From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Samuel Chessman <chessman@tux.org>, netdev@vger.kernel.org
Subject: [PATCH 1/3] drivers/net/tlan: Remove TRUE/FALSE defines, use bool
Date: Tue, 12 Jan 2010 22:59:13 -0800 [thread overview]
Message-ID: <5effdf5b333df0f28b6426082da278936fa480d4.1263365754.git.joe@perches.com> (raw)
In-Reply-To: <cover.1263365754.git.joe@perches.com>
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/tlan.c | 28 ++++++++++++++--------------
drivers/net/tlan.h | 3 ---
2 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index fabaeff..bbcac3b 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -338,7 +338,7 @@ static int TLan_PhyInternalService( struct net_device * );
static int TLan_PhyDp83840aCheck( struct net_device * );
*/
-static int TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
+static bool TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
static void TLan_MiiSendData( u16, u32, unsigned );
static void TLan_MiiSync( u16 );
static void TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
@@ -2204,7 +2204,7 @@ TLan_ResetAdapter( struct net_device *dev )
u32 data;
u8 data8;
- priv->tlanFullDuplex = FALSE;
+ priv->tlanFullDuplex = false;
priv->phyOnline=0;
netif_carrier_off(dev);
@@ -2259,7 +2259,7 @@ TLan_ResetAdapter( struct net_device *dev )
TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
} else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
- priv->tlanFullDuplex = TRUE;
+ priv->tlanFullDuplex = true;
} else {
TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
}
@@ -2651,14 +2651,14 @@ static void TLan_PhyStartLink( struct net_device *dev )
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
} else if ( priv->speed == TLAN_SPEED_10 &&
priv->duplex == TLAN_DUPLEX_FULL) {
- priv->tlanFullDuplex = TRUE;
+ priv->tlanFullDuplex = true;
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
} else if ( priv->speed == TLAN_SPEED_100 &&
priv->duplex == TLAN_DUPLEX_HALF) {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
} else if ( priv->speed == TLAN_SPEED_100 &&
priv->duplex == TLAN_DUPLEX_FULL) {
- priv->tlanFullDuplex = TRUE;
+ priv->tlanFullDuplex = true;
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
} else {
@@ -2695,7 +2695,7 @@ static void TLan_PhyStartLink( struct net_device *dev )
tctl &= ~TLAN_TC_AUISEL;
if ( priv->duplex == TLAN_DUPLEX_FULL ) {
control |= MII_GC_DUPLEX;
- priv->tlanFullDuplex = TRUE;
+ priv->tlanFullDuplex = true;
}
if ( priv->speed == TLAN_SPEED_100 ) {
control |= MII_GC_SPEEDSEL;
@@ -2750,9 +2750,9 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
mode = an_adv & an_lpa & 0x03E0;
if ( mode & 0x0100 ) {
- priv->tlanFullDuplex = TRUE;
+ priv->tlanFullDuplex = true;
} else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
- priv->tlanFullDuplex = TRUE;
+ priv->tlanFullDuplex = true;
}
if ( ( ! ( mode & 0x0180 ) ) &&
@@ -2855,8 +2855,8 @@ void TLan_PhyMonitor( struct net_device *dev )
* TLan_MiiReadReg
*
* Returns:
- * 0 if ack received ok
- * 1 otherwise.
+ * false if ack received ok
+ * true if no ack received or other error
*
* Parms:
* dev The device structure containing
@@ -2875,17 +2875,17 @@ void TLan_PhyMonitor( struct net_device *dev )
*
**************************************************************/
-static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+static bool TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
{
u8 nack;
u16 sio, tmp;
u32 i;
- int err;
+ bool err;
int minten;
TLanPrivateInfo *priv = netdev_priv(dev);
unsigned long flags = 0;
- err = FALSE;
+ err = false;
outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
@@ -2918,7 +2918,7 @@ static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
}
tmp = 0xffff;
- err = TRUE;
+ err = true;
} else { /* ACK, so read data */
for (tmp = 0, i = 0x8000; i; i >>= 1) {
TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
diff --git a/drivers/net/tlan.h b/drivers/net/tlan.h
index 4b82f28..d13ff12 100644
--- a/drivers/net/tlan.h
+++ b/drivers/net/tlan.h
@@ -31,9 +31,6 @@
*
****************************************************************/
-#define FALSE 0
-#define TRUE 1
-
#define TLAN_MIN_FRAME_SIZE 64
#define TLAN_MAX_FRAME_SIZE 1600
--
1.6.6.rc0.57.gad7a
next prev parent reply other threads:[~2010-01-13 6:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-13 6:59 [PATCH 0/3] A few #define TRUE/FALSE removals Joe Perches
2010-01-13 6:59 ` Joe Perches [this message]
2010-01-14 4:40 ` [PATCH 1/3] drivers/net/tlan: Remove TRUE/FALSE defines, use bool David Miller
2010-01-13 6:59 ` [PATCH 2/3] drivers/isdn/mISDN/dsp_ecdis.h: Remove #define TRUE/FALSE, " Joe Perches
2010-01-13 6:59 ` [PATCH 3/3] drivers/media/dvb/frontends/si21xx.c: " Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5effdf5b333df0f28b6426082da278936fa480d4.1263365754.git.joe@perches.com \
--to=joe@perches.com \
--cc=chessman@tux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®