - this is a new commit in the serie (the old one was splitted in two)
> - allow user space to change all fields from struct v4l2_pix_format
> (e.g. colospace, quantization, field, xfer_func, ycbcr_enc)
> - link_validate and try_fmt: also checks colospace, quantization, field, xfer_func, ycbcr_enc
> - add struct v4l2_pix_format fmt_default
> - add enum_framesizes
> - enum_fmt_vid_cap: enumerate all formats from vimc_pix_map_table
> - add mode dev_dbg
>
>
> ---
> drivers/media/platform/vimc/vimc-capture.c | 131 +++++++++++++++++++++++++----
> 1 file changed, 115 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
> index 5bdecd1..e943267 100644
> --- a/drivers/media/platform/vimc/vimc-capture.c
> +++ b/drivers/media/platform/vimc/vimc-capture.c
> @@ -40,6 +40,14 @@ struct vimc_cap_device {
> struct media_pipeline pipe;
> };
>
> +static const struct v4l2_pix_format fmt_default = {
> + .width = 640,
> + .height = 480,
> + .pixelformat = V4L2_PIX_FMT_RGB24,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> +};
> +
> struct vimc_cap_buffer {
> /*
> * struct vb2_v4l2_buffer must be the first element
> @@ -73,7 +81,7 @@ static void vimc_cap_get_format(struct vimc_ent_device *ved,
> *fmt = vcap->format;
> }
>
> -static int vimc_cap_fmt_vid_cap(struct file *file, void *priv,
> +static int vimc_cap_g_fmt_vid_cap(struct file *file, void *priv,
> struct v4l2_format *f)
> {
> struct vimc_cap_device *vcap = video_drvdata(file);
> @@ -83,16 +91,112 @@ static int vimc_cap_fmt_vid_cap(struct file *file, void *priv,
> return 0;
> }
>
> +static int vimc_cap_try_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct v4l2_pix_format *format = &f->fmt.pix;
> + const struct vimc_pix_map *vpix;
> +
> + format->width = clamp_t(u32, format->width, VIMC_FRAME_MIN_WIDTH,
> + VIMC_FRAME_MAX_WIDTH) & ~1;
> + format->height = clamp_t(u32, format->height, VIMC_FRAME_MIN_HEIGHT,
> + VIMC_FRAME_MAX_HEIGHT) & ~1;
> +
> + /* Don't accept a pixelformat that is not on the table */
> + vpix = vimc_pix_map_by_pixelformat(format->pixelformat);
> + if (!vpix) {
> + format->pixelformat = fmt_default.pixelformat;
> + vpix = vimc_pix_map_by_pixelformat(format->pixelformat);
> + }
> + /* TODO: Add support for custom bytesperline values */
> + format->bytesperline = format->width * vpix->bpp;
> + format->sizeimage = format->bytesperline * format->height;
> +
> + if (format->field == V4L2_FIELD_ANY)
> + format->field = fmt_default.field;
> +
> + if (format->colorspace == V4L2_COLORSPACE_DEFAULT)
> + format->colorspace = fmt_default.colorspace;
> +
> + /* Check if values are out of range */
> + if (format->colorspace > V4L2_COLORSPACE_DCI_P3) {
> + format->colorspace = fmt_default.colorspace;
> + format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + format->quantization = V4L2_QUANTIZATION_DEFAULT;
> + format->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> + }
> + if (format->ycbcr_enc > V4L2_YCBCR_ENC_SMPTE240M)
> + format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + if (format->quantization > V4L2_QUANTIZATION_LIM_RANGE)
> + format->quantization = V4L2_QUANTIZATION_DEFAULT;
> + if (format->xfer_func > V4L2_XFER_FUNC_SMPTE2084)
> + format->xfer_func = V4L2_XFER_FUNC_DEFAULT;
You might want to move this to common, since the sensor has the same code.
> + return 0;
> +}
> +
> +static int vimc_cap_s_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct vimc_cap_device *vcap = video_drvdata(file);
> +
> + /* Do not change the format while stream is on */
> + if (vb2_is_busy(&vcap->queue))
> + return -EBUSY;
> +
> + vimc_cap_try_fmt_vid_cap(file, priv, f);
> +
> + dev_dbg(vcap->vdev.v4l2_dev->dev, "%s: format update: "
> + "old:%dx%d (0x%x, %d, %d, %d, %d) "
> + "new:%dx%d (0x%x, %d, %d, %d, %d)\n", vcap->vdev.name,
> + /* old */
> + vcap->format.width, vcap->format.height,
> + vcap->format.pixelformat, vcap->format.colorspace,
> + vcap->format.quantization, vcap->format.xfer_func,
> + vcap->format.ycbcr_enc,
> + /* new */
> + f->fmt.pix.width, f->fmt.pix.height,
> + f->fmt.pix.pixelformat, f->fmt.pix.colorspace,
> + f->fmt.pix.quantization, f->fmt.pix.xfer_func,
> + f->fmt.pix.ycbcr_enc);
> +
> + vcap->format = f->fmt.pix;
> +
> + return 0;
> +}
> +
> static int vimc_cap_enum_fmt_vid_cap(struct file *file, void *priv,
> struct v4l2_fmtdesc *f)
> {
> - struct vimc_cap_device *vcap = video_drvdata(file);
> + const struct vimc_pix_map *vpix = vimc_pix_map_by_index(f->index);
> +
> + if (!vpix)
> + return -EINVAL;
> +
> + f->pixelformat = vpix->pixelformat;
> +
> + return 0;
> +}
> +
> +static int vimc_cap_enum_framesizes(struct file *file, void *fh,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + const struct vimc_pix_map *vpix;
>
> - if (f->index > 0)
> + if (fsize->index)
> return -EINVAL;
>
> - /* We only support one format for now */
> - f->pixelformat = vcap->format.pixelformat;
> + /* Only accept code in the pix map table */
> + vpix = vimc_pix_map_by_code(fsize->pixel_format);
> + if (!vpix)
> + return -EINVAL;
> +
> + fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
> + fsize->stepwise.min_width = VIMC_FRAME_MIN_WIDTH;
> + fsize->stepwise.max_width = VIMC_FRAME_MAX_WIDTH;
> + fsize->stepwise.min_height = VIMC_FRAME_MIN_HEIGHT;
> + fsize->stepwise.max_height = VIMC_FRAME_MAX_HEIGHT;
> + fsize->stepwise.step_width = 2;
> + fsize->stepwise.step_height = 2;
>
> return 0;
> }
> @@ -110,10 +214,11 @@ static const struct v4l2_file_operations vimc_cap_fops = {
> static const struct v4l2_ioctl_ops vimc_cap_ioctl_ops = {
> .vidioc_querycap = vimc_cap_querycap,
>
> - .vidioc_g_fmt_vid_cap = vimc_cap_fmt_vid_cap,
> - .vidioc_s_fmt_vid_cap = vimc_cap_fmt_vid_cap,
> - .vidioc_try_fmt_vid_cap = vimc_cap_fmt_vid_cap,
> + .vidioc_g_fmt_vid_cap = vimc_cap_g_fmt_vid_cap,
> + .vidioc_s_fmt_vid_cap = vimc_cap_s_fmt_vid_cap,
> + .vidioc_try_fmt_vid_cap = vimc_cap_try_fmt_vid_cap,
> .vidioc_enum_fmt_vid_cap = vimc_cap_enum_fmt_vid_cap,
> + .vidioc_enum_framesizes = vimc_cap_enum_framesizes,
>
> .vidioc_reqbufs = vb2_ioctl_reqbufs,
> .vidioc_create_bufs = vb2_ioctl_create_bufs,
> @@ -360,15 +465,9 @@ struct vimc_ent_device *vimc_cap_create(struct v4l2_device *v4l2_dev,
> INIT_LIST_HEAD(&vcap->buf_list);
> spin_lock_init(&vcap->qlock);
>
> - /* Set the frame format (this is hardcoded for now) */
> - vcap->format.width = 640;
> - vcap->format.height = 480;
> - vcap->format.pixelformat = V4L2_PIX_FMT_RGB24;
> - vcap->format.field = V4L2_FIELD_NONE;
> - vcap->format.colorspace = V4L2_COLORSPACE_SRGB;
> -
> + /* Set default frame format */
> + vcap->format = fmt_default;
> vpix = vimc_pix_map_by_pixelformat(vcap->format.pixelformat);
> -
> vcap->format.bytesperline = vcap->format.width * vpix->bpp;
> vcap->format.sizeimage = vcap->format.bytesperline *
> vcap->format.height;
>
Regards,
Hans
next prev parent reply other threads:[~2017-06-12 9:58 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1491604632-23544-1-git-send-email-helen.koike@collabora.com>
[not found] ` <1496458714-16834-1-git-send-email-helen.koike@collabora.com>
2017-06-03 2:58 ` [RFC PATCH v3 01/11] [media] vimc: sen: Integrate the tpg on the sensor Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 02/11] [media] vimc: Move common code from the core Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 03/11] [media] vimc: common: Add vimc_ent_sd_* helper Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 04/11] [media] vimc: common: Add vimc_pipeline_s_stream helper Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 05/11] [media] vimc: common: Add vimc_link_validate Helen Koike
2017-06-12 9:50 ` Hans Verkuil
2017-06-12 17:20 ` Helen Koike
2017-06-13 6:37 ` Hans Verkuil
2017-06-03 2:58 ` [RFC PATCH v3 06/11] [media] vimc: sen: Support several image formats Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 07/11] [media] vimc: cap: " Helen Koike
2017-06-12 9:58 ` Hans Verkuil [this message]
2017-06-03 2:58 ` [RFC PATCH v3 08/11] [media] vimc: Optimize frame generation through the pipe Helen Koike
2017-06-06 14:11 ` Helen Koike
2017-06-12 10:03 ` Hans Verkuil
2017-06-12 19:24 ` Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 09/11] [media] vimc: Subdevices as modules Helen Koike
2017-06-12 10:37 ` Hans Verkuil
2017-06-12 20:35 ` Helen Koike
2017-06-13 6:49 ` Hans Verkuil
2017-06-13 13:23 ` Helen Koike
2017-06-13 14:08 ` Hans Verkuil
2017-06-03 2:58 ` [RFC PATCH v3 10/11] [media] vimc: deb: Add debayer filter Helen Koike
2017-06-03 2:58 ` [RFC PATCH v3 11/11] [media] vimc: sca: Add scaler Helen Koike
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ef11f98-4f67-69e4-9d2d-e644054d3f7c@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=helen.koike@collabora.com \
--cc=jgebben@codeaurora.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mchehab@osg.samsung.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®